Bedienungsanleitung Panasonic Lumix DMC-LZ4 (Seite 91 von 112) (Englisch)

103548

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Others

VQT0U87

Message Display

Confirmation messages or error messages

will be displayed on the screen in some

cases.

The major messages are described below

as examples.

[CURRENT BATTERY TYPE SETTING:

OXYRIDE]/[CURRENT BATTERY TYPE

SETTING: ALKALINE/Ni-MH]

This message is displayed the first time you

insert batteries and when the batteries are

exhausted and you replace them. If the

battery type being used is different from the

one indicated in the message, change the

battery type in [BATTERY TYPE] in the

[SETUP] menu. (P21)

[THIS MEMORY CARD IS PROTECTED]

The Write-Protect switch on the SD

Memory Card is moved to [LOCK]. Move

the switch back to unlock it. (P18, 74)

[NO VALID PICTURE TO PLAY]

Record a picture or insert a card with a

recorded picture and then play it.

[THIS PICTURE IS PROTECTED]

Delete or overwrite the picture after

canceling the protect setting. (P74)

[THIS PICTURE CANNOT BE DELETED]/

[SOME PICTURES CANNOT BE

DELETED]

Pictures not based on the DCF standard

cannot be deleted. If you want to delete

some pictures, format the card after saving

necessary data on a PC etc. (P78)

[NO ADDITIONAL DELETE SELECTIONS

CAN BE MADE]

You have exceeded the number of pictures

that can be set at once with

[MULTI DELETE]. Delete the selected

pictures and then select [MULTI DELETE]

again to delete any remaining pictures.

More than 999 favorites have been set.

[CANNOT BE SET ON THIS PICTURE]/

[CANNOT BE SET ON SOME PICTURES]

If the pictures are not based on the DCF

standard, the DPOF print cannot be set.

[NOT ENOUGH SPACE ON BUILT-IN

MEMORY]/[NOT ENOUGH MEMORY IN

THE CARD]

There is no space left on the built-in

memory or the card.

• When you copy pictures from the built-in

memory to the card (batch copy), the

pictures are copied until the capacity of

the card becomes full.

[SOME PICTURES CANNOT BE

COPIED]/[COPY COULD NOT BE

COMPLETED]

The following pictures cannot be copied.

• When a picture with the same name as

the picture to be copied exists in the copy

destination.

• Files not based on the DCF standard.

Moreover, pictures recorded or edited by

other equipment may not be copied.

[BUILT-IN MEMORY ERROR

FORMAT BUILT-IN MEMORY?]

This message will be displayed when you

format the built-in memory on the PC or

remove the batteries without turning the

camera off. Format the built-in memory on

the camera again. (P78) The data on the

built-in memory will be deleted.

[MEMORY CARD ERROR

FORMAT THIS CARD?]

The card format cannot be recognized by

the camera. Format the card again with the

camera after saving necessary data on a

PC etc. (P78)

[PLEASE TURN CAMERA OFF AND

THEN ON AGAIN]

This message appears when the camera is

not operating properly. Turn the camera off

and on. If the message persists, contact the

dealer or your nearest servicenter.

VQT0U87ENG.book 91 ページ２００５年１２月２７日　火曜日　午後７時１２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic Lumix DMC-LZ4 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic Lumix DMC-LZ4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info