Bedienungsanleitung Panasonic KXFB421 (Seite 85 von 92) (Englisch)

16783

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

FCC Information

FCC Inform ation

List of FCC requirements and information

If required by the telephone company, inform them

of the following.

• FCC Registration No.:

(found on the rear of the unit)

• Ringer Equivalence No.:

(found on the rear of the unit)

• The particular telephone line to which the

equipment is connected.

This unit must not be connected to a coin operated

line. If you are on a party line, check with your local

telephone company.

Ringer Equivalence Number (REN):

This REN is useful in determining the quantity of

devices you may connect to your telephone line

and still have all of those devices ring when your

telephone number is called. In most but not all

areas, the sum of the REN’s of all devices

connected to one line should not exceed five (5.0).

To be certain of the number of devices you may

connect to your line, as determined by the REN,

you should contact your local telephone company

to determine the maximum REN for your calling

area.

In the event that terminal equipment causes harm

to the telephone network, the telephone company

should notify the customer, if possible, that service

may be stopped. However, where prior notice is

impractical, the company may temporarily cease

service providing that they:

a) Promptly notify the customer.

b) Give the customer an opportunity to correct the

problem with their equipment.

c) Inform the customer of the right to bring a

complaint to the Federal Communication

Commission pursuant to procedures set out in

FCC Rules and Regulations Subpart E of Part 68.

The Telephone Company may make changes in its

communications facilities, equipment operations,

or procedures where such action is reasonably

required in the operation of its business and is not

inconsistent with the rules and regulations in FCC

Part 68. If such changes can be reasonably

expected to render any customer terminal

equipment incompatible with telephone company

communications facilities, or require modification or

alteration of such terminal equipment, or otherwise

materially affect its use or performance, the

customer shall be given adequate notice in writing,

to allow the customer an opportunity to maintain

uninterrupted service.

CAUTION:

Any changes or modifications not expressly

approved by the party responsible for compliance

could void the user’s authority to operate this

device.

When programming emergency numbers and/or

making test calls to emergency numbers:

1. Remain on the line and briefly explain to the

dispatcher the reason for the call before hanging

up.

2. Perform such activities in the off-peak hours;

such as early morning or late evenings.

This telephone provides magnetic coupling to

hearing aids.

NOTE:

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

—

Reorient or relocate the receiving antenna.

—

Increase the separation between the equipment

and receiver.

—

Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

—

Consult the dealer or an experienced radio/TV

technician for help.

A TIA/EIA-IS-968 compliant telephone cord and

modular plug is provided with this equipment. This

equipment is designed to be connected to the

telephone network or premises wiring using a

compatible modular jack that is also TIA/EIA-IS-

968 compliant. See Installation Instructions for

details.

The software contained in (insert specific

equipment type or features) to allow user access to

the network must be upgraded to recognize newly

established network area codes and exchange

codes as they are placed into service.

Failure to upgrade the premises systems or

peripheral equipment to recognize the new codes

as they are established will restrict the customer

and the customer’s employees from gaining access

to the network and to these codes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic KXFB421 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info