Bedienungsanleitung Panasonic KX-VC600 (Seite 41 von 172) (Englisch)

628265

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Making a Video Conference Call

You can make a video conference call using one of the following methods.

Note

• During a video conference call, you cannot perform the following operations:

– Pressing [Menu] to display the Menu screen.

– Pressing [Contact] to display the contact list screen.

• Make sure that peripheral devices

(e.g., display, main video camera) are turned on.

• If a called party does not answer a video conference call within approximately 60 seconds, the call will

be terminated automatically.

• If you are using the KX-VC300, 3-party/4-party video conference calls can only be made after

purchasing an activation key card (KX-VCS301) to activate multiple-party video conference calls

(Page 127). For details about the activation key, contact your dealer.

• 2-party/3-party/4-party video conference calls can be made using the outgoing call history.

• Only 2-party video conference calls can be made using the incoming call history.

• You cannot add parties to an existing video conference call.

• During a 3-party/4-party video conference call, even if only one party ends the video conference call,

the rest of the parties will also be disconnected.

• A video conference call will start with only the parties that answered the call. For example, if only one

party answers a 4-party video conference call, the video conference call will start as a 2-party video

conference call.

• 3-party/4-party video conference calls may not be possible depending on bandwidth settings

(Page 99, Page 132).

• Video conference calls can be made using a SIP URI through a SIP server only when in IP Mode and

if SIP settings have been made correctly.

• Video conference calls can be made using an H.323 extension or H.323 name only when in IP Mode

and if the gatekeeper settings have been made correctly.

• Video conference calls cannot be made if the call type programmed in the speed dial (SIP or H.323)

has been set to "OFF" on the call type settings screen.

• When connecting to non-Panasonic video conference systems or using H.323, you can make only

2-party video conference calls.

• When you use the contact list or speed dial to call a party stored in the contact list with

"Multi-Point" set to "No", the maximum bandwidth setting that is assigned to each address in the

contact list is used for the call (Page 92). When calling a party in the call history that matches a party

in the contact list, the maximum bandwidth setting that is assigned to each address in the contact list

is used for the call.

Calling Using Speed Dial (2-party Conference/3-party Conference/

4-party Conference)

Note

• To call using speed dial, you need to have a speed dial number programmed in "Speed Dial" in the

contact list (Page 92).

Document Version 2013-09 User Manual 41

Starting a Video Conference

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KX-VC600 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info