Bedienungsanleitung Panasonic NVMX2B (Seite 47 von 60) (Englisch)

627473

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Notes and Hints

Concerning the Power Supply

≥When the Movie Camera is used for a long time, the

Camera body becomes warm, but this is not a malfunction.

≥If the [CHARGE] Lamp does not light up although the

Battery is attached to AC Adaptor, detach the Battery and

reattach it.

≥Battery CGP-D110 and CGP-D105 cannot be charged with

this AC Adaptor.

Inserting/Removing the Cassette

≥In the case of using a previously recorded Cassette, you

can use the Camera Search Function to find the position

where you want to continue recording.

≥If a new Cassette is inserted, rewind to the beginning of the

tape before starting recording.

≥When inserting the cassette, make sure it faces in the right

direction and then push it in until it stops.

≥When opening or closing the Cassette Compartment, push

down the buckle of the Grip Belt so that it does not

obstruct the opening and closing of the Cassette

Compartment.

Alarm Sounds

When [BEEP SOUND] on the [OTHER FUNCTIONS]

Sub-Menu on the [CAMERA FUNCTIONS] Main-Menu is set

to [ON], confirmation/alarm beeps are issued as follows.

1 Beep

≥When you start recording

≥When you switch the [OFF/ON/MODE] Switch from [OFF]

to [ON]

2 Beeps

≥When you pause recording

10 Beeps

≥If you perform a wrong operation before or during recording

Recording

≥Before turning on the power, remove the Lens Cap. If the

Lens Cap is still attached when the power is turned [ON],

Automatic White Balance Adjustment

(

22)

may not

function correctly.

Recording Check

≥For Recording Check, the recording speed mode (SP/LP)

must be the same as the mode used for the recording. If

different, playback images will be distorted.

Camera Search

≥In Camera Search Mode, images may contain

mosaic-pattern noise. This is a phenomenon that is

characteristic of digital video and not a malfunction.

≥If the recording speed modes (SP/LP) of previous

recording and new recording are different, playback

images may be distorted.

Photoshot

≥Photoshot Recording results in slightly inferior image

quality.

Progressive Photoshot Function

≥The still pictures are recorded at a slightly rewound point

from where you press the [PHOTO SHOT] Button.

≥When you change to the Still Picture Mode, you will hear a

click. This is the sound of the iris closing and not an

indication of malfunction.

≥If you record still pictures in Progressive Photoshot Mode

when your Movie Camera is set to Programme AE

(

21)

the brightness of the images may change.

About [PROGRESSIVE] Setup

≥When the [æ] Indication is displayed, you can use the

Progressive Photoshot Function.

When [PROGRESSIVE] is set to [ON]:

You can use the Progressive Photoshot Function at any

time. In this case, however, the following functions are

disabled.

≥Digital Effect Modes in [EFFECT1]

(

25)

≥Digital Zoom [D.ZOOM]

(

20)

≥1/750 s or faster shutter speed

(

23)

When [PROGRESSIVE] is set to [AUTO]:

You cannot use the Progressive Photoshot Function in the

following cases.

≥When the zoom magnification is approximately 10k or

higher

≥When the shutter speed is 1/750 s or faster

≥When [EFFECT1] is set to [WIPE], [MIX], [STROBE],

[GAINUP], [TRACER], [MOSAIC], [MIRROR]

≥When the pictures are displayed on a Multi screen

Zoom In/Out Functions

≥When you are zooming on a faraway subject, a sharper

focus is achieved if the recording subject is 1.2 metres or

more away from the Movie Camera.

Optical Image Stabilizer Function

≥Within the digital zoom range, the Optical Image Stabilizer

function may not work effectively.

≥If [TAPE/CARD] selector is set to [TAPE], [MEGA OIS]

cannot be set.

≥If [PICTURE/MPEG4/VOICE] Selector is set to [MPEG4],

[MEGA OIS] cannot be set.

≥Within the digital zoom range, or when recording with a

conversion lens attached, the Optical Image Stabilizer

Function may not work effectively.

≥When a tripod is used, it is recommended that you turn the

Optical Image Stabilizer Function off.

Cinema Function

≥Cinema Function does not operate during Card Mode.

≥Using the Cinema function does not widen the recording

angle.

≥If you play back tape recorded in Cinema Mode on a

wide-screen (16:9) format TV, playback size is

automatically adjusted to fit the TV screen format. Please

refer to the TV’s operating instructions for details.

≥When images are displayed on a TV screen, the Date/Time

Indication may be erased in some cases.

≥Depending on the TV, the picture quality may be

deteriorated.

≥The Cinema Mode is cancelled when a Title is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVMX2B Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info