734754
21
Zoom out
Zoom in
Vorherige Seite
1/35
Nächste Seite
– 21 –
D. Programming Memory Pads for 2 to 5 Stage Heating
1. Follow Steps 1-5 in “C. Programming Memory Pads for Single Stage Heating” on
page 20.
2. Select Power Level for the second stage by touching Power Level Selector Pad.
The selected Power Level will be displayed in the window and the second stage
heating indicator “2” will start to blink.
[Example]: Touch Power Level Selector Pad once for P10 power.
3. Set the desired heating time by touching appropriate Number Pads.
Note: The maximum set time for P1 and P0 is 30 minutes, and
15 minutes for all others.
However, the TOTAL TIME can be set up to 25 minutes for continuous
heating (1 to 5 stage heating) that excludes P1 and P0.
[Example]: Touch Number Pads “2”, “0” and “0” for 2 minutes.
4. Touch Prog Pad again and the “PROG” sign and the second stage heating
indicator “2” will stop blinking. The total time for both stages will be displayed.
This means that you have completed programming the desired Memory Pad for
the second stage heating.
5. 3 seconds after programming is completed, “0” will appear.
6. Program the remaining pads as desired by repeating the Steps above.
Note: Repeat the above procedure to set Heating for the third stage and later
stages.
E. Memory Pad Heating
1. Open the door.
The oven lamp will turn on. “0” will appear in the Digital Display Window.
Note: While “0” will appear, operation is available. 1 minute after the door is
closed, “0” will disappear.
2. Put the food into a suitable container, place it in the centre of the oven and then
close the door securely.
The oven lamp will turn off.
3. Touch the desired Memory Pad.
A. The currently programmed information will be indicated.
[Example]: Touch Memory Pad “5” (Program No. A-5).
The total number of stages is displayed as in the bottom.
The heating program (at P1 power for 1 minute, at P10 power for
2 minutes) as programmed on pages 20-21 is set.
Note: To use B or C side Program, touch Shift (A/B/C) Pad before touching
Program Number Pad.
4. Touch Start Pad.
A. During operation, the indicator appears in order from the left.
B. The heating time will count down.
When touching Power Level Selector Pad, the current power level will be
displayed for 3 seconds.
C. When touching Start Pad, the current stage number will be displayed for
3 seconds instead of Program No.
(Continued on next page.)
How to Operate
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic NE-1878 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info