Bedienungsanleitung Panasonic NVGS150EB (Seite 57 von 64) (Englisch)

627387

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Others

VQT0N43

and playback are not properly performed.

Clean the heads with the digital video head

cleaner.

≥Insert the head cleaner into the movie camera,

set it to the Tape Playback Mode, and play it

back for about 10 to 20 seconds. (If you do not

stop the playback, it automatically stops about

30 seconds later.)

≥We recommend cleaning the heads periodically.

If the heads become dirty, “NEED HEAD

CLEANING” appears during recording. During

playback, moreover, the following symptoms

appear.

≥Mosaic-like noise appears partially or the

sound is interrupted.

≥Black or blue mosaic-like horizontal stripes

appear.

When normal playback cannot be performed

even after the head cleaning

One possible cause is that normal recording

could not be performed because the heads were

dirty at the time of recording. Clean the heads,

and perform recording and playback again. If

normal playback can be performed, the heads are

clean. Before an important recording, be sure to

conduct a test recording to make sure that normal

recording can be performed.

≥If the heads become dirty soon after cleaning,

the problem may be attributable to the tape. If

so, try another cassette.

≥During playback, the picture or sound may be

interrupted momentarily, but this is not a

malfunction of the movie camera. (One possible

cause is that the playback is interrupted by dirt

or dust that momentarily adheres to the heads.)

About the movie camera

≥When the movie camera is used for a long time,

the camera body becomes warm, but this is not

a malfunction.

Keep the movie camera away from

magnetized equipment such as a cellular

phones, microwave ovens, TVs, and video

game equipment.

≥If you use the movie camera on or near a TV,

images or sounds may be disturbed due to

electromagnetic wave radiation.

≥Recordings on the tape may be damaged, or

images may be distorted, by strong magnetic

fields created by speakers or large motors.

≥Electromagnetic wave radiation generated by

digital circuits including microprocessor may

adversely affect the movie camera, causing the

disturbance of images and sounds.

≥If the movie camera is affected by such

equipment and does not function properly, turn

off the movie camera power and detach the

battery or AC adaptor. Then, connect the

battery or AC adaptor again and turn on the

movie camera power.

Do not use your movie camera near radio

transmitters or high-voltage cables.

≥If you record pictures near radio transmitters or

high-voltage cables, recorded images or sounds

may be adversely affected.

Do not spray insecticides or volatile

chemicals onto the movie camera.

≥If the movie camera is sprayed with such

chemicals, the camera body may become

deformed and the surface finish may peel off.

≥Do not keep rubber or plastic products in

contact with the movie camera for a long time.

When you use your movie camera in a sandy

or dusty place such as on a beach, do not let

sand or fine dust get into the body and

terminals of the movie camera. Also, protect

the movie camera from getting wet.

≥Sand or dust may damage the movie camera or

cassette. (Care should be taken when inserting

and removing a cassette.)

≥If sea water splashes onto the movie camera,

wet a soft cloth with tap water, wring it well, and

use it to wipe the camera body carefully. Then,

wipe it again thoroughly with a soft dry cloth.

While carrying the movie camera, do not drop

or bump it.

≥A strong impact on the movie camera may

break its housing, causing it to malfunction.

Do not use benzine, paint thinner or alcohol

for cleaning the movie camera.

≥Before cleaning, detach the battery or pull out

the AC mains lead from the AC mains socket.

≥The camera body may be discoloured and the

surface finish may peel off.

≥Wipe the movie camera with a soft dry cloth to

remove dust and fingerprints. To remove

stubborn stains, wring well a cloth that is soaked

in a neutral detergent diluted with water and

wipe the movie camera with it. Afterwards, wipe

it with a dry cloth.

≥When you use a chemical dust cloth, follow the

instructions.

Do not use this movie camera for surveillance

purposes or other business use.

≥If you use the movie camera for a long time, the

internal temperature increases and,

consequently, this may cause malfunction.

≥This movie camera is not intended for business

use.

About the flash

≥Since there are high-voltage sections inside the

flash, do not disassemble it to avoid electric

shock.

GS150_140EB.book 57 ページ２００４年１１月２７日　土曜日　午後４時５５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS150EB Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVGS150EB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info