Bedienungsanleitung Panasonic MW20GN (Seite 18 von 28) (Englisch)

608253

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

VQT2Z88

Using the timer

The power is automatically turned on at the set time and

photos or audio are played. The power is automatically

turned off at the end time.

“Timer 1”, “Timer 2” and “Timer 3” can be set.

The following explains the case when setting “Timer 1” as an

example.

Set the clock. (¼P7)

Select the photo category.

Prepare playback sources on an iPod/iPhone.

1. Press [MENU].

2. Press [e, r, w, q] to select “Settings Menu” and

press [OK].

3. Press [e, r, w, q] to select “Timer” and press

[OK].

4. Press [w, q] to select “Timer 1 Settings” and

press [OK].

Timer Setting Menu

Select Item

Timer 1 Settings

Timer 2 Settings Timer 3 Settings

0123186 9 15 21

Sun

Mon

Tue

Thu

Fri

Sat

Wed

5. Press [e, r] to select “Standby” and press [OK].

6. Press [e, r] to select “Enable This Timer” and

press [OK].

7. Press [e, r] to select “Day” and press [OK].

8. Press [e, r] to select the day, add the check

mark with [w, q] and press [OK].

9. Press [e, r] to select “Time” and press [OK].

10. Press [e, r, w, q] to set the start/end time and

press [OK].

11. Press [e, r] to select “Conﬁ rm” and press [OK].

If the operation time overlaps other timer settings,

“The set time overlaps with another timer. Do you

want to give priority to this timer and register it?”

appears.

If “Yes” is selected, other timers with the overlapped

time are disabled.

If “No” is selected, the previous screen is restored

with the timer setting contents saved.

Timer 1 Settings

Select Item

Day

Time

Standby

Enable

Off

Mon Tue Wed Thu Fri

7 : 00 - 10 : 00

Audio Playback

Confirm

A

A To set audio playback ¼ P19

•

12. Press [MENU] to close the menu screen.

•

Audio playback settings

You can make the settings for display at the time of audio

playback of the iPod/iPhone. You can also set the sound

quality for your preference.

Basic operation

1. Press [MENU].

2. Press [e, r, w, q] to select “Audio Menu” and

press [OK].

Select Item

Audio Menu

Settings Menu

3. Press [e, r] to select the item (¼below) and

press [w, q] to select the setting.

4. Press [MENU] to close the menu screen.

Factory settings are indicated with underlines.

Play Mode

¼P17

Repeat

¼P17

Audio Information

Displays audio information

currently playing while the display

categories other than “iPod

Display” are set.

On: Display

Off: No display

Equalizer

Flat:

When the sound quality effect is

not used.

Heavy:

Emphasises the bass sound with

sharp sound quality.

Clear:

Emphasises the treble range with

clear sound quality.

iPod Information

Displays the model name and

version of the connected

iPod/iPhone.

Note

Depending on the track for playback, the equalizer effect

may be less noticeable even if the “Equalizer” setting is

changed.



•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic MW20GN Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info