30
•Select the desired Auto Sensor program, by
pressing the pad. The pad can be pressed
once, twice or three times to select the
programs available.
•Press Start. The food category will be
repeated in the display window until the oven
calculates the cooking time after detecting a
burst of steam. DO NOT open the oven door
until the remaining cooking time appears in
the display window.
This feature allows you to cook or reheat fifteen foods automatically. There is no need to enter
the weight, as these programs use a humidity sensor which will automatically select the correct
Microwave power level and calculate the correct cooking time.
Once the food has been selected and the start pad pressed the food is heated up. As food
begins to get hot, steam is emitted. When the food reaches a certain temperature and begins to
cook, an even greater amount of steam is released. The increase in steam emission is detected
by a humidity sensor in the oven. This acts as a signal for the oven to calculate how much longer
the food needs to cook. The remaining cooking time will appear in the display window after two
beeps.
Whilst the Sensor program is still in the display window the oven door SHOULD NOT BE
OPENED. Wait until the cooking time appears in the window, and then open the door if required,
to stir or turn the food.
IMPORTANT NOTE: For best results the Sensor programs should only be used when the oven
is cold. It is recommended that the oven is allowed to cool between using
the sensor programs, if one or more programs are being used (see note
below). If in a hurry, cook the food manually i.e. select the correct power
level and cooking time. It is not recommended to keep using the Auto
Programs consecutively.
Adjust to Taste
The Sensor programs cook
foods for average tastes. You
are able to adjust the cooking
programs to your own taste by
pressing the MORE/LESS pad.
After selecting the Sensor
program, but BEFORE pressing
START. The oven will
automatically cook the food 20%
More or 20% Less.
