Bedienungsanleitung Panasonic KX-VC300 (Seite 118 von 172) (Englisch)

628266

118

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Making H.323 Settings

Note

• These settings can only be made in IP mode

(Page 115)

and when "H.323" is set to "ON" on

the call type settings screen.

• When connecting to an MCU by entering the

MCU’s conference room number@IP address,

"SIP Server" (Page 116) and "Gatekeeper"

must be set to "OFF".

• If video conference calls cannot be made

because there is a problem with the gatekeeper

and H.460 server, the H.323 settings are

incorrect (on the gatekeeper and the H.460

server, or on the unit), etc., "Not registered"

will be displayed on the Home screen instead of

the H.323 extension/H.323 name. In this case,

you cannot make calls using either IP

addresses or the gatekeeper and H.460 server.

Contact your network administrator.

1. Log in to the administrator menu (Page 112).

• The administrator menu screen is displayed.

2. Press [

• The second page is displayed.

3. Use [

][ ]

to select "H.323 Settings" and press

[Enter].

• The H.323 settings screen is displayed.

4. Use [ ][ ]

to select the following items for input:

"Gatekeeper": Use [

][ ] to select "ON" or

"OFF" (default).

Note

• This setting is available only when "ON" is

selected for "H.323" (Page 116) and

"OFF" is selected for "SIP Server" (Page

116).

"Gatekeeper Address

": Enter the gatekeeper’s IP

address (or host name).

Note

• If the IP address contains 1 or 2 digit

numbers,

enter these numbers as they are.

Do not enter like [.001].

Example: The IP address is [192.168.0.1].

– Correct entry: [192.168.0.1]

– Wrong entry: [192.168.000.001]

• The DNS server setting is necessary to

enter host names (Page 97).

• See Page 40 for details about the

characters that can be input for host names.

"H.323 Name": Enter the H.323 name.

Alphanumeric characters and the symbols . = * + _

- $

! ? / ' ( ) can be entered (up to 60 characters).

"H.323 Extension": Enter the H.323 extension.

Numeric characters and the symbols # and * can be

entered (up to 20 characters).

Note

• Enter a standards-compliant value. For

details,

contact your network administrator.

"Authentication": Use [

][ ] to select whether

to enable authentication.

– "ON": Enables authentication.

– "OFF" (default): Disables authentication.

"Authentication ID": Enter an authentication ID

(1–60 characters [alphanumeric, space, symbols])

(Page 137). &, <, >, comma (,), double quotation

mark (") cannot be entered.

"Authentication Password": Enter an

authentication password

(0–60 characters

[alphanumeric, space, symbols]) (Page 137). &, <,

>, comma (,), double quotation mark (") cannot be

entered.

Note

• "Authentication ID" and "Authentication

Password" can only be set when

"Authentication" is set to "ON".

• While being entered, the characters of the

authentication password are displayed, but

once the settings are saved, all the

characters

will be displayed as asterisks (*),

and you will no longer be able to check the

authentication password on the screen.

Record the authentication password

beforehand, and store it in a safe location.

118 User Manual Document Version 2013-09

Contacts and Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-VC300 Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info