48
CARD ERROR:
This Card is not compatible with
this Movie Camera.
COPY INHIBITED:
Because the medium is protected
by a copy guard, images cannot be
recorded correctly.
CAN NOT CHANGE MODE:
The Mode of the Movie Camera can
not be changed in the PC
connection Mode.
DISCONNECT DV CABLE:
If the Movie Camera is in Photo
Title (CAMERA mode) and the DV
Interface Cable is connected,
“DISCONNECT DV CABLE”
appears. In this case, remove the
DV Interface Cable from the Movie
Camera.
DISCONNECT USB CABLE:
If you are attempting to record from
a Cassette by pressing the PHOTO
SHOT Button when the USB Cable
is connected, “DISCONNECT USB
CABLE” appears. In this case,
remove the USB Cable from the
Movie Camera.
PICTURE (Blink during 3 seconds):
When making DV connection at the
time of M-CARD mode.
WEBCAM (Blink during 3 seconds):
When making DV connection at the
time of Web Camera mode.
STORAGE (Blink during 3 seconds):
When making DV connection at the
time of USB Device Drive/SD Drive.
Notes and Hints
ª Selecting Remote Controller
Modes
When 2 Movie Cameras are used simultaneously,
they can be operated individually by selecting
different Remote Controller Modes.
≥If the Remote Controller Mode of the Movie
Camera and that of the Remote Controller do not
match, [REMOTE] Indication is displayed.
Setup on the Movie Camera:
Set [REMOTE] on the [OTHER FUNCTIONS]
Sub-Menu to the desired Remote Controller
Mode. (l 16)
Setup on the Remote Controller:
[VCR1]: Press the [D] Button and [∫] Button
simultaneously.
[VCR2]: Press the [E] Button and [∫] Button
simultaneously.
≥When the battery in the Remote Controller is
replaced, the mode is automatically reset to
[VCR1] Mode.
ª Concerning the Power Supply
≥When the Movie Camera is used for a long time,
the Camera body becomes warm, but this is not
a malfunction.
≥If the [CHARGE] Lamp does not light up
although the Battery is attached to AC Adaptor,
detach the Battery and reattach it.
≥Battery CGP-D110 and CGP-D105 cannot be
charged with this AC Adaptor.
ª Inserting/Removing the Cassette
≥If a new Cassette is inserted, rewind to the
beginning of the tape before starting recording.
≥When inserting the cassette, make sure it faces
in the right direction and then push it in until it
stops.
ª Alarm Sounds
When [BEEP SOUND] on the
[OTHER FUNCTIONS] Sub-Menu on the
[CAMERA FUNCTIONS] Main-Menu is set to
[ON], confirmation/alarm beeps are issued as
follows.
1 Beep
≥When you start recording.
≥When you switch the [VCR/OFF/CAMERA/
M-CARD] Switch from [OFF] to Camera Mode or
Card Recording Mode.
2 Beeps
≥When you pause recording.
4 Beeps
≥If you perform a wrong operation before or
during recording.
B-Eng.book 48 ページ ２００３年２月１４日 金曜日 午後２時４３分
