559210
103
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
VQT5C33
Operating Instructions
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
This unit is equipped with two CI/CI Plus slots. They can receive encrypted digital broadcast
services.
HDD Recorder
Model No. DMR-HCT230
DMR-HCT130
Software (Firmware) Update
Broadcast services continue to add new features. As they evolve, firmware
updates may be required to support the latest features. Panasonic strives to
continually update firmware as new technology is released. It’s very important
you install the latest updates to maintain proper operation of your unit.
For details, refer to “Software (Firmware) Update” (> 86) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)
until
2013/07/25
EG
DMR-HCT230_130EG_eng.book 1 ページ 2013年7月8日 月曜日 午後5時42分
VQT5C33
2
Small object
Keep the Memory Card out of reach of children
to prevent swallowing.
Unit
Do not place sources of naked flames, such as
lighted candles, on this unit.
This unit may receive radio interference caused
by mobile telephones during use. If such
interference occurs, please increase separation
between this unit and the mobile telephone.
This unit is intended for use in moderate
climates.
Safety precautions
WARNING
Unit
To reduce the risk of fire, electric shock or
product damage,
- Do not expose this unit to rain, moisture,
dripping or splashing.
- Do not place objects filled with liquids, such as
vases, on this unit.
- Use only the recommended accessories.
- Do not remove covers.
- Do not repair this unit by yourself. Refer
servicing to qualified service personnel.
- Do not let metal objects fall inside this unit.
- Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or
product damage,
- Ensure that the power supply voltage
corresponds to the voltage printed on this unit.
- Insert the mains plug fully into the socket
outlet.
- Do not pull, bend, or place heavy items on the
lead.
- Do not handle the plug with wet hands.
- Hold onto the mains plug body when
disconnecting the plug.
- Do not use a damaged mains plug or socket
outlet.
The mains plug is the disconnecting device.
Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
CAUTION
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or
product damage,
- Do not install or place this unit in a bookcase,
built-in cabinet or in another confined space.
Ensure this unit is well ventilated.
- Do not obstruct this unit’s ventilation openings
with newspapers, tablecloths, curtains, and
similar items.
- Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive
vibration.
DMR-HCT230_130EG_eng.book 2 ページ 2013年7月8日 月曜日 午後5時42分
VQT5C33
3
Please check and identify the supplied
accessories.
(Product numbers are correct as of July 2013.
These may be subject to change.)
Do not use AC mains lead with other equipment.
Batteries
Danger of explosion if battery is incorrectly
replaced. Replace only with the type
recommended by the manufacturer.
Mishandling of batteries can cause electrolyte
leakage and may cause a fire.
- Do not mix old and new batteries or different
types at the same time.
- Do not heat or expose to flame.
- Do not leave the battery(ies) in a car exposed
to direct sunlight for a long period of time with
doors and windows closed.
- Do not take apart or short circuit.
- Do not recharge alkaline or manganese
batteries.
- Do not use batteries if the covering has been
peeled off.
- Remove batteries if you do not intend to use
the remote control for a long period of time.
Store in a cool, dark place.
When disposing the batteries, please contact
your local authorities or dealer and ask for the
correct method of disposal.
Supplied accessories
Remote control (N2QAYB000914): 1pc.
Batteries for remote control: 2 pcs.
AC mains lead: 1pc.
RF coaxial cable: 1pc.
Indemnity concerning recorded content
Panasonic does not accept any responsibility for
damages directly or indirectly due to any type of
problems that result in loss of recording or edited
content (data), and does not guarantee any
content if recording or editing does not work
properly. Likewise, the above also applies in a
case where any type of repair is made to the unit
(including any other non-HDD related
component).
