Bedienungsanleitung Panasonic NVGS50B (Seite 64 von 76) (Englisch)

627449

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Others

-64-

Card

≥When the Card is being read, do not remove the

Card, turn off the power, or subject it to vibration

or impact.

≥Do not leave the Card in places where there is

high temperature or direct sunlight, or where

electromagnetic waves or static electricity are

easily generated.

≥Do not bend or drop the Card. The Card or the

recorded content may be damaged.

≥After use, be sure to remove the Card from the

Movie Camera.

≥After usage, store the supplied SD Memory

Card in the enclosed bag.

≥Do not touch the terminals on the back of the

Card with your fingers. Do not allow dirt, dust or

water to enter it.

ª LCD Monitor/Viewfinder/Lens Hood

LCD Monitor

≥In a place with drastic temperature changes,

condensation may form on the LCD Monitor.

Wipe it with soft dry cloth.

≥If your Movie Camera is extremely cold when

you turn its power on, the image on the LCD

Monitor is slightly darker than usual at first.

However, as the internal temperature increases,

it goes back to the normal brightness.

Viewfinder

≥Do not direct the Viewfinder or Lens to the sun.

Internal components may be seriously

damaged.

≥When the Movie Camera is used with a large

capacity Battery (CGA-DU21; optional)

attached to it, it is not practical to look in the

Viewfinder from behind the Battery.

Extremely high precision technology is

employed to produce the LCD Monitor

screen featuring a total of approximately

113,000 pixels. The result is more than

99.99% effective pixels with a mere 0.01% of

the pixels inactive or always lit. However,

this is not a malfunction and does not affect

the recorded picture.

Extremely high precision technology is

employed to produce the Viewfinder screen

featuring a total of approximately 67,500

pixels for NV-GS40 and approximately

113,000 pixels for NV-GS50. The result is

more than 99.99% effective pixels with a

mere 0.01% of the pixels inactive or always

lit. However, this is not a malfunction and

does not affect the recorded picture.

Lens Hood

≥Do not attach other conversion lenses in front of

the Lens Hood; there is no mount to be used for

the attachment.

≥When you wish to attach the Tele Conversion

Lens (VW-LT2714N2E; optional), Wide

Conversion Lens (VW-LW2707N2E; optional),

MC Protector (VW-LMC27E; optional), or ND

Filter (VW-LND27E; optional), first of all, turn

the Lens Hood counterclockwise. If the MC

Protector or ND Filter is used, the Lens Hood

can be mounted on the filter.

≥If you push the [W/T] Lever toward [W] during

recording with the filter and conversion lens

attached together to the Movie Camera,

4 corners of the image may become dark

(vignetting). For details, please refer to the

operating instructions of your accessories.

≥Be sure to keep the Lens Hood attached to the

Movie Camera so as to shut out unnecessary

light.

Before Requesting Repair (Problems

and Solutions)

Power

1: The Movie Camera power cannot be turned

on.

• Is the power source connected correctly? (

-9-)

2: The Movie Camera power is turned off

automatically.

• If you leave the Movie Camera in Recording

Pause Mode for more than 6 minutes, the

power is turned off automatically to protect the

tape or a Card and to save the Battery power.

(

-18-, -38-)

3: The Movie Camera power does not stay on

long enough.

• Is the Battery low? Charge the Battery or

attach a fully charged Battery. (

-10-)

• Has condensation occurred? Wait until the

Condensation Indication disappears. (

-62-)

Battery

1: Battery runs down quickly.

• Is the Battery fully charged? Charge it with the

AC Adaptor. (

-10-)

• Are you using the Battery in an extremely cold

place? In cold places, the operating time of the

Battery becomes shorter. (

-63-)

• Has the Battery worn out? If the operating time

is still too short even after the Battery is fully

charged, the Battery has worn out.

2: The Battery cannot be charged.

• If the DC Input Lead is connected to the AC

Adaptor, charging cannot be performed.

Disconnect the DC Input Lead.

ENGText.fm 64 ページ２００３年１月２１日　火曜日　午後１時２５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS50B Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info