Bedienungsanleitung Panasonic NVGS8EG (Seite 53 von 62) (Holländisch)

627462

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Others

-53-

≥If the Movie Camera is affected by magnetically

charged equipment and does not function

properly, turn off the Movie Camera power and

detach the Battery or AC Adaptor and then

connect the Battery or AC Adaptor again.

Thereafter, turn on the Movie Camera power.

Do not use your Movie Camera near radio

transmitters or high-voltage cables.

≥If you record pictures near radio transmitters or

high-voltage cables, recorded images or sounds

may be adversely affected.

Do not use this Movie Camera for surveillance

purposes or other business use.

≥If you use the Movie Camera for a long period of

time, the internal temperature increases and,

consequently, this may cause malfunction.

≥This Movie Camera is not intended for business

use.

When you use your Movie Camera on a beach

or similar place, do not let sand or fine dust

get into the Movie Camera.

≥Sand or dust may damage the Movie Camera or

Cassette. (Care should be taken when inserting

and removing the Cassette.)

Do not spray insecticides or volatile

chemicals onto the Movie Camera.

≥If the Movie Camera is sprayed with such

chemicals, the camera body may be deformed

and the surface finish may peel off.

≥Do not keep rubber or plastic products in

contact with the Movie Camera for a long period

of time.

Do not use benzine, thinner or alcohol for

cleaning the Movie Camera.

≥The camera body may be deformed and the

surface finish may peel off.

≥Before cleaning, detach the Battery or pull out

the AC Mains Lead from the AC mains socket.

≥Wipe the Movie Camera with a soft dry cloth. To

remove stubborn stains, wipe with a cloth that is

soaked in a detergent diluted with water and

afterwards finish wiping with a dry cloth.

≥For storing or transporting the Movie Camera,

place it in a bag or case lined with soft pads so

as to prevent the coating on the camera body

from being worn.

After use, be sure to take the Cassette out and

detach the Battery from the Movie Camera or

pull out the AC Mains Lead from AC mains

socket.

≥If the Cassette is left in the Movie Camera, the

tape sags and deteriorates.

≥If the Battery is left on the Movie Camera for a

long time, the voltage drops excessively, and

the Battery will not function even after it is

recharged.

ª About AC Adaptor

≥If the temperature of the Battery is extremely

high or extremely low, the [CHARGE] Lamp

may continue flashing, and the Battery may not

be charged. After the temperature of the Battery

has decreased or increased sufficiently,

charging starts automatically. If the [CHARGE]

Lamp continues to flash even after the Battery

temperature has decreased or increased

sufficiently, the Battery or AC Adaptor may be

faulty. In this case, please contact a dealer.

≥If the Battery is warm, charging takes a longer

time than normal.

≥If you use the AC Adaptor near a radio, radio

reception may be disturbed. Keep the AC

Adaptor 1 metre or more away from radio.

≥When using the AC Adaptor, it may generate

whirring sounds. However, this is normal.

≥After use, be sure to pull out the AC Mains Lead

from the AC mains socket. (If they are left

connected, a minute amount of current is

consumed.)

≥Keep the electrodes of the AC Adaptor and

Battery always clean.

ª Condensation

If you turn the Movie Camera on when

condensation occurs on the head or the tape,

Condensation Indication [3DEW] (yellow or red)

blinks on the Viewfinder or the LCD monitor and

the messages [DEW DETECT] or [EJECT TAPE]

(only when the tape is inserted) appear. In this

case, follow the procedure below.

Blink in yellow:

Dews are slightly adhering on the head or the

tape.

Blink in red:

Dews are adhere on the head or the tape.

1 Remove the tape if it is inserted.

≥It takes about 20 seconds to open the

Cassette Holder. This is not a malfunction.

2 Leave the Movie Camera with the Cassette

Compartment Cover closed to cool or warm

it to the ambient temperature.

When [3DEW] blinks in yellow

≥You cannot use the Tape Recording/

Playback Mode. Leave the Movie Camera

for about 30 minutes.

≥However, you can use the Card Recording

Mode or Picture Playback Mode when the

cassette is not inserted.

When [3DEW] blinks in red

≥The Power Indicator Lamp blinks for about 1

minute and then the Movie Camera

automatically turns off. Leave it for about 2

to 3 hours.

15EGE-ENG.book 53 ページ２００４年２月９日　月曜日　午前１１時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVGS8EG Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVGS8EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info