DMR-HCT230_130EG_eng.book 3 ページ 2013年7月8日 月曜日 午後5時42分
VQT5C33
4
Table of contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . 2
Supplied accessories . . . . . . . . . . . . . . . . . . . . 3
Getting started
HDD and media information. . . . . . . . . . . . . . . 6
- Playable/Recordable contents . . . . . . . . . . . . . . . . 6
- Recording mode . . . . . . . . . . . . . . . . . . . . . . . . . 7
-Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Control reference guide . . . . . . . . . . . . . . . . . 10
CI (Common Interface) module . . . . . . . . . . . 12
- About CI Plus compatible broadcast . . . . . . . . . . . 13
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
- Basic connections . . . . . . . . . . . . . . . . . . . . . . . 14
- Amplifier/receiver connections . . . . . . . . . . . . . . . 15
- Network connection . . . . . . . . . . . . . . . . . . . . . . 17
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
- TV operation buttons . . . . . . . . . . . . . . . . . . . . . 18
- Easy Setting . . . . . . . . . . . . . . . . . . . . . . . . . . 19
- Easy Network Setting. . . . . . . . . . . . . . . . . . . . . 21
FUNCTION MENU screen . . . . . . . . . . . . . . . 23
Watching broadcasts
Watching broadcasts . . . . . . . . . . . . . . . . . . . 24
- Using Channel List . . . . . . . . . . . . . . . . . . . . . . 25
- Using TV Guide system . . . . . . . . . . . . . . . . . . . 25
- Using channel information . . . . . . . . . . . . . . . . . . 26
- Operations while watching broadcast . . . . . . . . . . . 26
- REWIND LIVE TV/PAUSE LIVE TV. . . . . . . . . . . . 28
Recording
Recording TV programmes . . . . . . . . . . . . . . 29
- Operation during Recording. . . . . . . . . . . . . . . . . 30
- Notes for recording of an encrypted broadcast . . . . . 31
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 33
- Manually programming timer recording. . . . . . . . . . 34
- Timer recording options . . . . . . . . . . . . . . . . . . . 34
- Timer recording from channel information . . . . . . . . 35
- Remote recording from outside. . . . . . . . . . . . . . . 35
- Notes on timer recording. . . . . . . . . . . . . . . . . . . 35
- To confirm and edit a timer programme . . . . . . . . . 36
Playing back video
Playing titles on the HDD . . . . . . . . . . . . . . . . 37
- DIRECT NAVIGATOR screen . . . . . . . . . . . . . . . 37
Playing titles on the media . . . . . . . . . . . . . . . 40
Operation during play. . . . . . . . . . . . . . . . . . . 41
- General operations . . . . . . . . . . . . . . . . . . . . . . 41
- 3D video playback. . . . . . . . . . . . . . . . . . . . . . . 43
Editing video
Deleting/Editing recorded titles . . . . . . . . . . . 45
- Deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
- Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Copying video
Copying titles . . . . . . . . . . . . . . . . . . . . . . . . . 50
- Copying titles with copying list . . . . . . . . . . . . . . . 51
Photo and Music
Playing photos . . . . . . . . . . . . . . . . . . . . . . . . 54
- Photo Menu screen . . . . . . . . . . . . . . . . . . . . . . 54
- Photo play option . . . . . . . . . . . . . . . . . . . . . . . 55
- Slideshow settings . . . . . . . . . . . . . . . . . . . . . . 55
Editing photos . . . . . . . . . . . . . . . . . . . . . . . . 56
Copying photos . . . . . . . . . . . . . . . . . . . . . . . 57
- Selecting and copying the photos . . . . . . . . . . . . . 57
- Copying automatically . . . . . . . . . . . . . . . . . . . . 57
Playing music. . . . . . . . . . . . . . . . . . . . . . . . . 58
- Copying music (MP3) to HDD . . . . . . . . . . . . . . . 58
- Playing music recorded on HDD . . . . . . . . . . . . . . 59
- Operations during music play. . . . . . . . . . . . . . . . 60
Editing music/playlist . . . . . . . . . . . . . . . . . . . 61
Network
Smart Home Networking (DLNA) . . . . . . . . . . 62
- Using this unit as Server . . . . . . . . . . . . . . . . . . . 62
- Using this unit as Client . . . . . . . . . . . . . . . . . . . 63
- Using this unit as Media Renderer. . . . . . . . . . . . . 64
- Using Smart Home Networking (DLNA) with
Wi-Fi Direct
TM
. . . . . . . . . . . . . . . . . . . . . . . . . . 65
- Using Miracast
TM
. . . . . . . . . . . . . . . . . . . . . . . . 65
Enjoying Network Service . . . . . . . . . . . . . . . 66
- To enjoy video communication (e.g., Skype
TM
) . . . . . 66
With Other Equipment
Copying the HD Video (AVCHD) . . . . . . . . . . 67
Registering the external HDD (USB HDD)
. . . . 68
- Connecting the USB HDD . . . . . . . . . . . . . . . . . . 68
- Disconnecting the USB HDD . . . . . . . . . . . . . . . . 68
- Registering the USB HDD . . . . . . . . . . . . . . . . . . 69
DMR-HCT230_130EG_eng.book 4 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
Watching broadcasts
Recording
Playing back video
Editing video
Copying video
Photo and Music
Network
With Other Equipment
Convenient functions
Troubleshooting
Reference
VQT5C33
5
Convenient functions
VIERA Link functions . . . . . . . . . . . . . . . . . . . 70
Playback menu. . . . . . . . . . . . . . . . . . . . . . . . 71
Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . 73
- Common procedures . . . . . . . . . . . . . . . . . . . . . 73
- DVB Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
- HDD / USB HDD. . . . . . . . . . . . . . . . . . . . . . . . 77
-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
- Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
- Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
- Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
-Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
- Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Software (Firmware) Update . . . . . . . . . . . . . 86
- Update software (firmware) of this unit . . . . . . . . . . 86
- CI Plus compatible CAM software (firmware)
update
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Other operations . . . . . . . . . . . . . . . . . . . . . . 87
- Format SD card . . . . . . . . . . . . . . . . . . . . . . . . 87
- Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . 87
- Switching the aspect ratio of the screen . . . . . . . . . 88
- HOLD function . . . . . . . . . . . . . . . . . . . . . . . . . 88
Troubleshooting
Troubleshooting guide . . . . . . . . . . . . . . . . . . 89
- General operation . . . . . . . . . . . . . . . . . . . . . . . 89
- Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
- TV screen and video . . . . . . . . . . . . . . . . . . . . . 90
- Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
- Recording, timer recording and copying . . . . . . . . . 92
-Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
-Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
- Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
-USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
-TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
- Broadcast . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
- VIERA Link . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
-Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
-Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
- Messages on the unit’s display . . . . . . . . . . . . . . . 96
- When you experience problems with
Easy Network Setting
. . . . . . . . . . . . . . . . . . . . . 98
Reference
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 100
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
About descriptions in these operating
instructions
These operating instructions are applicable to models
DMR-HCT230 and DMR-HCT130. The illustrations in
these Operating Instructions show images of DMR-
HCT230 unless otherwise indicated.
