Bedienungsanleitung Panasonic NVMX500EG (Seite 14 von 27) (Englisch)

627478

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Others

-42-

ßA: Video Flash (setting to [AUTO]) -22-

: Video Flash turned off (when lighted yellos,

the Flash Sensor determined that the light is

needed)

-22-, -45-

£: Red Eye Reduction -22-

ª To Change the Counter Display Mode

By changing [C.DISPLAY] on the [DISPLAY SETUP]

Sub-Menu, you can change the Counter Display Mode to

Tape Counter Indication [COUNTER] (0:00.00), Memory

Counter Indication [MEMORY] (M0:00.00), and Time Code

Indication [TIMECODE] (0h00m00s00f). (

-12-) By repeatedly

pressing the [COUNTER] Button on the Remote Controller,

you can change the Counter Display Mode.

ª To Display Date/Time Indication

To display Date/Time Indication, set the appropriate

Date/Time in [DATE/TIME] on the [DISPLAY SETUP]

Sub-Menu. (

-12-)

You can also press the [DATE/TIME] Button of the Remote

Controller repeatedly to display or change the Date/Time

Indication.

ª To Change the Display Mode

By changing [DISPLAY] on the [DISPLAY SETUP]

Sub-Menu, you can change the Display Mode to All Function

Display [ALL], Partial Display [PARTIAL] and Minimum

Display [OFF]. (

-12-)

Owner ID

You can register your name and address in your Movie

Camera to identify the owner.

1 Set [CAMERA FUNCTIONS] >> [OTHER FUNCTIONS]

>> [OWNER ID SET] >> [YES].

≥The [OWNER ID] Menu appears.

2 Turn the [PUSH] Dial (26) to select [PIN NUMBER] and

press the [PUSH] Dial

(26) to input desired numbers.

3 Turn the [PUSH] Dial (26) to select numbers and press

the [PUSH] Dial

(26) to enter them.

≥You can input 4 digits.

4 Press the [∫] Button.

5 Repeat Steps 2–4 to input desired characters for

[NAME]/[HOUSE No.]/[POSTCODE].

≥You can input up to 12 characters in [NAME], and up to

11 characters in [HOUSE No.] and [POSTCODE].

6 Press the [∫] Button to finish the setup.

To verify Owner ID

Keep pressing the [;] Button for approximately 5 seconds.

To Check Owner ID

If Owner ID has already been set, carrying out Step 1 will

display [INPUT PIN NUMBER] on the screen. Input the Pin

Number you have already selected. If the number is not

correct, the screen will not change. If the number is correct,

the contents of the setup will be displayed. (By repeating

Steps 2 to 4, you can change the contents.)

Warning/Alarm Indications

If any one of the following indications lights up or flashes,

please check the condition of the Movie Camera.

3: Condensation has occurred.

-49-

Y: The accidental erasure prevention slider on the

inserted Cassette is open (that is, set to [SAVE]).

You are about to do audio dubbing on the unrecorded

(blank) portion of the tape.

No Cassette is inserted.

-9-

6: The Battery is low. Recharge it. -8-

0: The built-in battery is low. -14-

:: The video heads are dirty. -49-

2END:

The tape came to end during recording.

REMOTE:

Wrong Remote Controller Mode has been selected.

-7-

UNPLAYABLE TAPE

(OTHER FORMAT):

You are attempting to play back a tape section that has

been recorded with a different TV system.

UNABLE TO A. DUB

(LP RECORDED):

Because the original recording was done in LP Mode,

audio dubbing cannot be performed.

UNABLE TO WRITE

(WIDE MODE):

You are attempting to record a Wide Mode picture on a

tape to a Card.

INCOMPATIBLE TAPE:

This Cassette is incompatible.

PLEASE RE-OPERATE

AFTER PUSHING

RESET BUTTON:

Mechanism Irregular is detected. Press the [RESET]

Button (

-5-). This may solve the problem.

TO SERVICE:

It is a malfunction.

CARD FULL:

Card does not have sufficient memory remaining.

Select Card Mode and delete unnecessary files.

NO CARD:

Card is not inserted.

NO FILE:

Card has no files recorded on it.

UNPLAYABLE CARD:

You are attempting to play back a data which is not

compatible with this Movie Camera.

CARD ERROR:

This Card is not compatible with this Movie Camera.

COPY INHIBITED:

Because the medium is protected by a copy guard,

images cannot be recorded correctly.

INCORRECT

OPERATION:

You are attempting to record to a tape in VCR Mode.

You are pressing the [PHOTO SHOT] Button in

MPEG4 Recording or Voice Recording.

You are attempting to record to a tape in Card Mode.

CONNECT USB CABLE:

The [WEB CAMERA] Button is pressed with USB

Cable unconnected. Connect the USB Cable to the

Movie Camera and the Personal Computer.

DISCONNECT USB CABLE:

You are pressing the Recording Start/Stop Button, the

[PHOTO SHOT] Button or the [TITLE] Button in the

WEB CAMERA Mode.

You are pressing the [TITLE] Button in Camera Mode

or VCR Mode with a USB Cable connected.

You are attempting to record on a Card with a USB

Cable connected.

CANCEL WEB CAMERA MODE:

It is not possible to operate the [OFF/ON/MODE]

Selector Switch in the WEB CAMERA Mode.

Notes and Hints

ª Concerning the Power Supply

≥When the Movie Camera is used for a long time, the

Camera body becomes warm, but this is not a malfunction.

≥If the [CHARGE] Lamp does not light up although the

Battery is attached to the AC Adaptor, detach the Battery

and reattach it.

≥Battery CGP-D110 and CGP-D105 cannot be charged with

this AC Adaptor.

B5-B.book 42 ページ２００２年８月６日　火曜日　午前１１時３３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic NVMX500EG Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVMX500EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info