Bedienungsanleitung Panasonic KX-UT248 (Seite 29 von 100) (Englisch)

520236

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Feature Operations

Note

• If KX-UT113/KX-UT123/KX-UT133/KX-UT136

is connected to a Panasonic

KX-NS1000 PBX,

refer to the documentation of the KX-NS1000

for information about the operation of the unit.

However, please refer to this documentation for

details about the following features:

– Phonebook (Page 29, 40)

– Call Log (Page 30)

Making Calls

This section explains the basic methods for making a

call.

Making a Call

1. In stand-by mode, go off-hook.

2. Enter the number you want to call.

3. Press [ENTER], or wait a few seconds for the

number to be dialled.

4. To end the call, go on-hook.

Note

• For KX-UT113/KX-UT123,

if more than one line

is available at your unit, you can press

Line

before going off-hook and then select the line

you want to use.

• For KX-UT133/KX-UT136/KX-UT248, if more

than one line is available at your unit, you can

press an idle DN button (flexible button)

assigned to the line you want to use before

entering the number. For details about DN

buttons, see "Flexible Buttons (KX-UT133/

KX-UT136/KX-UT248 only) (Page 39)".

Pre-dialling

In stand-by mode, you can start dialling (max. 32 digits)

while still on-hook.

• To delete a number you entered, press

Clear

• To clear the entire number, press and hold

Clear

• To

connect the call, go off-hook or press [ENTER].

Note

• For KX-UT133/KX-UT136/KX-UT248, you can

also

press an idle DN button (flexible button) to

connect the call. For details about DN buttons,

see "Flexible Buttons (KX-UT133/KX-UT136/

KX-UT248 only) (Page 39

)".

• For KX-UT113/KX-UT123, when pre-dialling

you can press

Call

instead of going off-hook.

If more than one line is available at your unit,

select

the line to use, and then press [ENTER].

• If you receive an incoming call during

pre-dialling, the display changes to the

incoming call screen. For KX-UT133/

KX-UT136/KX-UT248, you can close the

incoming call screen by pressing

End

, and

continue pre-dialling.

Making a Call from the

Phonebook List

Scrolling through all entries

1. Press

2. Press [ ] or [ ] to select an entry.

3. Go off-hook.

4. To end the call, go on-hook.

Note

• For KX-UT133/KX-UT136/KX-UT248, you can

also press an idle DN button (flexible button) in

step 3 to connect the call. For details about DN

buttons, see "Flexible Buttons (KX-UT133/

KX-UT136/KX-UT248 only) (Page 39)".

• For KX-UT113/KX-UT123, you can press

Call

instead of going off-hook. If more than

one line is available at your unit, select the line

to use, and then press [ENTER].

• In step 2, if multiple phone numbers are stored

for the entry, you can press

Number

and then

select the phone number to call.

Searching by name

1. Press

2. Press

3. Enter the name (max. 12 characters) you want to

search for.

4. Press [ENTER].

The entry that matches your search appears.

5. Go off-hook.

6. To end the call, go on-hook.

Note

• For KX-UT113/KX-UT123, you can press

Call

instead of going off-hook. If more than

Document Version 2013-03 Operating Instructions 29

Feature Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-UT248 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic KX-UT248

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info