Removing the anchor bolts
Four anchor bolts keep the interior of the
appliance in place while the appliance
is being moved. Remove them before
installation, using a spanner. Follow the
following instructions.
Note
The anchor bolts must be removed
before the appliance is operated.
They may cause excessive vibration.
Use the spanner to loosen the four 1.
bolts.
Rotate the bolts anti-clockwise.
Pull the bolts out horizontally.2.
Push each cover cap (included with 3.
the accessories) over each bolt hole.
Note
Make sure that you store the anchor
bolts, because they are used when
transporting the appliance. If the
appliance is passed on to another
person, make sure to give the anchor
bolts to that person.
Moving the appliance
Note
Make sure to install the anchor bolts in
the appliance.
Before you move the appliance
Shut the tap and run the appliance to -
drain the water. Drain any remaining
water from the drain filter. (See page
23.)
Depressurize the water-supply hose and -
remove it.
Disconnect the power cable. -
Install the anchor bolts. (See page 33.) -
