Bedienungsanleitung Panasonic NVGS27GN (Seite 36 von 44) (Englisch)

627422

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Others

LSQT1008

Before requesting repair

(Problems and solutions)

Power/Body

1: The movie camera power cannot be turned

on.

• Is the battery fully charged? Use a fully

charged battery.

• The battery protection circuit may have

operated. Attach the battery to the AC adaptor

for 5 to 10 seconds. If the movie camera still

cannot be used, the battery is faulty.

• Is the LCD monitor open or the viewfinder

extend?

2: The movie camera power is turned off

automatically.

• If you set [POWER SAVE] to [5 MINUTES] and

do not operate the movie camera for about

5 continuous minutes, the power is

automatically turned off for tape protection and

power conservation. To resume recording, turn

the [OFF/ON] switch to [OFF]. Then turn it to

[ON] again. (

-32-) Also, if you set

[POWER SAVE] to [OFF], the power does not

automatically turn off.

3: The movie camera power does not stay on

long enough.

• Is the battery low? If the remaining battery

power indication is flashing or the message

“LOW BATTERY” is displayed, the battery has

run down. Charge the battery or attach a fully

charged battery. (

-7-)

• Has condensation occurred? When you carry

the movie camera from a cold place into a

warm place, condensation may occur inside it.

If so, the power is turned off automatically,

disabling all operations except for taking

cassettes out. Wait until the condensation

indication disappears. (

-38-)

4: Battery runs down quickly.

• Is the battery fully charged? Charge it with the

AC adaptor. (

-7-)

• Are you using the battery in an extremely cold

place? The battery is affected by ambient

temperature. In cold places, the operating time

of the battery becomes shorter.

• Has the battery worn out? The battery has a

limited life. If the operating time is still too short

even after the battery is fully charged,

depending on the usage, the battery has worn

out and can no longer be used.

5: The movie camera cannot be operated

though powered up.

The movie camera does not operate

normally.

• The movie camera cannot be operated unless

you open the LCD monitor or extend the

viewfinder.

• Remove the cassette and then press the

[RESET] button. (

-38-) If normal conditions are

not restored yet, turn off the power. Then,

about 1 minute later, turn on the power again.

6: The cassette cannot be removed.

• Does the status indicator comes on when

opening the cassette cover? (

-12-) Make sure

that the battery and the AC adaptor are

properly connected. (

-7-)

• Is the battery in use discharged? Charge the

battery and remove the cassette.

• Close the cassette cover completely, and fully

open it again. (

-12-)

7: No operation other than cassette removal

can be performed.

• Has condensation occurred? Wait until the

condensation indication disappears. (

-38-)

Recording

1: Recording does not start although power is

supplied to the movie camera and the

cassette is correctly inserted.

• Is the accidental erasure prevention slider on

the cassette open? If it is open (set to [SAVE]),

recording cannot be performed. (

-12-)

• Is the tape wound to the end? Insert a new

cassette.

• Is the recording mode set? When in the

playback mode, recording cannot be

performed. (

-17-)

• Has condensation occurred? No operation

other than cassette removal can be performed

when condensation occurs. Wait until the

condensation indication disappears. (

-38-)

• Is the cassette cover open? If the cover is

open, the movie camera may not operate

normally. Close the cassette cover. (

-12-)

2: The screen has changed suddenly.

• Has the demonstration started? In the Tape

Recording mode, if you set [DEMO MODE] >>

[ON] without inserting a cassette, the

demonstration starts. For normal use, set this

function to [OFF]. (

-33-)

3: A cassette cannot be inserted.

• Has condensation occurred? Wait until the

condensation indication disappears.

LSQT1008ENG.book 36 ページ２００６年１月１８日　水曜日　午前１０時４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS27GN Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVGS27GN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info