628266
161
Zoom out
Zoom in
Vorherige Seite
1/172
Nächste Seite
Message Cause and Solution
Sub-Camera source is not
compatible.
A cable or cord is not properly connected.
Check that all cables to the unit are connected properly
(Page 84).
The signal input from the sub video camera is invalid.
A valid signal cannot be received from the connected sub video camera.
Contact your dealer.
Check display resolution.
The computer’s display resolution or refresh rate is incompatible with
the unit.
Set
your computer’s resolution and refresh rate to a setting compatible
with the unit (Page 78).
If any of the other parties is using a software version older than 3.00
(not including 3.00), you cannot use HD or WXGA for PC input
resolutions.
Set your computer’s resolution to VGA, SVGA, or XGA (Page 78).
n is already in use.
Note
The IP address is
represented by n.
On the network you are using, another device is already using the IP
address you have input for the unit.
Make sure that all devices on the network have unique IP addresses
assigned.
Cooling Fan Malfunction.
Please turn off the system
and call for service.
The CPU cooling fan within the device has stopped.
Quickly turn off the power. Contact your dealer.
Check main camera setting.
<Check camera>
Set the main camera
HDMI output to 1080i.
<Safe Mode>
If [#] is pressed, the system
enters
safe mode after restart.
A
standard definition (640 ´ 480p, 720 ´ 480p) video camera signal has
been detected.
Change the video camera’s resolution to HD (1920 ´ 1080i).
Note
If you enter Safe Mode during a video conference call, the call will
be disconnected.
Check main camera setting.
<Check camera>
Set camera operating
frequency to nHz.
<Safe Mode>
If [#] is pressed, the system
enters
safe mode after restart.
Note
The field frequency
setting of the unit (50
or 60) is represented
by n.
A video camera with a different field frequency to the unit has been
detected.
Use a video camera with the same field frequency as the unit.
Note
If you enter Safe Mode during a video conference call, the call will
be disconnected.
Check sub camera setting.
<Check camera>
Set the sub camera HDMI
output to 1080i.
<Safe Mode>
If [#] is pressed, the system
enters
safe mode after restart.
A
standard definition (640 ´ 480p, 720 ´ 480p) video camera signal has
been detected.
Change the video camera’s resolution to HD (1920 ´ 1080i).
Note
If you enter Safe Mode during a video conference call, the call will
be disconnected.
Document Version 2013-09 User Manual 161
Additional Information
161

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic KX-VC300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info