[HCT230] :
indicates features applicable to DMR-HCT230 only.
[HCT130] :
indicates features applicable to DMR-HCT130 only.
Pages to be referred to are indicated as “> ±±”.
DMR-HCT230_130EG_eng.book 5 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
6
HDD and media information
Getting started
For more details, refer also to the specifications. (> 100)
(–: Impossible)
§1
It cannot be recorded directly. (Only compatible with copying from the built-in HDD)
§2
Recorded with AVCHD format compatible devices (Panasonic video camera, etc.). It may not be
able to play back depending on the device.
§3
It cannot be played back directly from the USB HDD or USB memory. Playback is possible by
copying to the built-in HDD. (> 67)
With certain recording states and folder structures, the play order may differ or playback may not be possible.
Playable/Recordable contents
Media type Standard symbol Playable contents
Recordable
contents
Built-in hard disk drive
(HDD)
[HDD]
Video
AVCHD/AVCHD 3D
•JPEG
MPO (3D photo)
•MP3
External hard disk drive
(USB HDD)
(> 8)
[USB_HDD]
Video
§1
AVCHD/AVCHD 3D
§2, 3
•MP4
Xvid
•MPEG2
•MKV
•JPEG
MPO (3D photo)
•MP3
SD Cards
[SD]
AVCHD/AVCHD 3D
§2
•MP4
•JPEG
MPO (3D photo)
•JPEG
MPO (3D photo)
USB memory [USB]
AVCHD/AVCHD 3D
§2, 3
•MP4
Xvid
•MPEG2
•MKV
•JPEG
MPO (3D photo)
•MP3
Playable contents as DLNA client
Refer to “Playable contents”. (> 64)
DMR-HCT230_130EG_eng.book 6 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
7
The video file and subtitle text files are inside the same folder, and the file names are the same except for the file extensions.
Some files may not be played back even if they have these extensions.
§1
The SD quality programme can not be converted to HD quality.
§2
You cannot select during play whether it appears or disappears.
Approximate recording times
Refer to “Recording modes and approximate recording times”. (> 102)
About extension of files
MP4: “.MP4” “.mp4” “.MOV” “.mov”
MPEG2: “.MPG” “.mpg” “.MPEG” “.mpeg” “.M2TS” “.m2ts”
“.MTS” “.mts” “.TS” “.ts”
Xvid: “.AVI” “.avi”
Subtitle text files: “.SRT” “.srt” “.SUB” “.sub” “.TXT” “.txt”
MKV: “.MKV” “.mkv”
Subtitle text files: “.SRT” “.srt” “.SSA” “.ssa” “.ASS” “.ass
“.SUB” “.sub” “.TXT” “.txt”
JPEG: “.JPG” “.jpg”
MPO: “.MPO” “.mpo”
MP3: “.MP3” “.mp3”
Recording mode
Recording Mode DR HG/HX/HE/HL/HM XP/SP/LP/EP
Feature Programmes can be
recorded in a nearly
perfect broadcasted state.
Recording can be done
with reduced recording
volume in HD quality.
Recording can be done
with reduced recording
volume in SD quality.
Quality Quality as the broadcast
High definition
§1
Standard definition
Multiple audio Record all multiple audio Record only one audio
Subtitles /
Teletext
Can be recorded
Can be recorded (only one subtitle or teletext)
§2
Surround audio Surround audio as the
broadcast
Surround audio produced
by conversion of
broadcast audio format
Stereo audio
DMR-HCT230_130EG_eng.book 7 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
8
HDD and media information
You can use an external HDD in the following two
ways. (A single HDD cannot handle those two
ways simultaneously.)
For recorded titles
Moving titles in the built-in HDD to a USB HDD
to save the capacity of the built-in HDD.
The USB HDD must first be registered on this
unit. (> 68)
For data files
Playing back MP4, JPEG, MP3, etc. (data files)
in a USB HDD with this unit.
The USB HDD must be formatted in FAT12,
FAT16, FAT32 and NTFS file system.
The USB HDD over 2 TB is not usable.
This unit supports USB 2.0 High Speed.
Although this unit can use USB 3.0 devices as USB 2.0
devices, in certain cases USB 3.0 devices cannot be used
due to differing connector shape, larger current ratings, etc.
(Use of USB 2.0 devices is recommended.)
This unit does not recognize USB HDDs other than those in
which the size of one sector is 512-bytes or 4096-bytes.
