Bedienungsanleitung Panasonic Lumix DMC-LS2 (Seite 4 von 104) (Englisch)

103520

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Before Use

VQT0V10

-If you see this symbol-

∫ Care of the camera

• Do not strongly shake or bump the

camera. The camera may stop operating

normally, pictures may not be recorded or

the lens may be damaged.

• Sand or dust may cause the camera to

malfunction. Make sure that sand or

dust does not get into the lens or the

terminals when using the camera on a

beach etc.

• Make sure that water does not get into the

camera when using it on a rainy day or on

a beach.

• If water or seawater splashes on the

camera, wet a soft cloth with tap water,

wring it well and use it to wipe the

camera body carefully. Then, wipe the

camera again with a dry cloth.

∫ About the LCD monitor

• Do not press the LCD monitor with

excessive force. Uneven colors may

appear on the LCD monitor and it may

malfunction.

• Condensation may form on the LCD

monitor in places with large temperature

differences. Wipe the condensation with a

soft, dry cloth.

• If the camera is cold when you turn it on,

the picture on the LCD monitor will be

slightly darker than usual at first. However,

the picture will return to normal brightness

when the internal temperature of the

camera increases.

∫ About the Lens

• Do not press the lens with excessive

force.

• Do not leave the camera with the lens

facing the sun as it may cause the camera

to malfunction. Also, be careful when you

leave the camera outside or near a

window.

∫ About Condensation (When the lens

is fogged up)

• Condensation occurs when the ambient

temperature or humidity changes as

described below. Be careful of

condensation since it causes lens stains,

fungus and camera malfunction.

– When the camera is taken from the cold

outdoors to the warm indoors.

– When the camera is taken from outside

to inside an air-conditioned car.

– When cool wind from an air conditioner

etc. blows directly on the camera.

– In humid places

• To prevent condensation, put the camera

in a plastic bag until the temperature of

the camera is close to the ambient

Information on Disposal in other

Countries outside the European

Union

This symbol is only valid in the European

Union.

If you wish to discard this product, please

contact your local authorities or dealer

and ask for the correct method of

disposal.

Extremely high precision technology is

employed to produce the LCD monitor

screen. However there may be some

dark or bright spots (red, blue or green)

on the screen. This is not a malfunction.

The LCD monitor screen has more than

99.99% effective pixels with a mere

0.01% of the pixels inactive or always lit.

The spots will not be recorded on

pictures on the built-in memory or a

card.

VQT0V10ENG.book 4 ページ２００５年１２月２７日　火曜日　午後８時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic Lumix DMC-LS2 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic Lumix DMC-LS2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info