Bedienungsanleitung Panasonic nv fj 631 (Seite 6 von 16) (Englisch)

135093

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

OTR Function

(OTR = One Touch Recording)

To record for a specific length of time,

press this button on the VCR.

You can extend the recording time

from 30, 60, 120, 180 to 240 minutes

by pressing the button repeatedly. To stop in advance press

The selected length of recording time will appear on the VCR display.

With the On Screen Menu you can programme

Timer recordings (up to 16 programmes).

Switch on the TV to the video output channel, and insert

a cassette with an intact erasure prevention tab into the VCR.

Set the remote control to VCR operation.

Recording

VQT9524

n Switch on the VCR

n Press to display

[Timer recording] menu

n Set the channel

You can use the cursors

:;8 9

on the remote control to move around the menu,

in order to make changes.

n Set the recording date, day or week. For example:

Sa means that the programme will be recorded

every Saturday, or Mo - Sa means that the programme

will be recorded every day from Monday to Saturday.

Su=Sunday, Mo=Monday, Tu=Tuesday, We=Wednesday,

Th=Thursday, Fr=Friday, Sa=Saturday

n Set the start time.

If you keep this button pressed down,

the time will change in 30 minute jumps.

n Set the stop time.

n Set the Tape Speed SP/LP/EP or A (automatic).

See also the description for Recording.

n In the setting A (automatic), the VCR automatically switches

(with a short picture distortion) to the slow tape speed LP,

to record the programme as long as possible .

n The preset [VPS / PDC] settings, can be manually changed

(for NV-FJ631, NV-FJ630, NV-FJ626).

[ON] The broadcaster is providing VPS / PDC signals.

If the program is starting earlier or later than planned

the timer recording will be synchronised

to the actual broadcast start.

Important ! The time and the date settings must be exact

same as programme information (programme magazine).

If there is an special VPS / PDC time noted, it must be used.

(The recording can not start, if the settings are not exact.)

[- - -] The broadcaster is not providing VPS / PDC signals.

[OFF] The broadcaster is providing VPS / PDC signals,

but the function is set off.

With this settings you have to add to the start and stop time,

that the whole film can be recorded completely,

in case the film is broadcasted out of the planned start time.

n To check the Remaining tape time,

look at the VCR display REMAIN.

Make sure that the remaining time

on the cassette is longer than the time set for recording,

otherwise the whole programmes cannot be recorded.

n To store the programme, press

n In order to preset other recordings, repeat this procedure.

n Press to switch the VCR

to Standby mode for Timer recording.

Make sure that the VCR display

appears.

n Switch on the TV to the video output channel, and insert

a cassette with an intact erasure prevention tab into the VCR.

n Before recording, select the channel.

Select the AV channel if you

want to record a programme

fed with a 21-pin Scart cable.

n Press to start recording.

n Press the Stop Button

to stop recording.

n Use button to pause recording.

n Restart recording by pressing this button again.

To preserve the video heads, the function

will be switched off after 5 minutes.

Note:

These functions can be also used with the VCR buttons:

(rec), (pause), (stop) and (channel)

VCR display

Erasure prevention of a cassette

To prevent the accidental erasure of a cassette,

remove the erasure prevention tab.

If you want to record again on a cassette

with erasure prevention, and this

symbol

is flashing on the VCR display,

then cover the hole with adhesive tape.

If you want to watch another TV programme at the same time

as you are recording, select the channel on the TV.

Tape Speed

Press this button before recording, in order to select

the tape speed for the recording.

The following information appears on the VCR display :

SP standard recording time: optimum picture quality.

LP double recording time: slightly reduced picture quality.

EP (SUPER LP) triple recording time: slightly reduced picture quality.

Note:

Distorted pictures produced when playing back some cassettes

(e.g. type E300) after LP or EP recordings are not functional faults.

Timer Recording with On Screen Menu

Direct TV Recording (for NV-FJ631, NV-FJ630, NV-FJ626)

This button allows you to immediately start recording the

same programme that you are viewing on the TV, if your TV is equipped

with Q Link or with a similar function from other manufacturers (see page 3)

and connected with a fully-wired 21-pin Scart cable (not supplied).

Panasonic VCR

Timer recording 1/2

Pos Start Stop VPS

Name DATE ON OFF PDC

***

32 Mo-Sa 13:30 14:00 LP ON

***

32 20/9 15:00 16:00 SP OFF

3. - - - - - - -/- - - -:- - - -:- - - - - - -

Recording

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic nv fj 631 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic nv fj 631

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info