Bedienungsanleitung Panasonic NVGS120GC (Seite 67 von 71) (Englisch)

627382

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Others

-128-

Compatibility with S-VHS or VHS Cassettes

Because this Movie Camera employs a digital

system for recording image and sound data, it is

not compatible with conventional S-VHS or VHS

video equipment that employs an analog

recording system.

The size and shape of the Cassettes are also

different.

Compatibility with Output Signals

Because AV signal output from the AV signal

output socket is analog (the same as

conventional video systems), this Movie Camera

can be connected with S-VHS or VHS video or a

TV for playback.

ª Focus

Auto Focus Adjustment

The Auto Focus System automatically moves

forward and backward the focusing lens inside

the Movie Camera to bring the subject into focus

so that the subject can be seen clearly.

However, the Auto Focus System does not

function properly for the following subjects or

under the following recording conditions.

Please use the Manual Focus Mode instead.

1) Recording a subject whose one end is

located closer to the Movie Camera and

the other end farther away from it

≥Because Auto Focus makes adjustments at

the centre of an image, it may be impossible

to focus on a subject that is located in both

foreground and background.

2) Recording a subject behind dirty or dusty

glass

≥Because the focus is on the dirty glass, the

subject behind the glass will not be focused.

3) Recording a subject in dark surroundings

≥Because the light information that comes

through the lens decreases considerably,

the Movie Camera cannot focus correctly.

4) Recording a subject that is surrounded by

objects with glossy surfaces or by highly

reflective objects

≥Because the Movie Camera focuses on the

objects with glossy surfaces or on highly

reflective objects, the recording subject may

become blurry.

5) Recording a fast-moving subject

≥Because the focus lens-inside moves

mechanically, it cannot keep up with the

fast-moving subject.

6) Recording a subject with little contrast

≥Because the Movie Camera achieves focus

based upon the vertical lines of an image, a

subject with little contrast, such as a white

wall, may become blurry.

ª Time Code

Time Code signals are data that indicate time

measured in hours, minutes, seconds, and

frames (25 frames per second). If this data is

included in a recording, an address is assigned to

each image on the tape.

≥The Time Code is automatically recorded as a

part of the sub-code at each recording.

≥When a new (previously unrecorded) Cassette

is inserted, the Time Code automatically starts

from zero. If a recorded Cassette is inserted,

the Time Code picks up from the point where

the last scene was recorded. (In this case, when

the Cassette is inserted, the zero display

[0h00m00s00f] may appear, but the Time Code

starts from the previous value.)

≥The Time Code cannot be reset to zero.

≥Unless the Time Code is continuously recorded

from the beginning of a tape, accurate editing

may not be possible. To ensure that the Time

Code will be recorded with no breaks, we

recommend the use of the Blank Search

Function (

-81-) before recording a new scene.

ª Memory Stop Function

The Memory Stop Function is useful for the

following operations.

Rewinding or fast-forwarding a tape to a

desired position

1 Set [DISPLAY] >> [C.DISPLAY] >>

[MEMORY].

2 Reset the Tape Counter to zero at the tape

position from which you want to play it

back later. (

-66-, -75-)

3 Start playback or recording.

4 After playback or recording has finished:

Set the Movie Camera to Tape Playback

Mode.

5 Rewind the tape.

≥The tape automatically stops approximately

at the position where the counter was set to

zero.

Stopping editing automatically during audio

dubbing

1 Set [DISPLAY] >> [C.DISPLAY] >>

[MEMORY].

2 Reset the Tape Counter to zero at the

position where you want to stop editing.

3 Play back the still picture where you want to

start audio dubbing.

4 Start audio dubbing. (-105-)

≥Audio dubbing automatically stops at the

position where the counter was set to zero.

120.200GC_eng.book 128 ページ２００４年２月２５日　水曜日　午後５時３８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS120GC Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info