Bedienungsanleitung Panasonic NVDS28 (Seite 39 von 52) (Englisch)

627267

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ª To Display Date/Time Indication

To display Date/Time Indication, set the appropriate Date/

Time in [DATE/TIME] on the [DISPLAY SETUP] Sub-Menu.

(l 13)

You also can press the [DATE/TIME] Button of the Remote

Controller repeatedly to display or change the Date/Time

Indication.

ª To Change the Display Mode

By changing [DISPLAY] on the [DISPLAY SETUP] Sub-

Menu, you can change the Display Mode to All Function

Display [ALL], Partial Display [PARTIAL], and Minimum

Display [OFF].

~~~~~~~~~~~~~~~~~~~

Warning/Alarm Indications

If any one of the following indications lights up or flashes,

please check the condition of the Movie Camera.

≥Some Indications may not be displayed according to the

model.

3: Condensation has occurred. (l 43)

Y: The accidental erasure prevention

slider on the inserted Cassette is

open (that is, set to [SAVE].)

You are about to do audio dubbing

on the unrecorded (blank) portion of

the tape.

No Cassette is inserted. (l 11)

6: The Battery is low.Recharge it.

(l 10)

0: The button-type battery is low or not

in. (l 17)

:: The video heads are dirty. (l 44)

2END: The tape came to end during

recording.

REMOTE: Wrong Remote Controller Mode has

been selected. (l 9)

PRINTER ERROR: The Video Printer is not connected

correctly, or the Video Printer is not

functioning properly.

UNPLAYABLE TAPE

(OTHER FORMAT): You are attempting to play back a

tape section that has been recorded

with a different TV system.

UNABLE TO A. DUB

(LP RECORDED): Because the original recording was

done in LP Mode, audio dubbing

cannot be performed.

INCOMPATIBLE

TAPE: This Cassette is incompatible.

PLEASE RE-OPERATE

AFTER PUSHING

RESET BUTTON: Mechanism Irregular is detected.

Press the [RESET] Button (l 6).

This may solve the problem.

TO SERVICE: It is a malfunction.

CARD FULL: Card does not have sufficient

memory remaining.

NO CARD: Card is not inserted.

NO PICTURE: Card has no pictures recorded on it.

CARD ERROR: This Card is not compatible with this

Movie Camera.

COPY INHIBITED: Because the medium is protected by

a copy guard, images cannot be

recorded correctly.

~~~~~~~~~~~~~~~~~~~

Notes and Hints

ª Concerning the Power Supply

≥When the Movie Camera is used for a long time, the

Camera body becomes warm, but this is not a malfunction.

≥If the [CHARGE] Lamp does not light up although the

Battery is attached to AC Adaptor, detach the Battery and

reattach it.

≥Battery CGP-D110 and CGP-D105 cannot be charged with

this AC Adaptor.

ª Inserting/Removing the Cassette

≥In the case of using a previously recorded Cassette, you

can use the Camera Search Function to find the position

where you want to continue recording.

≥If a new Cassette is inserted, rewind to the beginning of the

tape before starting recording.

≥When inserting the cassette, make sure it faces in the right

direction and then push it in until it stops.

≥When opening or closing the Cassette Compartment, push

down the buckle of the Grip Belt so that it does not

obstruct the opening and closing of the Cassette

Compartment.

ª Alarm Sounds

When [BEEP SOUND] on the [OTHER FUNCTIONS] Sub-

Menu on the [CAMERA FUNCTIONS] Main-Menu is set to

[ON], confirmation/alarm beeps are issued as follows.

1 Beeps

≥When you start recording

≥When you switch the [OFF/ON] Switch from [OFF] to [ON]

2 Beeps

≥When you pause recording

10 Beeps

≥If you perform a wrong operation before or during recording

ª Recording

≥Before turning on the power, remove the Lens Cap. If the

Lens Cap is still attached when the power is turned [ON],

Automatic White Balance Adjustment (l 47) may not

function correctly.

ª Recording Check

≥For Recording Check, the Movie Camera mode (SP/LP)

must be the same as the mode used for the recording. If

different, playback images will be distorted.

ª Camera Search

≥In Camera Search Mode, images may contain mosaic-

pattern noise. This is a phenomenon that is characteristic

of digital video and not a malfunction.

≥If the recording speed modes (SP/LP) of previous

recording and new recording are different, playback images

may be distorted.

ª Photoshot

≥Photoshot Recording results in slightly inferior image

quality.

ª Progressive Photoshot Function

≥When you change to the Still Picture Mode, you will hear a

click. This is the sound of the iris closing and not an

indication of malfunction.

≥If you record still pictures in Progressive Photoshot Mode

when your Movie Camera is set to Programme AE (l 22),

the brightness of the images may change.

About [PROGRESSIVE] Setup

≥When the [æ] Indication is displayed, you can use the

Progressive Photoshot Function.

When [PROGRESSIVE] is [ON]:

You can use the Progressive Photoshot Function at any time.

In this case, however, the following functions are disabled.

≥Digital Effect Modes in [EFFECT1] (l 25)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVDS28 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVDS28

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info