(For details, consult the dealer of your USB HDD.)
This unit does not guarantee connection with all USB
devices.
To format an SD card
Refer to “Format SD card”. (> 87)
Usable memory is slightly less than the card capacity.
If the SD card is formatted on other equipment, the time
necessary for recording may be longer or the card may not
be able to be used on this unit. In these cases, format the
card on this unit.
SDHC Memory Cards and SDXC Memory Cards can be
used in equipment that is compatible with the appropriate
cards. (SDHC Memory Cards can also be used in
equipment compatible with SDXC Memory Cards)
USB memories support FAT12, FAT16, FAT32
and NTFS file systems.
The USB memory over 2 TB is not usable.
This unit supports USB 2.0 High Speed.
This unit does not guarantee connection with all USB
devices.
Do not touch the terminal surface of the SD
cards.
Notes
Notes for an External HDD (USB HDD)
Notes for the SD cards
Compatible SD card
- SD Memory Card
(from 8 MB to 2 GB, FAT12 and FAT16
formats)
- SDHC Memory Card
(from 4 GB to 32 GB, FAT32 format)
- SDXC Memory Card
(48 GB, 64 GB, exFAT format)
Using miniSD card or microSD card
Mini-type and micro-type cards can also be
used, but must be used with adaptor cards
(optional).
Notes for the USB memories
Media handling
Do not expose the terminals of the SD card to
water, garbage or other strange things.
Do not place in the following areas:
- In hot places, such as under the direct
sunlight.
- In very dusty or humid areas.
- Locations susceptible to significant difference
in temperature (condensation can occur).
- Where static electricity or electromagnetic
waves occur.
DMR-HCT230_130EG_eng.book 8 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
9
Unit care
If the HDD or USB HDD is damaged, the
recorded content cannot be recovered.
The unit may breakdown if cigarette smoke
or bug spray/vapour, etc. gets inside the
unit.
1 Switch the unit to standby mode. (Wait until
“BYE” disappears from the display.)
2 Remove the AC mains lead from the
household mains socket.
3 Move only after the unit has come to a
complete stop (approx. 3 minutes) in order to
avoid subjecting to vibration and shock. (Even
after the unit is switched to standby mode, the
HDD continues operating for a short time.)
The registration of the USB HDD may be
cancelled in the process of repairing this unit.
You can use the USB HDD again by
re-registering, but all recorded content already on
the USB HDD will be lost. In such cases, the
recorded content (data) cannot be recovered.
This unit may contain private information. Before
disposing of or transferring this unit, perform the
following to delete the data, including personal or
secret information:
- Format HDD (> 73, 78)
- Perform “Shipping Condition” (> 73, 85)
HDD/USB HDD handling care
The HDD is a high precision device
The HDD is a high precision recording
instrument and is easily susceptible to damage.
Therefore, be careful of the following points
while the unit is turned on, especially during
operation, otherwise the HDD and the recorded
content may be damaged:
- Do not subject the unit to any vibration and
shock.
- Do not remove the AC mains lead from the
household mains socket.
This unit cannot save (backup) the HDD titles to
media. You have to be very careful when
handling the unit and editing the title.
Setup precautions
Place the unit on a surface that is flat and
not subject to vibration or impact.
Do not place on anything that generates heat
like a Set Top Box, etc.
Place in an area where condensation does
not occur. Conditions where condensation
may occur
- When there is an extreme change in
temperature (e.g., when subjected to an air
conditioner or when cooled air directly impacts
the unit).
- When there is high humidity or a lot of steam
in the room.
In the above situation, without turning the unit
on, let the unit adjust to the room temperature
and wait 2–3 hours until condensation is gone.
When moving the unit
Cleaning
Wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to
clean this unit.
Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
When requesting this unit for repair
To dispose or transfer this unit
DMR-HCT230_130EG_eng.book 9 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
10
Control reference guide
Instructions for operations are generally described using the remote control.
1 Transmit the remote control signal
Point it at remote control signal sensor on
this unit. (> 11)
2 Switch the unit from on to standby mode or
vice versa
3 TV operation buttons (> 18)
4 Select channels and title numbers, etc./Enter
numbers or characters
5 Switch to the previously watched channel
(> 24)
6 Basic operations for recording and play,
REWIND LIVE TV/PAUSE LIVE TV (> 28)
7 Show Information (> 26, 33, 38, 41)
8 Selection/OK, Frame-by-frame (> 42)
9 Show DIRECT NAVIGATOR (> 37)
: Show OPTION menu (> 45, 56, 61)
; Colour buttons (Use in accordance with
instruction on the screen.)
< Start recording (> 29)
= Select a conversion mode/recording mode
(> 29)
> Show the Timer Recording screen (> 34)
? Create chapter (> 42)
@ Select drive (HDD, SD or USB)
A To delete unwanted recorded titles, timer
programmes, photos or music (> 45)
B Channel select (> 24)/Change pages in the
DIRECT NAVIGATOR screen etc.
