Bedienungsanleitung Panasonic NVGS180GN (Seite 39 von 60) (Englisch)

627395

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Edit mode

VQT0T93

≥For more information, refer to the operating

instructions for your TV set and recorder.

≥When you do not need functional indications or

date and time indications, press the

[EXT DISPLAY] button on the remote control for

no indication. (When you connect the movie

camera and a recorder with the DV cable, these

indications may not appear.)

When neither image nor sound from

the movie camera is output to the TV

set

≥Check that the plugs are inserted as far as they

go.

≥Check the connected terminal.

≥When no image is presented on the TV even if

set [BASIC] >> [AV JACK] >> [OUT/Ë], set to

[OUT]. (

-45-)

Using the DV Cable for Recording

(Digital Dubbing)

By connecting other digital video equipment with

DV terminal and the movie camera by using the

DV cable VW-CD1E (optional) 1,

high-image-quality dubbing can be done in digital

format.

≥Set to Tape Playback Mode. (Player/

recorder)

1 Connect the movie camera and digital video

equipment with the DV cable.

2 Set [ADVANCE] >> [REC STDBY] >> [YES].

(Recorder)

≥You do not have to follow this step when the

remote control is used in the digital dubbing.

3 Start playback. (Player)

4 Start recording. (Recorder)

Move the joystick up to select [¥/;] icon.

Or, while pressing the [¥REC] button on the

remote control, press the [PLAY 1] button.

5 Move the joystick up to select the [¥/;]

icon again or press the [;] button on the

remote control to stop recording.

(Recorder)

6 Stop playback. (Player)

To cancel the standby for recording

When the camera is standby for recording, move

the joystick down and select the [∫] icon.

≥Do not plug or unplug the DV cable during

dubbing, or the dubbing may not be completed

properly.

≥If a picture (bilingual video, etc.) containing main

sound and sub sound has been dubbed, select

the desired sound by [SETUP] >> [AUDIO OUT]

on playback.

≥Even if you use a device equipped with DV

terminals such as IEEE1394, you may not be

able to perform digital dubbing in some cases.

For more information, see the instructions for

equipment connected.

≥Regardless of the menu settings on the

recorder, digital dubbing is carried out in the

same mode as the [AUDIO REC] mode of the

playback tape.

≥The images on the recorder monitor may be

disturbed, but it does not affect the recorded

images.

≥If a picture containing a copyright protection

signal (copy guard) is recorded by the movie

camera, the picture is distorted by mosaic-like

patterns at playback.

≥Disconnect the USB cable since input signals

from the external input terminal cannot be

recorded while it is connected with the USB

cable.

≥When wide images are input, the display such

as the menu screen or the operation icon is

expanded horizontally.

≥While pictures are input from the DV terminal,

the operation icon blinks on instead of

appearing from the side of the screen when you

press the centre of the joystick.

VQT0T93ENG.book 39 ページ２００５年１１月２８日　月曜日　午後９時６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS180GN Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info