Bedienungsanleitung Panasonic NVGS150EB (Seite 12 von 64) (Englisch)

627387

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Before using

VQT0N43

the LCD monitor frontward to record yourself,

using the 0 lux night view function, etc.

≥When you use this camera with the LCD

monitor lit up by pressing the [POWER LCD]

button.

≥When you use accessories fitted on the

camera’s smart accessory shoe such as the

stereo zoom microphone and video DC light,

etc.

≥The batteries heat up after use or charging. The

main unit of the movie camera being used will

also heat up. This is normal.

≥Along with the reduction of the battery capacity,

the display will change: r # s #

t # u # v. If the battery

discharges, then u (v) will flash.

Inserting/removing a cassette

1 Slide the [OPEN/EJECT] lever and open the

cassette cover.

≥When the cover is fully opened, the cassette

holder will come out.

2 After the cassette holder is opened, insert/

remove the cassette.

≥When inserting a cassette, orient it as shown

in the figure, and then securely insert it as far

as it goes.

≥When removing, pull it straight out.

3 Push the [PUSH] mark 1 in order to close

the cassette holder.

4 Only after the cassette holder is completely

housed, close the cassette cover.

≥After using, make sure to rewind the cassette

completely, remove it, and put it in a case. Store

the case in an upright position. (

-58-)

≥When condensation is formed on the lens or the

main unit of the movie camera, even if no

condensation alarm is indicated, condensation

may have formed on the heads or the cassette

tape. Do not open the cassette cover. (

-56-)

When the cassette holder does not

come out

≥Close the cassette cover completely, and then

open it again completely.

≥Check if the battery has run down.

When the cassette holder cannot be

housed

≥Set the [OFF/ON] switch to [OFF], then to [ON]

again.

≥Check if the battery has run down.

Inserting/removing the cassette

≥When the cassette holder is in action, do not

touch anything except the [PUSH] mark.

≥When inserting a previously recorded cassette,

use the blank search function to find the position

where you want to continue recording. If you

overwrite-record on a previously recorded

cassette, be sure to find the position where you

continue recording.

≥Close the cassette cover tightly.

≥When closing the cassette cover, do not get

anything, such as a cable, caught in the cover.

Accidental erasure prevention

If the accidental erasure prevention slider 1 of a

cassette is opened (slide in the direction of the

[SAVE] arrow), the cassette cannot be recorded.

When recording, close the accidental erasure

prevention slider of the cassette (slide in the

direction of the [REC] arrow).

OPEN

EJEC

PUSH

R E C

SAVE

GS150_140EB.book 12 ページ２００４年１１月２７日　土曜日　午後４時５５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS150EB Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVGS150EB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info