C Show the Network Service screen (> 66)
D Switching to the radio channel list (> 24)
E Start up a video communication (> 66)
F Exit the menu screen
G Show the TV Guide screen (> 25)
H Show the FUNCTION MENU screen (> 23)
I Return to previous screen
J Show subtitles (> 26,
43)
K Show Teletext (> 27, 43)
L Select audio (> 26, 43)
M Skip the specified time (> 42)
N Skip approx. 1 minute forward (> 42)
O Skip approx. 10 seconds backward (> 42)
Insert batteries
Insert so the poles (i and j) match those in the
remote control.
Remote control
STATUS
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
G
U
I
D
E
RETURN
PLAY/x1.3
PAUSE
PAUSE LIVE TV
STOP
SLOW/SEARCH
SKIP
CH
PAGE
TV
RADIO/
CH
AV
INPUT
TV
EXIT
OK
OPTION
VOL
0
2
abc
5
jkl
8
tuv
1
4
ghi
7
qrs
p
3
def
6
mno
9
xyz
w
PROG/CHECK
DEL
AUDIO
-10s +60s
REC MODE
DRIVE SELECT
REC TEXT STTL
CHAPTER
MANUAL SKIP
REWIND LIVE TV
INTERNET
LAST VIEW
TIME SLIP
R6/LR6, AA
(Alkaline or manganese batteries)
DMR-HCT230_130EG_eng.book 10 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
11
While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
When inserting the media, ensure that it is facing the right
way up.
Main unit
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Channel select (> 24)
3 USB port
4 SD card slot
When removing the SD card, press on the
centre of the card and pull it straight out.
5 Remote control signal sensor
Angle: Approx. 20° up and down, 30° left and
right
Distance: Within approx. 7 m in front of the
unit
Pull to flip down the front
panel.

SD card
USB memory
Display
Display
1 Drive (HDD or SD) indicator
2 Copying indicator
3 USB port indicator
4 SD card slot indicator
5 Remote control signal indicator
6 Timer recording indicator
This indicator lights up when the timer
recording standby is activated.
7 Main display section indicator
- Current time
- Playback counter
- Various messages (> 96)
8 Playback indicator
9 Recording indicator
The indicator will light up while recording.
The indicator will blink while recording is
paused and before recording starts.
PLAY
COPY
SDUSB
HDD
SD
146532
789
DMR-HCT230_130EG_eng.book 11 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
12
CI (Common Interface) module
An appropriate CI module is required to view or record the encrypted broadcast.
You need a CI module, CAM (Conditional Access Module) together with a certified Smart Card, and a
subscription with the corresponding broadcaster.
If not viewing/recording an encrypted broadcast, you do not need to insert the CI module.
TV service encryption is automatically decrypted and the broadcast can be viewed or recorded. (The
recording might be prohibited by broadcasters.)
Some CAMs may request a PIN. If prompted to enter a PIN code, enter the PIN code with the number
buttons.
If the PIN is not entered, timer recording may not work correctly. The PIN for timer recording can be
entered later. (> 73, 77, PIN Entry for Decrypt Recording)
Notes for recording of an encrypted broadcast (> 31)
You can insert one or two different CAMs with Smart Cards into this unit.
Be sure to insert the CI module horizontally into the slot.
Insert the CAM and the Smart Card with the correct direction.
When removing the CI module, pull it straight out.
For more details, see the manual of the CAM and Smart Card, or consult the dealer.
The Common Interface supports the modules that comply with DVB Specification and CI Plus Specification.
Turn off the unit before you insert or remove the CI module.
1 Insert the certified Smart Card into the CAM (both optional).
2 Insert the CI module into the CI (Common Interface) slot of this unit.
CAM
Smart Card
CI module
CI (Common Interface) slot
This unit’s rear panel
CI module
Please peel off this label to use CI module.
DMR-HCT230_130EG_eng.book 12 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
13
“CI Plus” is a technical specification that imposes
contents protection, etc.
When the CI Plus compatible broadcast is
recorded, the title may be contents protected.
There are following types of the contents
protection depending on the broadcast:
Copying not restricted
One generation copy is permitted
When convert recording mode, the original title
will be deleted.
icon will appear on the DIRECT
NAVIGATOR screen. (> 37)
Copying is prohibited
The content of these media may also have the
following playback restrictions.
- Retention limit (> right)
- Content License (> right)
There are some titles for which the playback will
be disabled after a predetermined time.
(e.g., Permitted playback period is 90 minutes
after recording.)
When the title does not have playback period,
icon will appear on the DIRECT
NAVIGATOR screen after decrypting. (> 37)
When the title has playback period, or
icon will appear on the DIRECT NAVIGATOR
screen after decrypting. (> 37)
Playing back a title with this restriction requires a
CAM with a playback licence for it.
The number of times the title can be played
back may also be limited.
When the title does not have playback period,
icon will appear on the DIRECT
NAVIGATOR screen after decrypting. (> 37)
When the title has playback period, icon
will appear on the DIRECT NAVIGATOR screen
after decrypting. (> 37)
Playing back a title with this restriction requires a
CAM and enter the PIN code.
icon will appear on the DIRECT
NAVIGATOR screen. (> 37)
Depending on your CAM, the channel list can be
updated to the one recommended by the CAM.
