Bedienungsanleitung Panasonic NVMD9000EN (Seite 33 von 40) (Englisch)

627468

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Others

Using the DV Cable for Recording

(Digital Dubbing)

≥Regardless of the setting, digital dubbing is

carried out automatically in the same audio

recording mode as that of the Cassette on the

playback-side.

≥The images on the monitor of the recording

side may be disturbed, but it does not affect

the recorded images.

≥Even if Playback Digital Effects or Playback

Zoom have been used, these effects are not

output from the DV Terminal.

≥Even if you use device equipped with DV

Terminals (such as IEEE1394), you may not

be able to perform Digital Dubbing in some

cases.

≥Date or other information to be displayed

cannot be displayed if the software of the

connected equipment does not support the

display function.

Cautions for Use

After Use

Take out the Cassette. (

-43-

)

Set the [OFF/ON] Switch to [OFF].

Detach the power supply and retract the

Viewfinder or the LCD Monitor. (

-42-

-44-

)

To protect the Lens, attach the supplied

Lens Cap.

Cautions for Use

When you use your Movie Camera in a rainy

or snowy day or on a beach, make sure that

no water enters inside the Movie Camera.

≥Water may cause the Movie Camera or

Cassette to malfunction. (Irreparable failure

may occur.)

≥If sea water splashes onto the Movie Camera,

wet a soft cloth with tap water, wring it well,

and use it to wipe the camera body carefully.

Then, wipe it again thoroughly with a soft dry

cloth.

Keep the Movie Camera away from

magnetized equipment (such as a

microwave oven, TV, video game equipment,

etc.).

≥If you use the Movie Camera on or near a TV,

images or sounds may be disturbed due to

electromagnetic wave radiation.

≥Do not use near a cell phone because doing

so may cause noise to adversely affect the

picture and sound.

≥By strong magnetic fields created by speakers

or large motors, recording on the tape may be

damaged, or images may be distorted.

≥Electromagnetic wave radiation generated by

a microprocessor may adversely affect the

Movie Camera, causing the disturbance of

images and sounds.

≥If the Movie Camera is affected by

magnetically charged equipment and does not

function properly, turn off the Movie Camera

power and detach the Battery or AC Adaptor

and then connect the Battery or AC Adaptor

again. Thereafter, turn on the Movie Camera

power.

Do not use your Movie Camera near radio

transmitters or high-voltage lines.

≥If you record pictures near radio transmitters

or high-voltage lines, recorded images or

sounds may be adversely affected.

Do not use this Movie Camera for

surveillance purpose or other business use.

≥If you use the Movie Camera for a long period

of time, the internal temperature increases

and, consequently, this may cause

malfunction.

≥This Movie Camera is not intended for

business use.

When you use your Movie Camera on a

beach or similar place, do not let sand or fine

dust get into the Movie Camera.

≥Sand or dust may damage the Movie Camera

or Cassette. (Care should be taken when

inserting and removing the Cassette.)

Do not spray insecticides or volatile

chemicals onto the Movie Camera.

≥If the Movie Camera is sprayed with such

chemicals, the camera body may be deformed

and the surface finish may peel off.

≥Do not keep rubber or plastic product in

contact with the Movie Camera for a long

period of time.

Do not use benzine, thinner or alcohol for

cleaning the Movie Camera.

≥The camera body may be deformed and the

surface finish may peel off.

≥Before cleaning, detach the Battery or pull out

the AC Mains Lead from the AC mains socket.

≥Wipe the Movie Camera with a soft dry cloth.

To remove stubborn stains, wipe with a cloth

that is soaked in a detergent diluted with water

and afterward finish wiping with a dry cloth.

≥For storing or transporting the Movie Camera,

place it in a bag or case lined with soft pads so

as to prevent the coating on the camera body

from being worn.

After use, be sure to take the Cassette out

and detach the Battery from the Movie

Camera or pull out the AC Mains Lead from

AC mains socket.

≥If the Cassette is left in the Movie Camera, the

tape sags and deteriorates.

≥If the Battery is left on the Movie Camera for a

long time, the voltage drops excessively, and

the Battery will not function even after it is

recharged.

About AC Adaptor

≥If the temperature of the Battery is extremely

high or extremely low, the [CHARGE] Lamp

may continue flashing, and the Battery may

not be charged. After the temperature of the

Battery has decreased or increased

sufficiently, charging starts automatically. If the

[CHARGE] Lamp continues to flash even after

the Battery temperature has decreased or

increased sufficiently, the Battery or AC

Adaptor may be faulty. In this case, please

contact a dealer.

≥If the Battery is warm, charging takes a longer

time than normal.

≥If you use the AC Adaptor near a radio, radio

reception may be disturbed. Keep the AC

Adaptor 1 metre or more away from radio.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVMD9000EN Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info