Bedienungsanleitung Panasonic NVGS400GC (Seite 65 von 71) (Englisch)

627444

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Others

126

Other Recording

1: Auto Focus Function does not work.

• Is Manual Focus Mode selected? If Auto Focus

Mode is selected, focus is automatically

adjusted. (

-90-)

• There are some recording subjects and

recording surroundings for which the Auto

Focus Function does not operate correctly. In

this case, use the Manual Focus Mode to

adjust the focus. (

-127-)

Editing

1: Audio dubbing cannot be performed.

• Is the accidental erasure prevention slider on

the Cassette open? If it is open (set to [SAVE]),

recording cannot be performed. (

-71-)

• Are you attempting to edit a tape portion that

was recorded in LP Mode? LP Mode does not

allow audio dubbing to operate. (

-78-)

Indications

1: The Time Code becomes inaccurate.

0 The Time Code Indication counter may not be

constant in the reverse direction in Slow Motion

Playback Mode, but this is not a malfunction.

2: The Remaining Tape Time Indication does

not match the actual remaining tape time.

• If scenes of less than 15 seconds are

continuously recorded, the remaining tape time

cannot be displayed correctly.

• In some cases, the Remaining Tape Time

Indication may show remaining tape time that

is 2 to 3 minutes shorter than the actual

remaining tape time.

Playback (Pictures)

1: Pictures cannot be played back even when

the [1] Button is pressed.

0 Is the Mode Dial set to Playback Mode? If not,

the playback function cannot be used. (

-96-)

2: Mosaic-pattern noise appears on images

during Cue, Review or Slow Motion

Playback.

• This phenomenon is characteristic of digital

video systems. It is not a malfunction.

3: Although the Movie Camera is correctly

connected to a TV, playback images cannot

be seen.

• Have you selected “Video Input” on the TV?

Please read the operating instructions of your

TV and select the channel that matches the

input sockets used for the connection.

• Depending on your TV, nothing may be shown

even if you correctly connect the Movie

Camera with your TV. In this case, set

[AV JACK] to [OUT].

4: Playback picture is not clear.

• Are the heads of the Movie Camera dirty? If the

heads are dirty, playback image cannot be

clear. (

-123-)

5: Playing back or recording do not function,

the screen has frozen or the indication has

disappeared.

• Turn the Movie Camera off. If the Movie

Camera is not turned off after operating the

[OFF/ON] switch, press the [RESET] Button

(

-66-) first. And detach the Battery or AC

Adaptor and then reattach it.

Playback (Sound)

1: Sound is not played back from the built-in

speaker of the Movie Camera or the

headphones.

0 Is the volume too low? During playback, push

the [sVOL/JOGr] Lever to display the

[VOLUME] Indication and adjust the volume.

(

-96-)

2: Different sounds are reproduced at the

same time.

• [12bit AUDIO] on the [PLAYBACK] Sub-Menu

of the [TAPE PLAYBACK MENU] has been set

to [MIX]. As a result, the original sound and

sound that was recorded by audio dubbing are

played back together. It is possible to

reproduce the sounds separately. (

-105-)

3: The original sound was erased when audio

dubbing was performed.

• If you perform audio dubbing on a recording

made in [16bit] Mode, the original sound will be

erased. If you wish to preserve the original

sound, be sure to select [12bit] Mode at the

time of recording.

4: Sounds cannot be played back.

• Although a Cassette with no audio dubbing is

being played, is [12bit AUDIO] on the

[PLAYBACK] Sub-Menu of the

[TAPE PLAYBACK MENU] set to [ST2]? To

play back a Cassette with no audio dubbing,

[12bit AUDIO] must be set to [ST1]. (

-105-)

• Is the Variable Speed Search Function

working? Press the [1] Button to cancel the

Variable Speed Search Function. (

-97-)

Card

1: Recorded pictures are not clear.

0 Is [PICT QUALITY] on the [CARD] Sub-Menu

set to [NORMAL] or [ECONOMY]? If recording

is done with it set to [NORMAL] or

[ECONOMY], images with fine details may

include a mosaic-like pattern. Set

[PICT QUALITY] to [FINE]. (

-82-)

400GC.book 126 ページ２００４年６月３日　木曜日　午後８時３３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS400GC Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info