471641
40
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
78 VQT3H08 VQT3H08 79
Recording the place of recording with GPS
(Continued)
Recording Mode:
For [GPS] menu setting procedures (38)
Changing the recorded place name information
If there are other candidate locations for the positioning results, you can change the
information to nearby place names or landmarks.
When other place name information can be selected, appears in front of the place
name information.
Select [GPS Area Select] from the [GPS] menu
Use cursor button to select the item to change and press
[MENU/SET]
Use cursor button to select the place name or landmark from
the displayed candidates, and then press [MENU/SET]
If you do not wish to record place names and landmarks
In step , select [Delete all place-names] and place names and landmarks will not be
recorded.
Or, in step , if you select [Yes] when a message asking whether to delete place
names and landmarks lower than the selected place name, information of the place
name will not be recorded (e.g., [City/Town/Village] and [Landmark] when [County/
Township] is deleted).
However, longitude and latitude will be recorded. If you do not wish to record them,
turn [GPS Setting] to [OFF].
To return place names and landmarks set to not be recorded to the original setting
(i.e., to record the place names and landmarks), perform [GPS Area Select] again.
In large public parks or similar locations, landmarks may not be displayed, or
incorrect landmarks may be displayed. If you cannot select the desired landmark in
[GPS Area Select], perform [My Landmark] (80) before recording or [Place-Name
Edit] (107) after recording.
Executing positioning immediately and updating your current location
If there is a discrepancy in the displayed information such as the location name or if
positioning has failed, move to a place where the signals from the GPS satellite can be
received more easily, and update the positioning.
Select [Repositioning] from the [GPS] menu
Positioning starts.
The GPS status indicator lights during positioning.
GPS status indicator
When you select [GPS] or in the [GPS Setting] displayed in the Quick menu
(41) and close the Quick menu, positioning will be executed.
Concerning the positioning intervals
Even if you do not manually update positioning, positioning is attempted automatically
immediately after the power has been turned on and at a fixed intervals after that
unless [GPS Setting] is [OFF].
When [GPS Setting] is [ON], positioning is tried at fixed time intervals even when the
power is off.
However, positioning is cancelled under the following conditions.
When the battery power is low and has appeared.
When the power has not been turned on for a certain length of time.
To display the GPS reception status
Select [GPS Setting] from the [GPS] menu.
Use the cursor button to select [INFO] and press [MENU/SET].
You can start positioning by pressing [MENU/SET] again.
GPS reception status display
: Received GPS time
: Number of GPS satellite signals received
: Latitude
Longitude
Downloaded from www.Manualslib.com manuals search engine
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-lumix-dmc-tz20

Suche zurücksetzen

  • Stecker vom Verbindungskabel zur Kamera zeigt nicht mehr, oder ist defekt.
    Eingereicht am 28-6-2021 14:30

    Antworten Frage melden
  • Kamera macht mehrere Bilder, wie kann ich auf einzelbilder kommen
    Eingereicht am 7-6-2021 08:54

    Antworten Frage melden
  • Wie kann man an der Lumix20 die Serienbilder ausschalten.
    Eingereicht am 4-6-2021 11:49

    Antworten Frage melden
  • Bildinformationen sollen beim Ausdrucken nicht mitgedruckt werden Eingereicht am 24-4-2020 16:23

    Antworten Frage melden
  • Warum kann ich die Bilder nicht auf den PC scannen. Bis jetzt ging es problemlos, plötzlich geht nichts mehr, der Bildschirm bleibt schwarz, obschon auf der Kamera steht: Zugriff auf den PC OK Eingereicht am 25-2-2018 15:57

    Antworten Frage melden
  • Was kann ich tun bei Systemfehler Schärfeeinstellung?

    Eingereicht am 1-7-2017 22:06

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic Lumix DMC-TZ20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic Lumix DMC-TZ20

Panasonic Lumix DMC-TZ20 Bedienungsanleitung - Deutsch - 76 seiten

Panasonic Lumix DMC-TZ20 Bedienungsanleitung - Holländisch - 76 seiten

Panasonic Lumix DMC-TZ20 Bedienungsanleitung - Französisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info