614030
30
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
VCR Mode
-30-
Finding the End of Recording
(Blank Search Function)
The Blank Search Function aids you locate the
end of the recording on the Cassette quickly.
1 Set [VCR FUNCTIONS] >>
[PLAYBACK FUNCTIONS] >>
[BLANK SEARCH] >> [YES].
The [BLANK] Indication appears during the
Blank Search.
Approximately 1 second before the last
recorded scene, the Movie Camera switches
to the Still Playback Mode.
If there is no blank portion left on the
Cassette, the Movie Camera stops at the end
of the tape.
To Cancel Blank Search Before Completion
Press the [] Button.
Index Search Functions
To facilitate searching of desired scene, this
Movie Camera automatically records index
signals during recording, as explained in the
following.
Photoshot Index Signal
These signals are automatically recorded
whenever still pictures are taken in Photoshot
Mode. (
-18-) Photoshot Index Signals are not
recorded on still pictures recorded in Continuous
Photoshot Mode.
Scene Index Signal
Scene Index Signals are automatically recorded
when you start recording after inserting a
Cassette.
If [SCENE INDEX] of [RECORDING SETUP]
Sub-Menu on the [CAMERA FUNCTIONS]
Main-Menu is set to [2HOUR], an index signal is
recorded when recording is restarted after an
elapse of 2 hours or longer. If it is set to [DAY],
an index signal is recorded when recording is
restarted after the date has changed since the
last recording. (While the index signal is
recorded, the [INDEX] Indication flashes for a
few seconds.)
M
E
N
U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(40) (32)
INDEX
If the Movie Camera is switched from the VCR
Mode to Camera Mode or if the date and time is
set before the start of recording, the index
signal is not recorded.
ª Photoshot Index Search
1 Set [VCR FUNCTIONS] >>
[PLAYBACK FUNCTIONS] >> [SEARCH] >>
[PHOTO].
2 Press the [9] Button or [:] Button (55)
on the Remote Controller.
With each press of the corresponding button,
still pictures recorded in Photoshot Mode are
searched.
Sounds are played back for approximately
4 seconds.
ª Scene Index Search
1 Set [VCR FUNCTIONS] >>
[PLAYBACK FUNCTIONS] >> [SEARCH] >>
[SCENE].
2 Press the [9] Button or [:] Button (55)
on the Remote Controller.
When the corresponding button is pressed
once, the [S 1] Indication appears, and
searching of the subsequent scene marked with
an index signal starts. Each time the button is
pressed after the start of Scene Index Search,
the indication changes from [S 2] to [S 9], and
the beginning of the scene corresponding to the
selected number will be searched.
Up to 9 scene numbers can be selected.
M
E
N
U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(40) (32)
INDEX INDEX
SELECT
STOP
KL
V
/REW
STILL ADV
W
s
V
PLAY
PAUSE
FF/
W
STILL ADV
61 5
;
ED
(55) (55)
S 1
30B-ENG.book 30 ページ 2003年1月23日 木曜日 午後8時46分
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic NV-GS30 B wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info