For details, refer to “About Operator profile”.
(> 27)
All CI Plus compatible broadcasts are encrypted. It may
take some time to display them.
For details, refer to your CAM’s operating instructions or
consult your dealer.
About CI Plus compatible broadcast
CI Plus contents protection
Retention limit
Content License
Parental Control
Operator profile
DMR-HCT230_130EG_eng.book 13 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
14
Connection
3D programmes can be played back when this unit is connected to a 3D compatible TV.
Before connection, turn off all equipment and read the appropriate operating instructions.
Basic connections
HDMI
VHF/UHF
RF IN
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
Connect only after all other
connections are complete.
HDMI cable
TV’s rear panel
RF coaxial cable
(supplied)
To the CATV terminal or the aerial
CATV coaxial cable or aerial cable
DMR-HCT230_130EG_eng.book 14 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
15
To connect and register the USB HDD
(optional)
Refer to “Registering the external HDD
(USB HDD)”. (> 68)
To connect the Communication Camera
(optional)
Refer to “Enjoying Network Service”. (> 66)
About HDMI cable
Use the High Speed HDMI cables.
Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s
HDMI cable.
When outputting 1080p signal, please use HDMI
Cables 5.0 meters or less.
This unit cannot connect the TV that does not have the
HDMI terminal.
Keep the RF coaxial cables as far away as possible from
other cables.
The HDMI connection supports VIERA Link “HDAVI
Control” (> 70).
You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display properly
or at all when connecting with a DVI/HDMI switching cable.
(Audio cannot be output.)
If you are connecting to a TV that is only compatible with
2 channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable.
VIERA Link function is possible by connecting to a TV or
amplifier/receiver compatible with VIERA Link.
When using a TV or an amplifier/receiver that does not
display “ARC compatible” on the HDMI terminal, it is
necessary to connect the TV and the amplifier/receiver with
a digital audio cable to enjoy the TV audio on the
amplifier/receiver.
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[approx. 0.2 W (“Quick Start” is not activated
and “RF OUT ( CATV Signal )” or “RF OUT
( Aerial Signal )” is set to “Off”)]
Amplifier/receiver connections
HDMI terminal
HDMI
HDMI INHDMI OUT
HDMI
cable
Amplifier/
receiver
TV
HDMI cable
(ARC compatible)
(ARC compatible)
3D programmes can be played back when
this unit is connected to a 3D compatible
amplifier/receiver and a 3D compatible TV.
You will not be able to view 3D programmes
with this connection if your amplifier/receiver
is not 3D compatible.
DMR-HCT230_130EG_eng.book 15 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
16
Connection
Amplifier/receiver not compatible with 3D
VIERA Link function is possible by connecting to a TV or
amplifier/receiver compatible with VIERA Link.
When using a TV or an amplifier/receiver that does not
display “ARC compatible” on the HDMI terminal, it is
necessary to connect the TV and the amplifier/receiver with
a digital audio cable to enjoy the TV audio on the
amplifier/receiver.
When you do not want the audio to be output from the TV,
set “HDMI Audio Output” to “Off” (> 73, 81).
HDMI IN
HDMI
HDMI
HDMI cable
Amplifier/receiver
TV
HDMI cable
(ARC compatible)
(ARC compatible)
3D programmes can be played back when
this unit is connected to a 3D compatible
TV.
This connection only supports up to 5.1ch.
DIGITAL AUDIO OUT terminal
OPTICAL IN
Amplifier/receiver
Optical digital
audio cable
DMR-HCT230_130EG_eng.book 16 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
17
When this unit is connected to the network, you
can enjoy network functions (DLNA function,
Network Service , Remote Recording, etc.).
For details about connection method, refer to the
instructions supplied with the connected
equipment.
After you make the LAN cable/Wireless LAN
connection, the network setting is needed.
(> 21, Easy Network Setting)
Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
For up-to-date compatibility information on your Wireless
router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
The unit is not compatible with public wireless LAN
services.
Network connection
Precautions of Wireless LAN connection
The following limits are in place regarding the
usage of this unit. You must be aware of these
limits before using this unit.
Panasonic will in no way be responsible for any
incidental damage which may arise due to a
failure to obey these limits, or to any condition of
use or disuse of this unit.
Data transmitted and received over radio
waves may be intercepted and monitored.
This unit contains delicate electronic
components.
Please use this unit in the manner in which it
was intended and follow the following points:
- Do not expose this unit to high temperatures
or direct sunlight.
- Do not bend, or subject this unit to strong
impacts.
- Keep this unit away from moisture.
- Do not disassemble or alter this unit in any
way.
LAN cable connection
Wireless LAN connection
Broadband
router, etc.
Internet
LAN (ethernet) cable
Internet
Wireless router, etc.
DMR-HCT230_130EG_eng.book 17 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
18
Settings
The TV can be operated from the TV operation
buttons of the remote control.
Perform the setting if you cannot operate the TV
with the TV operation buttons.
