53884
21
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
21
Power save: To reduce the VCRs power
consumption when the VCR is
switched off.
Set Power save mode as follows:
[ON]: The power consumption is greatly
reduced when the VCR is turned off.
[OFF]: The power consumption is not
reduced when the VCR is turned off.
Refer to the followings when [Power save] is set to
[ON].
[VCR display] is automatically set to [OFF].
To turn the VCR on, keep the [VCR-ON/OFF] button
pressed on the VCR main unit. It is not possible to
turn it on with the remote control.
The Power save function does not work in the timer
recording standby mode. After all programmed timer
recordings have been made, and after all
programmed data have been erased, the VCR
switches over to the Power save mode.
When the VCR is off, Pay TV programmes cannot be
watched on the TV because the signal from the
connected decoder is not looped through. To watch
them, turn on the VCR.
VCR display: For automatic change of the
brightness of the VCR display when
the VCR is switched off.
Set the brightness of the VCR display as follows:
[ON]: Indications are brightly lit.
[OFF]: Indications are not lit.
[DIMMED]: Indications are dimly lit.
AV2: To select the type of external
source equipment which is
connected to the VCRs AV2 21-pin
socket.
Set the external source equipment as follows:
[DECODER]: When a decoder is connected.
[EXT LINK 1]: When a digital receiver which
transmits a special control signal
recordings via the 21-pin Scart
cable, for example the F.U.N.
receiver (TU-DSF30/S3) is
connected for the linked timer
recordings. (See page 13.)
[EXT LINK 2]: When an external equipment with a
timer function is connected for the
linked timer recordings.
(See page 13.)
[EXT]: When another VCR or a satellite
receiver is connected.
TV system: To select the type of colour TV
system to be used during playback
or during recording from an external
source.
Set the colour TV system as follows:
[AUTO]: The VCR automatically
distinguishes PAL, SECAM/
MESECAM system. If the picture
lacks colour, set to [PAL] or
[MESECAM].
[PAL]: When PAL system is used.
[MESECAM]: When SECAM system is used.
RFC system: To set RFC system the same as the
TV system of the connected TV.
Set the type of RFC system as follows:
[BG]: PAL B.G.H/SECAM B.G
[DK]: PAL D/SECAM D.K.K1.
[I]: PAL I
NTSC playback: To play back a video cassette
recorded in the NTSC signal.
Set the type of colour TV system as follows:
[PAL TV]: For TVs that can receive PAL
signal.
[4.43]: For TVs that can receive NTSC 4.43
signal.
Press the [OK] button to conclude the setting.
Press the [EXIT] button to exit the On Screen Display.
Language or Country Setting
Press the [MENU] button to display the Main menu
on the TV screen.
Press the [Cursor] buttons 34
to select [Other settings].
Press the [OK] button to display
Other settings menu.
Press the [Cursor] buttons 3421 to select
[Language] or [Country] and the entry field for
[Language] or [Country] in this order.
Press the [Cursor] buttons 34 to select the desired
language or country.
Press the [OK] button to conclude the setting.
Press the [EXIT] button to exit the On Screen Display.
Tape length
OSD
Power save
VCR display
AV2
TV system
RFC system
NTSC playback
Language
Country
: AUTO (2 E-240)
: 4:3
: OFF
: DIMMED
: DECODER
: AUTO
: DK
: PAL TV
: English
: others
Other settings
Panasonic VCR
MENU
OK
OK
EXIT
EXIT
OK
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic NV-HS820EE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info