Bedienungsanleitung Panasonic NVDS30 (Seite 49 von 60) (Englisch)

627270

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ª Audio Dubbing

≥The blank section of a tape cannot be dubbed.

≥Sounds sent through the DV Terminal cannot be

dubbed.

≥If a tape has a non-recorded portion when the tape

is dubbed, images and sounds may be disturbed

when this portion of the tape is played back.

≥If you set the tape counter back to 0 at the position

where you want to stop Audio Dubbing so as to

make it possible to use the Memory Stop Function

(l 56), Audio Dubbing is terminated automatically

when the tape reaches this position.

≥In the case of importing data recorded with Audio

Dubbing to a PC using the PC’s software

programme, only the original sound (ST1) may be

imported, depending on the software programme.

ª Recording the Contents of Other

Equipment

Analog-Digital Conversion

≥When the Movie Camera is connected with other

digital video equipment through its DV Terminal,

images recorded in analog form from other

external equipment can be output to the digital

video equipment through the DV Terminal.

ª Using the DV Cable for Recording

(Digital Dubbing)

≥Regardless of the setting, digital dubbing is carried

out automatically in the same audio recording

mode as that of the Cassette on the playback-side.

≥The images on the monitor of the recording side

may be disturbed, but it does not affect the

recorded images.

≥Even if Playback Digital Effects or Playback Digital

Zoom Function have been used, these effects are

not output from the DV Terminal.

≥Even if you use device equipped with DV

Terminals (such as IEEE1394), you may not be

able to perform Digital Dubbing in some cases.

≥Do not connect both an S-Video Cable or AV

Cable and a DV Cable.

ª Recording on a Card

≥The sound cannot be recorded.

≥The Shutter Effect cannot be used.

≥Pictures with wide-screen format signals cannot

be copied.

ª Playing Back a Card

≥If a blank (nothing recorded) Card is played, the

screen becomes white and the [NO PICTURE]

Indication appears.

≥If you attempt to play back a still picture recorded

in a different format or a picture whose image data

is defective, the [INCOMPATIBLE IMAGE]

Indication could appear as warning.

≥This Movie Camera can also play back the Mega-

Pixel still pictures recorded with the other

equipment. However it takes longer than usual

time.

≥When the size of the picture played back is over

[1280k960], the picture played back in small size

on the LCD Monitor.

ª Photo Title

≥The Photo Title Function and Digital Function

cannot be used simultaneously.

≥After recording, the Photo TItle setting is cleared

automatically.

ª Formatting a Card

If a Card becomes unreadable by the Movie

Camera, formatting it may make it reusable.

Formatting erases all the data recorded on a Card.

≥When the formatting is completed, the [NO

PICTURE] Indication appears.

≥It may not be possible to use the Card which was

formatted using this Movie Camera on another

unit. In this case, format the Card on the unit which

will be using the Card. Take steps to ensure that

valuable pictures are stored on the personal

computer, etc. as well before proceeding.

ª DPOF

≥Perform the DPOF Settings with your own Movie

Camera in use.

≥Verifying the DPOF Settings may take a little time.

Wait until the [ACCESS] Lamp goes out.

ª Using a Card in a Personal

Computer (NV-DS50 only)

≥To erase pictures that you recorded on the Card

by using the Movie Camera, be sure to erase them

on the Movie Camera, not on the computer.

≥Using the optional DV Editing Software (Motion DV

STUDIO) for Windows (VW-DTM20/21/22), variety

of visual effects can be added and title can be

created.

≥You may not be able to properly play back or

search the images on the Movie Camera after

editing the recorded data or changing the image

data on a personal computer.

≥The image data files recorded on the Card with

this Movie Camera conform to the DCF (Design

Rules for Camera Files Systems universal

standard) stipulated by JEITA (Japan Electronics

and Information Technology Industries

Association).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVDS30 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVDS30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info