Bedienungsanleitung Panasonic NVGS250GN (Seite 24 von 64) (Englisch)

627416

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Record mode

VQT0N73

Quick start

This camera will be put into standby in approx.

1.7 seconds after the power is turned on.

≥This is only activated in the following cases.

≥A tape or a card is inserted, while the Tape

Recording Mode is set.

≥A card is inserted, while the Card Recording

Mode is set.

1 Press the [QUICK START] button.

≥The quick start recording lamp lights up.

(Press the button again to cancel it.)

2 Set the [OFF/ON] switch to [OFF].

≥The quick start is now ready.

3 Set the [OFF/ON] switch to [ON].

≥This camera will be put into a recording

pause in approx. 1.7 seconds after it is turned

on.

To cancel the quick start when the

power is [OFF]

Press and hold the [QUICK START] button for

approx. 2 seconds. The lamp will go off and the

camera will be completely turned off.

≥If the standby continues for approx. 30 minutes,

then the lamp will go off and the camera will be

completely turned off.

≥When you rotate the mode dial or remove the

battery, the quick start recording lamp is turned

off and the quick start mode is cancelled. If the

movie camera is turned on and the Tape/Card

Recording Mode is set though, the lamp turns

on and the quick start mode is restored.

≥When the camera is quick-started with the white

balance on automatic, it may take some time

until the white balance is adjusted if the scene

being recorded has a light source different from

the scene last recorded. (When the colour night

view function is used, however, the white

balance of the scene last recorded is retained.)

≥The zoom magnification may differ from when it

is in the quick start standby mode and when the

recording starts.

≥Since about half the power of normal recording

is used in quick start standby, using quick start

reduces the recordable time.

Backlight compensation function

This protects a backlit subject from being

darkened.

≥Set to Tape/Card Recording Mode.

1 Press the joystick until the icon 1 appears.

2 Move the joystick right to select the

backlight compensation icon [ ].

≥The image on the screen will become

brighter.

To return to normal recording

Select the [ ] icon again.

≥If you operate the [OFF/ON] switch or the mode

dial, the backlight compensation is cancelled.

Night view functions

This function allows you to record colour subjects

in dark locations to stand out against the

background.

Attach the camera to a tripod, and you can record

images free from vibration.

≥Only manual focusing can be used.

≥Recorded scene is seen as if frames were

missed.

Colour night view function

You can record dark locations brightly in colour.

0 Lux night view function

You can record completely dark locations with the

light of the LCD monitor.

≥Set to Tape Recording Mode.

1 Press the joystick until the icon 1 appears.

2 Move the joystick up to select the night

view icon [ ].

≥Each upward press switches the modes.

OFF # Colour night view function # 0 Lux

night view function # OFF

START

QUICK

GS250GN.book 24 ページ２００５年１月２６日　水曜日　午後１２時１７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS250GN Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info