Bedienungsanleitung Panasonic nv vhd1 (Seite 12 von 24) (Englisch)

136817

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Connecting with S-VIDEO lead

The S-VIDEO terminal achieves a more vivid picture

than the VIDEO OUT terminal (only DVD out).

Connecting with Audio / Video cable

Connect the Audio / Video cable (white=L, red=R, yellow=video) according

to the colours / markings of the terminals.

Note: Do not connect the unit through another video cassette recorder.

Connect directly to the TV, otherwise the picture may not be displayed

correctly due to the copy guard.

Connecting External Equipment

If your TV is supporting RGB, then connect a 21 pin scart lead with

AV1 (TV) to reach the best picture quality for DVD playback,

For RGB setting see page 18.

Analogue recording: You can record to a Mini Disc (MD) or audio cassette

or connect to a Dolby Pro Logic amplifier.

Connecting with Optical digital audio lead

n Select [Yes] in [PCM Down conversion] (see page 18).

n Adjust the settings to suit the equipment you have connected.

Note: You cannot use DTS Digital Surround decoders not suited to DVD.

You can record the digital signal directly onto an MD. The recording

equipment should handle a sampling frequency of 48 kHz/16 bit .

Change the settings in the SETUP menu [AUDIO] as follows.

PCM Down conversion: [Yes] Dolby Digital: [PCM]

DTS Digital Surround: [Off] MPEG : [PCM]

Note: VCR audio signal is not connected to DVD OUT terminal.

Insert fully,

with this side facing up

Connecting an Active subwoofer

You can enjoy more powerful bass by connecting an active subwoofer.

n Place the subwoofer as close as possible to the front of the center.

n Turn the BASS-function to [BASS PLUS ON] to boost

the output from the subwoofer (see page 17).

n Adjust the volume of the subwoofer to suit your preference.

Change of initial settings

PCM-Down [Yes] connected an amplifier with an optical digital audio lead.

conversion [No] connected an amplifier with audio leads.

Dolby Digital [PCM] connected a n unit without a built-in Dolby Digital decoder.

[Bitstream] connected an unit with a built-in Dolby Digital decoder.

DTS Digital [Off] connected an unit without a built-in DTS decoder.

Surround [Bitstream] connected an unit with a built-in DTS decoder.

MPEG [PCM] connected an unit without a built-in MPEG decoder.

[Bitstream] connected an unit with a built-in MPEG decoder.

IMPORTANT

If the equipment you connected cannot decode the signal, the setting must be

changed to default settings. If not, signals the equipment cannot process will be

output by this unit, causing high levels of noise which can damage your hearing

and the speakers.

(not supplied)

Note:

n If you connect an amplifier with Dolby Pro Logic decoder you will also

need to connect center and surround speakers to enjoy surround sound.

n The Dolby Pro Logic decoder will not function correctly if

[A.SRD] (ADVANCED SURROUND) and [BASS PLUS] is on.

Turn [A.SRD] and [BASS PLUS] off.

RQTD0021-B

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic nv vhd1 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic nv vhd1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info