Bedienungsanleitung Panasonic NVMX500EG (Seite 17 von 27) (Englisch)

627478

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Others

-45-

Picture Adjustment

≥Settings once performed will remain valid so long as the

[AUTO/MANUAL/AE LOCK] Switch is set to [MANUAL]. It

is therefore recommended that the Picture Adjustment be

checked prior to recording at the [MANUAL] setting.

≥During Picture Adjustment, holding down the [PUSH] Dial

for about 2 seconds returns the bar indication to the centre

of the monitor.

ª Using The Auto Pop-up Flash

≥A slight shock accompanies when the Video Flash pops up.

≥The available range of the Video Flash is approximately

1 to 2.5 metres in a dark places. Picture will appear dark

when they are recorded by using the Video Flash at

distances greater than 2.5 metres.

≥Object of recording may appear dark if Video Flash is

lighted in front of white background.

≥Using the Video Flash fixes the shutter speed of 1/750 s or

faster to 1/500.

≥Using the Video Flash is not possible during the

Continuous Photoshot recording, the Colour Night View

Mode and the MPEG4 Recording.

≥The picture may become out of focus in a dark place. In this

case, adjust the focus manually.

≥Tele Conversion Lens (VW-LT4314ME; optional) or Wide

Conversion Lens (VW-LW4307ME; optional) can block

flash light and may cause vignetting effect.

≥Do not use the Video Flash with the ND Filter of the Filter

Kit (VW-LF43WE; optional).

≥Even if the [RED EYE REDUCTION] is set to [ON], you still

may get red eyes phenomenon depending on the recording

condition.

≥The Movie Camera, even when its Video Flash has been

turned off, automatically determines whether the flash light

is necessary or not by detecting the ambient brightness. (If

it determines that the flash light is necessary, the [ ]

Indication is displayed in yellow.)

≥When the [ß], [ßi], [ßj], [ß

A], [ßAi] or [ßAj] Indication is

displayed, the Video Flash can be lighted. (When flashing,

the Video Flash is charging.) When the [ ] Indication is

displayed, the Video Flash will not be lighted.

≥When the [P-IN-P] Button is pressed or Title is created,

Video Flash is also lighted.

≥When the [FLASH] on the [RECORDING SETUP]

Sub-Menu is set to [AUTO] and the Shutter Speed, Iris or

Gain is adjusted, the Indication ([ß], [ßi], etc.) may

disappear and the Video Flash may not be lighted.

Using the Video Flash VW-FLH3E (optional)

≥Using the Video Flash outdoors or with backlight or other

bright conditions may result in white blotches (colour

blotches) on the pictures. In this case, either adjust the iris

manually or use the Backlight Compensation Function.

≥Using the Video Flash VW-FLH3E (optional) enables you to

record still pictures farther than 2.5 metres in a dark place.

The available range is approximately 1 to 4 metres.

≥The Video Flash VW-FLH3E (optional) and the Built-in

Video Flash cannot be used simultaneously.

≥When using the Video Flash VW-FLH3E (optional), the

shutter speed, the iris and the white balance become fixed.

ª Digital Effect Functions

≥It is not possible to use [MULTI], [P-IN-P], [WIPE], [MIX] or

[TRACER] of [EFFECT1] together with the digital modes of

[EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.

≥If you have set [EFFECT2] to [B/W] or [SEPIA], changing

the selected White Balance Mode is not possible. (

-19-)

≥Setting the Cinema Mode cancels the Picture-in-Picture

Mode and the Multi-Picture Mode.

In the following cases, using the [EFFECT1] on the

[DIGITAL EFFECT] Sub-Menu is not possible.

≥When [PROGRESSIVE] is set to [ON] (

-16-)

≥When the [REC MODE] is set to [FRAME] (-16-)

≥When the Colour Night View Mode is set (

-18-)

In the following cases, using the Digital Effect Function

is not possible.

≥Card Mode

≥Title In

It is as follows when [GAINUP] is selected.

≥Manual Focus Mode

≥The shutter speed and White Balance cannot be operated.

≥The Sports Mode [5], the Portrait Mode [7] and Low

Light Mode [4] are cancelled.

Wipe Mode and Mix Mode

If either one of the following operations is carried out, stored

images will be erased, and Wipe and Mix Functions cannot

be used.

≥Use the Camera Search Function

≥Press the [STILL] Button

Picture-in-Picture Mode

≥If the [OFF/ON/MODE] Switch is operated, the smaller

picture disappears.

≥Titles cannot be inserted into the smaller picture.

Multi-Picture Mode

≥If the [MULTI] Button is pressed while self-recording Mirror

Mode (

-15-) is used, the still picture is displayed from the

upper right corner of the screen, but, in reality, the picture is

recorded from the upper left corner as usual.

≥Multi-Picture Mode cannot be used in digital still picture

mode.

≥The quality of Multi images deteriorates slightly.

≥The top and bottom of the Multi pictures will be cut off

slightly.

ª Playing Back

Repeat Playback

If you continue to press the [1] Button for 5 seconds or

longer, the Movie Camera switches to Repeat Playback

Mode, and the [R !] Indication appears. (To cancel Repeat

Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)

Listening to Playback Sound through Headphones

If you want to use the headphones to listen to the playback

sound, set [AV JACK] on the [AV IN/OUT SETUP]

Sub-Menu to [OUT/PHONES] and connect the headphones

to the [PHONES] Socket (

-6-) on the Movie Camera. In this

case, no sound (including a warning sound and shutter

sound) will be reproduced through the built-in speaker of the

Movie Camera.

≥When connecting the headphones with remote controller to

the [PHONES] Socket, the Movie Camera may cause the

mis-operation.

Choosing Sound during Playback

You can select the sound by using the [AUDIO OUT] setting

on the [PLAYBACK FUNCTIONS] Sub-Menu.

STEREO: Stereo Sound (main sound and sub sound)

L: Left channel sound (main sound)

R: Right channel sound (sub sound)

≥If you dub a tape recorded at the [12bit] selected as the

[AUDIO REC] on the [RECORDING SETUP] Sub-Menu,

playback sound becomes stereo sound regardless of the

[AUDIO OUT] setting if [12bit AUDIO] is set to [MIX].

ª Index Search Functions

≥Index Search may not be possible at the beginning of tape.

≥Because Photoshot Index Signals are not recorded on still

pictures recorded in Continuous Photoshot Mode, the

Photoshot Index Search Function cannot be used for these

still pictures.

≥Scene Index Search may not function properly if the

interval between 2 scene index signals is shorter than

1 minute.

B5-B.book 45 ページ２００２年８月６日　火曜日　午前１１時３３分

Panasonic NVMX500EG Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic NVMX500EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info