Bedienungsanleitung Panasonic nv fj 628 (Seite 20 von 24) (Englisch)

135564

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Power save: To reduce the VCR’s power consumption

when the VCR is switched off.

• Set Power save mode as follows:

[ON]: The power consumption is greatly reduced when

the VCR is turned off.

[OFF]: The power consumption is not reduced when the

VCR is turned off.

Refer to the followings when [Power save] is set to [ON].

• [VCR display] is automatically set to [OFF].

• To turn the VCR on, keep the [VCR-ON/OFF]

(1)

pressed on the

VCR main unit. It is not possible to turn it on with the remote

control.

• The Power save function does not work in the timer recording

standby mode. After all programmed timer recordings have been

made, and after all programmed data have been erased, the VCR

switches over to the Power save mode.

• When the VCR is off, Pay TV programmes cannot be watched on

the TV because the signal from the connected decoder is not

looped through. To watch them, turn on the VCR.

(For NV-FJ732EE and NV-FJ632EE)

VCR display: For automatic change of the brightness of

the VCR display when the VCR is switched

off.

• Set the brightness of the VCR display as follows:

[ON]: Indications are brightly lit.

[OFF]: Indications are not lit.

[DIMMED]: Indications are dimly lit.

OSD: For automatic display on the TV screen of

the TV station information, type of sound

system of the programme being watched

and the sound playback mode.

(See page 21.)

• Set OSD mode as follows:

[4:3]: Indications can be displayed on the TV screen.

[16:9]: Indications can be displayed on the TV screen

when using wide type of TV screen and selecting

the wide screen mode on the TV setting.

• Even if setting to [16:9], indications may be cut off depending on

the TV.

[OFF]: No indications appears.

AV2: To select the type of external source

equipment which is connected to the VCR’s

AV2 21-pin socket. (For NV-FJ732EE and

NV-FJ632EE)

• Set the external source equipment as follows:

[DECODER]: When a decoder is connected.

[EXT LINK 1]: When a digital receiver which transmits a special

control signal recordings via the 21-pin Scart

cable, for example the F.U.N. receiver

(TU-DSF30/S3) is connected for the linked timer

recordings. (See page 12.)

[EXT LINK 2]: When an external equipment with a timer function

is connected for the linked timer recordings.

(See page 12.)

[EXT]: When another VCR or a satellite receiver is

connected.

AV: To select the type of external source

equipment which is connected to the VCR’s

AV1 21-pin socket. (For NV-FJ628EE)

• Set the external source equipment as follows:

[TV/EXT]: When TV, another VCR or a satellite receiver is

connected.

[EXT LINK 1]: When a digital receiver which transmits a special

control signal recordings via the 21-pin Scart

cable, for example the F.U.N. receiver

(TU-DSF30/S3) is connected for the linked timer

recordings. (See page 12.)

[EXT LINK 2]: When an external equipment with a timer function

is connected for the linked timer recordings.

(See page 12.)

TV system: To select the type of colour TV system to be

used during playback or during recording

from an external source.

• Set the colour TV system as follows:

[AUTO]: Normally set to this position.

[PAL]: When PAL system is used.

[MESECAM]: When SECAM system is used.

RFC system: To set RFC system the same as the TV

system of the connected TV.

• Set the type of RFC system as follows:

[BG]: PAL B.G.H/SECAM B.G

[DK]: PAL D/SECAM D.K. K1

[I]: PAL I

Remote: To set the Remote control mode.

(For NV-FJ732EE)

• Set the Remote control mode as follows:

[VCR 1]: Select this setting on both the VCR and the

remote control for normal use with one VCR.

[VCR 2]: Select this setting on both the VCR and the

remote control when using this VCR and another

Panasonic VCR in the same place. This ensures

that you can operate both VCRs independently

with their respective remote control. It also allows

you to operate both VCRs with a single remote

control, simply by changing the remote control

mode on the remote control.

• To change the remote control mode on the remote control itself,

change the position of the [VCR 1/2] (16) to match the setting. If

these settings are not matched, the remote control cannot be used

to operate the VCR.

4) Press the [OK] (24) to conclude the setting.

(Press it twice on the Remote control setting.)

5) Press the [EXIT] (27) to exit the On Screen Display.

Language or Country Setting

1) Press the [MENU] (7) to display the Main menu on the

TV screen.

2) Press the [Cursor] (38) 34 to

select [Other settings]. Press the

[OK] (24) to display Other

settings menu.

3) Press the [Cursor] (38) 3421

to select [Language] or [Country]

and the entry field for [Language] or [Country] in this

order.

4) Press the [Cursor] (38) 34 to select the desired

language or country.

5) Press the [OK] (24) to conclude the setting.

6) Press the [EXIT] (27) to exit the On Screen Display.

TV system

RFC system

Remote

Language

Country

:AUTO

:DK

: VCR 1

: English

: others

Other settings

Panasonic VCR

2/2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic nv fj 628 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info