Bedienungsanleitung Panasonic Lumix DMC-GF2C (Seite 45 von 218) (Englisch)

452010

Zoom out

Zoom in

Vorherige Seite

1/218

Nächste Seite

- 45 -

Basic

Note

•

The flash setting is fixed to [Œ].

• Audio will not be recorded for 0.5 seconds after it starts recording if the motion picture button is

kept pressed. Release the motion picture button right after you press it.

• The operational sound of the zoom or button operation may be recorded when it is operated

during the recording of a motion picture.

• The available recording time displayed on the screen may not decrease regularly.

• Depending on the type of the card, the card access indication may appear for a while after

recording motion pictures. This is not a malfunction.

• When the aspect ratio setting is different in still and motion pictures, the angle of view changes

at the start of motion picture recording. When [ REC AREA] (P145) is set to [ ], angle of

view during motion picture recording is displayed.

• When the [EX. TELE CONV.] is set to [ON], the angle of view will change when the screen is

switched between the still picture screen and motion picture screen, because the zoom factor is

different between still pictures and motion pictures. (P69)

• The ISO sensitivity will be set to [AUTO] (for motion pictures) when recording motion pictures.

• When recording a motion picture, [STABILIZER] will be fixed to [MODE1] even if it is set to

[MODE2] or [MODE3].

• When recording motion pictures, the following functions cannot be used.

– [ ] in the AF Mode

(It will switch to Multi Auto Focus Mode for motion pictures.)

– Direction Detection Function

– [FACE RECOG.]/[ISO LIMIT SET]

• It is recommended to use a fully charged battery or AC adaptor (optional) when recording

motion pictures. (P191)

• If while recording motion pictures using the AC adaptor (optional) the power supply is cut off

due to a power cut or if the AC adaptor (optional) is disconnected etc., the motion picture being

recorded will not be recorded.

• Motion pictures recorded in [AVCHD] or [MOTION JPEG] may be played back with poor

picture or sound quality or playback may not be possible even when played back with

equipment compatible with these formats. Also, the recording information may not be

displayed properly. In this case, use this unit.

For details on AVCHD compatible devices, refer to the support site below.

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

• The sound recording specifications on this model have been changed to improve audio

quality. For this reason, some motion pictures recorded in [MOTION JPEG] and pictures

with audio may not be played back with Panasonic digital cameras (LUMIX)

(Motion pictures recorded with a Panasonic digital camera (LUMIX) can be played back

on this model.)

¢ Models launched before December 2008, and some models launched in 2009 (FS, LS

series).

• To play back AVCHD motion pictures recorded with this unit on Panasonic Blu-ray Disc Players

(DMP-BD30/DMP-BD31/DMP-BD50) it is necessary to update the firmware of the Blu-ray Disc

Player.

You can download the latest firmware version from the following website.

http://panasonic.net/support/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic Lumix DMC-GF2C Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic Lumix DMC-GF2C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info