While pressing [TV Í], enter the code with
the number buttons.
Manufacturer and Code No.
If your TV brand has more than one code listed, select the
one that allows correct operation.
If the brand of your TV is not listed or the code number is
invalid for your TV, this remote control is not compatible
with your TV.
STATUS
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
G
U
I
D
E
RETURN
PLAY/x1.3
PAUSE
PAUSE LIVE TV
STOP
SLOW/SEARCH
SKIP
CH
PAGE
TV
RADIO/
CH
AV
INPUT
TV
EXIT
OK
OPTION
VOL
0
2
abc
5
jkl
8
tuv
1
4
ghi
7
qrs
p
3
def
6
mno
9
xyz
w
TIME SLIP
PROG/CHECK
DEL
AUDIO
-10s +60s
REC MODE
DRIVE SELECT
REC TEXT STTL
CHAPTER
MANUAL SKIP
REWIND LIVE TV
INTERNET
LAST VIEW
F
U
N
C
T
I
O
N
M
E
N
U
TV operation buttons
(> right)
Select and enter buttons
To return to the previous
screen
To exit the screen
FUNCTION MENU (> 23)
TV operation buttons
Brand Code Brand Code
AIWA 35
BENQ 58/59
BRANDT 10/15
CENTREX 66
CURTIS 05
DESMET 05
ELEMIS 05
FINLUX 61
Panasonic 01/02/03/04
AKAI 27/30
BEKO 05/71/72/73/74
BUSH 05
DAEWOO 64/65
DUAL 05
FERGUSON 10/34
FISHER 21
MITSUBISHI 05/19/20/47
METZ 05/28/79
MIVAR 24
NEC 36
NOKIA 25/26/27/60/61
OLEVIA 45
ORION 05
PHILCO 41/48/64
PHONOLA 05
PROVIEW 52
RADIOLA 05
NOBLEX 33
NORDMENDE 10
ONWA 30/39/70
PEONY 49/69
PHILIPS 05/06/46
PIONEER 37/38
PYE 05
SABA 10
FUJITSU 53
ITT
LG
GOLDSTAR 05/50/51
GRADIENTE 36
25
JVC 17/30/39/70
KOLIN 45
05/50/51
MAG 52
FUNAI 63/67
GOODMANS 05
GRUNDIG 09
IRRADIO 30
KDS 52
KONKA 62
HITACHI 05/22/23/40/41
SALORA 26
SANSUI 05
32/42/43/65/68SAMSUNG
SCHNEIDER 05/29/30
SELECO 05/25
SIEMENS 09
SONY 08
TELEFUNKEN 10/11/12/13/14
TOSHIBA 16/57
YAMAHA 18/41
05
WHITE
WESTINGHOUSE
SANYO 21/54/55/56
05/69/75/76/77/78
SEG
SINUDYNE 05
31/33/66/67/69TCL
TEVION 52
THOMSON 10/15/44
SHARP 18
DMR-HCT230_130EG_eng.book 18 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
19
The tuner in this unit is compatible with digital
Cable broadcast services and digital terrestrial
broadcast services.
In these operating instructions,
[DVB-C] : indicates features applicable to digital
cable broadcasts (DVB-C).
[DVB-T] : indicates features applicable to digital
terrestrial broadcasts (DVB-T).
This unit can receive only one of the two
services at a time.
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
3 Select language, then press [OK].
4 Select country, then press [OK].
5 Select “Digital Cable (DVB-C) Channels” or
“Digital Terrestrial (DVB-T) Channels”, then
press [OK].
Easy Setting
2 Press [Í] on the remote control or [Í/I] on
this unit.
The Easy Setting will start at the initial
power on.
1 [DVB-C]
Select the channel number allocation,
then press [OK].
For Germany and Austria:
Normally set to “Preset Channel
Number”.
For Switzerland:
Normally set to “Operator’s Channel
Number ( LCN )”.
To change channel allocation, restart Auto Setup
in Basic Settings menu and change channel
number allocation selection. (> 75)
2 [DVB-C]
Select “Start Auto Setup”, then press
[OK].
Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
•Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
6 Auto Setup will start automatically.
(This operation may take some time.)
e.g., [DVB-C]
[DVB-C]
When tuning is completed, press [OK].
Auto Setup
Progress
This will take about 3 minutes.
No. Channel Name Type Quality
Free TV: 0 Pay TV: 0 Radio: 0
Searching
0%
100%
DMR-HCT230_130EG_eng.book 19 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
20
Settings
8 Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
9 Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 80)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
Select “Yes” to proceed to “Easy Network
Setting”. (> 21)
Select “No” to finish the Easy Setting.
To stop partway
Press [RETURN ].
To restart setup or change TV signal type
1 Press [FUNCTION MENU]. (> 18)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Auto Setup” in “DVB Tuning”, then
press [OK].
4 Select “Yes”, then press [OK].
If you are asked to select the auto setup
method, refer to “Auto Setup”. (> 75)
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (> 25)
If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
7 Clock will be set automatically.
If the clock setting screen appears, set the
time manually (> 85, Clock).
