Bedienungsanleitung Panasonic KX-UDT121 (Seite 17 von 66) (Englisch)

619774

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Handset Functions

Setting the Password

The handset password is not set by default. You must

cannot use the following features without setting a

password:

– Phonebook lock (See "Locking the Handset

Phonebook (Page 38)".)

– "Manual&Password" or "Auto&Password" for

Key Lock Type (See "Key Option (Page 49)".)

– Reset Handset (See "Other Option (Page 52)".)

To set

1. Press

or the [CENTRE] navigation key.

2. Select " Setting Handset" by pressing the

arrow keys, and then press .

3. Press [ ] or [ ] to select "Other Option", and

then press .

4. Press [ ] or [ ] to select "Change Password",

and then press .

5. Enter a new password (4 digits [0–9]).

6. Verify the password by entering it again as in step

Note

• To avoid unauthorised access to this product:

– Set a password that is random and cannot

be easily guessed.

– Change the password regularly.

• Make a note of the password so that you will not

forget it.

Key Lock

You can lock all keys other than the Navigator Key while

the handset is in standby mode. One of 4 key lock types

can be selected. For details, see "Key Option

(Page 49)".

To lock

Press and hold or the [CENTRE] navigation key

for more than 2 seconds to lock the handset keys.

The icon will be displayed to indicate that the

keys are locked.

To unlock

To unlock the handset keys, press and hold

the [CENTRE] navigation key for more than 2 seconds.

The icon will change to to indicate the keys

have been unlocked.

Note

• If you select "Manual&Password" or

"Auto&Password" for Key lock type, you need

to enter the password to unlock the handset.

• If no password has been set, you cannot select

"Manual&Password" or "Auto&Password"

for Key lock type. To set the password, see

"Setting the Password (Page 17)".

Silent Mode

Silent Mode turns off the ringer and sets the handset to

vibrate when calls are received. This can be useful in

situations where you do not want to be disturbed, such

as during a meeting.

When Silent Mode is active, the following features are

turned off or set as specified automatically, regardless

of their settings.

– Ringer Volume

– Ring On Charger

– Auto Answer

– Key Tone

– Vibrate (Vib.& Ring)

To set or cancel

To set or cancel Silent Mode, press and hold for

more than 2 seconds.

Note

• If you set the handset on the charger during

Silent Mode, the handset will not vibrate.

• When Silent Mode is set, the Low Battery Alarm

will not be heard in standby mode.

• When Silent Mode is set, confirmation sounds

for setting the ring pattern or ring volume will not

play.

Please note that if you set the handset on the charger while

receiving an incoming call, vibration will stop. Once the vibration

stops, the handset will not vibrate again for that call, even if the

handset is lifted up again. (If Quick Answer is set, lifting up the

handset will answer the call.)

Document Version 2012-11 Operating Instructions 17

Before Operating the Telephone

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-UDT121 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic KX-UDT121

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info