22
Notes
≥Do not disconnect USB Connection Cable while
the operation light of the Movie Camera is on. It
may freeze the software or destroy the data in
transfer. Please refer to the Operating Instructions
of Movie Camera.
≥If you use Windows Me/98SE, the message, “File
is not found” may be displayed when the Movie
Camera is connected for the first time. Enter the
following paths to complete the connection: If the
message “MTDV98M3.pdr is not found” is
displayed, enter
“C:\WINDOWS\system\IOSUBSYS”. If the
message “MTDV98M3.sys is not found” is
displayed, enter
“C:\WINDOWS\system32\DRIVERS”.
(The paths will differ depending on the
environment of your personal computer.)
≥When the Movie Camera is switched to the
PC Accessing Mode while it is connected to the
personal computer, the operation mode of the
Movie Camera cannot be switched. In this case,
disconnect the USB Connection Cable. Switch the
operation mode of the Movie Camera and
reconnect the Cable.
≥If the Movie Camera is connected in the
PC Accessing Mode, the [Removable Disk] icon
representing the Memory Card drive is displayed
in [My Computer].
≥If the Movie Camera is used as a Web Camera,
the quality of the video to be exchanged will
depend on the Internet connection status.
≥If the USB Connection Cable is disconnected from
the personal computer, the WEB CAMERA mode
is cancelled.
≥In the WEB CAMERA mode, video (picture)
cannot be recorded onto a tape or a card.
≥In the WEB CAMERA mode, the audio may be
interrupted in the midway of communication
depending on the communication environment or
the performance of the personal computer.
≥When the Tape Recording Mode of the Movie
Camera is switched to the PC Accessing Mode, a
warning message may be displayed. You may
simply ignore it.
≥When you are using Windows XP or Windows
2000, you may install or uninstall this software
after logging on by setting the user name to
Administrator or to a user name having equivalent
authority.
≥If the Movie Camera is used as a Web Camera
while virus checking software is running, the Movie
Camera’s operation may stop midway through. In
this case, exit the Windows Messenger, reconnect
the Movie Camera and restart the
Windows Messenger.
≥We recommend using AC adapter as the power
source for the Movie Camera when using USB
Connection Kit. Data may be lost if the battery
power is lost while transferring.
≥Do not delete the folders in memory card. Memory
card may not be recognized if deleted.
≥If you install the USB Driver while the USB
Connecting Cable is being connected, or if you
don’t follow these Operating Instructions, the
Movie Camera will not be recognized correctly. In
this case, delete the USB Driver from [Device
Manager] as described below, uninstall the USB
Driver, and re-install it.
1Set the Movie Camera to Tape Recording Mode
or Tape Playback Mode, connect it to the
personal computer, and delete [Panasonic DVC
USB-SERIAL Driver for Win XX (COM X)] (or
[Panasonic Serial USB Driver]) from [Device
Manager]. The numeral designation after “Win
XX” will differ depending on the OS. (Win 98,
Win Me, Win XP)
2Set the Movie Camera to PC Accessing Mode
and delete [Panasonic DVC SD Disk Drive]. (If
you use Windows 98SE, also delete [Panasonic
DVC USB Storage].)
EB.book 22 ページ ２００５年４月１１日 月曜日 午前１１時１０分
