Bedienungsanleitung Panasonic MW20GC (Seite 25 von 28) (Englisch)

608252

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

VQT2Z88

Reference

Using in a wall-mounted state / Maintenance

Maintenance

Unplug the AC adaptor from the household mains socket

and wipe it using a soft and dry cloth.

When the dirt is heavy, wring water out of a wet cloth to

wipe the dirt and then wipe with a dry cloth.

Do not use solvents including benzine, thinner, alcohol,

kitchen detergent, etc. This might cause the exterior case

to be deformed or the coating to come off.

Before using chemically treated cloth, read the instructions

that come with the cloth carefully.

Information for Users on Collection and Disposal of

Old Equipment and used Batteries

These symbols on the products, packaging,

and/or accompanying documents mean that

used electrical and electronic products and

batteries should not be mixed with general

household waste.

For proper treatment, recovery and

recycling of old products and used

batteries, please take them to applicable

collection points, in accordance with your

national legislation and the Directives

2002/96/EC and 2006/66/EC.

By disposing of these products and

batteries correctly, you will help to save

valuable resources and prevent any

potential negative effects on human health

and the environment which could otherwise

arise from inappropriate waste handling.

For more information about collection and

recycling of old products and batteries,

please contact your local municipality, your

waste disposal service or the point of sale

where you purchased the items.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

For business users in the European

Union

If you wish to discard electrical and

electronic equipment, please contact your

dealer or supplier for further information.

[Information on Disposal in other

Countries outside the European Union]

These symbols are only valid in the

European Union. If you wish to discard

these items, please contact your local

authorities or dealer and ask for the correct

method of disposal.

Note for the battery symbol (bottom two

symbol examples):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

•

Safety cautions

WARNING!

Only a qualiﬁ ed building contractor shall install or

uninstall this unit.

Improper installation may cause the unit to fall, resulting in

injury.

To prevent injury, the unit must be securely attached

to the wall in accordance with the installation

instructions.

Do not install the unit where it cannot support the load.

If the mounting parts are not strong enough, this may

cause the unit to fall, resulting in injury.

Do not use installation methods other than instructed.

This may cause the unit to fall and be damaged, resulting

in injury.

Do not install the unit at locations other than vertical

walls.

This may cause the unit to fall and be damaged, resulting

in injury.

Take the safety factor for mounting strength into

account (approx. 10 times the product weight).

Insufﬁ cient strength will cause the unit to fall, resulting in

injury.

The wall on which the unit is to be attached to should

be capable of supporting 5 kg per screw.

Insufﬁ cient strength of the walls will cause the unit to fall in

the long run.

Do not disassemble or modify the wall-mounting hanger.

This will cause the unit to fall and be damaged, resulting

in injury.

CAUTION!

Do not install this unit at humid or dusty locations, or

locations where airborne grease or steam may come

into contact with the unit, or under an air conditioner

where water may drip onto the unit.

This may have negative impact on the unit, resulting in ﬁ re

or electric shock.

Secure enough space of more than 25.4 mm above the

main unit and more than 25.4 mm on the left and right

sides respectively. Keep space between the wall and

rear of the unit clear of obstructions.

Blocking the exhaust holes on the main unit may result in

ﬁ re.

Use the designated components for installation.

Otherwise, the main unit may fall and be damaged,

resulting in injury.

Prevent the mounting screws or power cord from

coming into contact with metal parts inside the wall

during installation.

Failure to do so may cause electric shock.

When removing the main unit, remove the wall

mounting screws as well.

Otherwise the wall mounting screws may hit a person and

lead to injury.

Install the unit at a height where the SD card slot can

be seen for safe operation.

Operating at improper position may cause the unit to fall

and be damaged, resulting in injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic MW20GC Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info