Bedienungsanleitung Panasonic Lumix DMC-LS70 (Seite 50 von 120) (Englisch)

103532

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

VQT1C63

Advanced-Shooting

Sunset mode

Use to take pictures of the sunset. Sunset

color can be reproduced vividly.

• The ﬂ ash setting is ﬁ xed to Forced OFF

[v].

• The setting on the AF assist lamp is

disabled.

• ISO sensitivity is ﬁ xed to [ISO100].

•

You cannot change the white balance setting.

Baby mode 1

Baby mode 2

Adjusts the exposure and tone to bring

out the healthy color of your baby’s skin.

The ﬂ ash will be weaker than normal if you

choose to use it.

You can set the birthdays of two babies

by using [BABY1] and [BABY2]. You can

display the set age when playing back

the pictures and imprint the age on the

recorded pictures with [DATE STAMP]

(P75).

• You can also use the [LUMIX Simple

Viewer] or [PHOTOfunSTUDIO-viewer-]

software on the included CD-ROM to

print your baby’s age. (For details, refer

to the separate operating instructions for

PC connection.)

■ Age display setting

• To show age, ﬁ rst enter the birthday,

select [WITH AGE], and press [MENU/

SET].

■ Birthday setting

1 Select [BIRTHDAY SET.] and press

[MENU/SET].

2 [PLEASE SET THE BIRTHDAY OF THE

BABY] appears. Select year/month/day

with w/q and change the date with e/r.

3 Press [MENU/SET] to exit.

• Focus range is 5 cm (0.16 feet) (Wide)/30

cm (0.98 feet) (Tele) to Z.

• Sensitivity will be the same as when you

have set ISO LIMIT in Intelligent ISO

mode [ ] (P45) to [ISO400].

• After turning on the camera in [BABY1]/

[BABY2] in scene mode, the age, current

date, and time appear for about 5

seconds at the bottom of the screen.

• Actual age displays depend on the

[LANGUAGE] setting.

• Check the clock and birthday settings if

the age shown is incorrect.

• Note that if you select [WITHOUT AGE],

age information is not recorded. The

information will not appear even if you

select [WITH AGE] after taking pictures.

• To reset the birthday setting, use

[RESET] in the [SETUP] menu. (P23)

• The digital zoom is ﬁ xed to [OFF].

Pet mode

Suitable for taking pictures of your pet.

Keep a record of your pet’s development

by adding the date. You can display the set

age when playing back the pictures and

imprint the age on the recorded pictures

with [DATE STAMP] (P75).

• Displays and settings are the same as

for the baby modes. For details on how

to set age and birthday, see [BABY1]/

[BABY2].

• You can also use the [LUMIX Simple

Viewer] or [PHOTOfunSTUDIO-viewer-]

software on the included CD-ROM to

print the pet’s age. (For details, refer to

the separate operating instructions for

PC connection.)

SET

Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P47)

BABY1

SELECT SET

WITH AGE

WITHOUT AGE

BIRTHDAY SET.

CANCEL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic Lumix DMC-LS70 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic Lumix DMC-LS70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info