Bedienungsanleitung Panasonic Lumix DMC-LS2 (Seite 13 von 104) (Englisch)

103520

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Preparation

VQT0V10

• Batteries with the covering partly or fully

peeled off. Never use these batteries.

(Refer to the illustration below.)

∫ Battery indication

The remaining battery power appears on

the LCD monitor. [It does not appear when

using the AC adaptor (DMW-AC6;

optional)].

• The battery indication turns red and

blinks. (The status indicator blinks when

the LCD monitor is turned off.)

• Replace with new batteries or fully

charged Ni-MH batteries.

∫ Proper Care and Handling of Batteries

Mishandling batteries may cause leakage,

heat generation, fire or explosion. Observe

the following.

• Do not splash batteries with water/sea

water or wet battery terminals.

• Do not peel off or scratch the covering on

batteries.

• Do not drop, throw or subject batteries to

other strong impacts.

• Do not use batteries that show signs of

leakage, deformation, discoloration etc.

• Do not store batteries in high humidity

areas or high temperatures.

• Keep batteries away from children.

• Always use 2 new batteries of the same

type when replacing batteries.

• Remove the batteries if you do not intend

to use the unit for a long time.

• Batteries may heat up soon after you start

using the unit. Turn the camera off and

wait until the battery temperature

decreases before removing them.

• Battery performance deteriorates and

recording/playback time decreases when

the ambient temperature is low [10 °C

(50 °F) or less]. This is particularly true

when using oxyride or alkaline batteries

so warm them in your pocket etc. before

using them. Make sure that no metal

objects such as a lighter are placed

together with the batteries when warming

them in your pocket.

• If there is grease or dirt on the battery

poles, the recording/playback time may

become extremely short. Before inserting

the batteries, clean the battery terminals

with a soft, dry cloth.

∫ Ni-MH Batteries (Nickel Metal Hydride)

You can use Ni-MH batteries after charging

them with a nickel metal hydride battery

charger. However, improper handling of the

batteries may cause leakage, heat

generation, fire or explosion. Observe the

following.

• If there is dirt on the battery poles, you

may not be able to charge normally. Clean

the battery poles and the battery

recharger terminals with a soft, dry cloth.

• When charging batteries for the first time,

or after having not used them for a long

period of time, they may not charge fully.

This is a feature of Ni-MH batteries and is

not a malfunction. Battery performance

• All or part of the

covering on the

battery is peeled

off.

• The - pole is flat.

If battery leakage occurs, remove the

batteries and thoroughly wipe the leakage

in the battery compartment. Insert new

batteries or fully charged Ni-MH batteries.

If battery electrolyte spills on your hands

or clothes, thoroughly wash them with

water. Battery electrolyte can cause loss

of sight if it comes into contact with your

eyes. Do not rub your eyes. Wash them

immediately with clean water and consult

a doctor.

VQT0V10ENG.book 13 ページ２００５年１２月２７日　火曜日　午後８時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic Lumix DMC-LS2 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic Lumix DMC-LS2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info