Bedienungsanleitung Panasonic NV-HS820EG (Seite 10 von 26) (Englisch)

53886

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

REC

SP/LP/EP

REC

OSD/DISPLAY

REC/OTR

TRACKING/V-LOCK

–

Recording

Insert a video cassette with an intact erasure prevention

tab.

– If it has already been inserted, press the [VCR-ON/

OFF] button to turn the VCR on.

Select the TV station using the

[Channel] button. (Set the [VCR/TV]

switch to [VCR].)

– It is also possible to select by

pressing the [Numeric] buttons.

Press the [REC] button to start

recording.

Press the [Stop] button to stop recording.

To Select the Desired Tape Speed

Press the [SP/LP/EP] button before

recording.

– SP provides standard recording time

and optimum picture quality.

LP provides double recording time with slightly

reduced picture quality.

EP provides triple recording time with slightly reduced

picture quality.

To Pause Recording

Press the [Pause/Slow] button during

recording.

Press it again to continue recording.

To View One TV Programme while

Recording Another TV Programme

After pressing the [REC] button to start recording, select

on your TV the programme position of the TV

programme that you want to view.

Notes:

– When playing back an E300 cassette recorded in the LP or

EP mode, some picture distortion may occur. However, this

is not a malfunction.

– The recording pause mode will be automatically cancelled

after 5 minutes and return to the stop mode.

– The tape recorded in the EP mode on this VCR cannot be

played back on the other VCR without EP mode function.

– On the other VCR (even with EP mode function), when you

play back the tape recorded in the EP mode, the picture

may be distorted. However, this is not a malfunction.

To Display the Approximate Remaining

Tape Time

See page 20 to set the tape length.

Press the [OSD/DISPLAY] button repeatedly until the

remaining tape time appears on the VCR display.

– Pressing the [OSD/DISPLAY] button once makes the

On Screen Display appear; after that, pressing it

repeatedly changes the indication in the following

order.

– For certain cassettes, the remaining tape time may

not be displayed correctly.

Clock#Counter#Remaining Tape Time#Clock

To Select the Recording Duration and

Perform Timer Recording

(OTR=One-Touch Recording)

Press the [REC/OTR] button to start recording.

Press the [REC/OTR] button

on the VCR repeatedly to

select the desired recording duration.

– Every time you press this button, the recording

duration indicated in the VCR display changes in the

following order.

Counter display (normal recording mode)

#30 (min.)#60 (min.)#120 (min.)

#180 (min.)#240 (min.)

#Counter display (normal recording mode)

To stop the OTR recording before the end

Press the [Stop] button.

Note:

– This function also works during Direct TV Recording.

To Prevent Accidental Erasure of Recorded

Contents

Break out the erasure prevention tab

after recording.

If you insert a video cassette with a

broken out erasure prevention tab and

press the [REC] button, the [1]

indication flashes on the VCR display

to indicate that recording is not

possible.

In this case, cover the tab hole with

two layers of adhesive tape.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NV-HS820EG Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info