•On
It is possible to start quickly from standby
mode.
•Off
Power consumption in standby mode is
minimized. (> 100)
However, startup time from standby mode
will be longer.
Timer Setting for Quick Start
“Quick Start” is activated when the set time
comes.
DMR-HCT230_130EG_eng.book 20 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
21
After completing “Easy Setting”, you can continue
with “Easy Network Setting”.
1 Select “Wired” or “Wireless”, then press
[OK].
3 When “Easy Network Setting is finished.”
appears.
Press [OK].
If your wireless network is encrypted, Encryption
Key Input Screen will be displayed.
Input the encryption key of your network.
Easy Network Setting
2 Follow the on-screen instructions and make
the following confirmation and settings.
“Wired” connection:
- Home Network Connection Check
- Home Network function
- Remote Recording function
- Internet Connection Test
“Wireless” connection:
Before beginning wireless connection
setup obtain your Network name (SSID).
An SSID (Service Set IDentification) is a
name used by wireless LAN to identify a
particular network. Transmission is
possible if the SSID matches for both
devices.
- Wireless Settings
- Home Network Connection Check
- Home Network function
- Remote Recording function
- Internet Connection Test
OK
RETURN
Easy Network Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Select “Wireless”.
Current setting : Wired
Wired
Wireless
Connection method to wireless access point
Search for wireless network:
1 Select “Search for wireless network”, then
press [OK].
2 The available wireless networks will be
displayed. Select your network name and
press [OK].
- If your Network name is not displayed search
again by pressing the red button on the
remote control.
- Stealth SSID will not be displayed. Enter
manually by using “Wireless Settings”.
(> 73, 81)
WPS (PUSH button):
If your Wireless router supports WPS (PUSH
button), you can easily perform the settings by
pressing WPS button on it.
WPS (Wi-Fi Protected Setup™) is a standard that
facilitates settings relating to the connection and
security of wireless LAN devices.
1 Select “WPS (PUSH button)”, then press [OK].
2 Press WPS button or corresponding button of
Wireless router until the lamp starts flashing.
Wi-Fi Protected Setup™-compatible
Wireless router may have the mark.
For details, refer to the operating instruction
of Wireless router.
3 Press [OK].
e.g.,
DMR-HCT230_130EG_eng.book 21 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
22
Settings
When you experience problems
Refer to “When you experience problems with
Easy Network Setting”. (> 98)
To restart Easy Network Setting
1 Press [FUNCTION MENU]. (> 18)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Easy Network Setting” in “Network”,
then press [OK].
To redo settings individually
If “Easy Network Setting” did not work properly or
when you change the settings individually,
perform the following steps:
1 Press [FUNCTION MENU]. (> 18)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Network Settings” in “Network”, then
press [OK].
4 Refer to “Network Settings”. (> 81)
Check security before using Home Network
function
If you set “Home Network function” to “On”, all
connected devices on the same network can
access this unit. Ensure that the router for your
home network has adequate security system to
prevent unauthorized access.
Refer to the operating instructions of the hub or router.
If you set “Home Network function” or “Remote Recording
function” to “On”, the setting for “Quick Start” is fixed to
“On”.
Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
After performing network settings on this unit, the settings
(encryption level, etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of Wireless router.
Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
DMR-HCT230_130EG_eng.book 22 ページ 2013年7月8日 月曜日 午後5時42分
Getting started
VQT5C33
23
FUNCTION MENU screen
You can easily access the desired functions, such
as playback, timer recording, the unit’s settings
etc. via the FUNCTION MENU.
1 Press [FUNCTION MENU].
2 Select the item, then press [OK].
•Media
- SD Card
- USB device
- USB HDD
•TV Guide (> 25)
Timer Recording (> 34)
Network Service (> 66)
Contents on HDD
- Video (> 37)
-Photo (> 54)
-Music (> 58)
Home Network
- Miracast (> 65)
- DLNA Client (> 63)
- Media Renderer (> 64)
- Wi-Fi Direct (> 65)
•Setup
- Basic Settings (> 73)
You can change the unit’s settings of DVB
Tuning, Sound, Display, Connection,
Network etc.
- Remote Recording (> 35)
- Wallpaper
Personalize a background of the FUNCTION
MENU.
To select from among “Photo”, register photo
in advance. (> 55)
•Watch TV (> 25)
Copy Video (> 51)
RETURN
FUNCTION MENU
OK
Media TV Guide
Home Network
Copy VideoSetup
Timer Recording
Contents on HDD
Watch TV
Network Service
Video
Contents on HDD
Title, Photo or Music on HDD can be played.
Photo
Music
Contents on HDD
RETURN
Press
OK
Press
e.g.,
FUNCTION MENU list
DMR-HCT230_130EG_eng.book 23 ページ 2013年7月8日 月曜日 午後5時42分
Watching broadcasts
VQT5C33
24
Watching broadcasts
Wat ching
broadcasts
To switch to the channel you have previously
watched
Press [LAST VIEW ].
This function will work only for the channels you
have watched for more than 10 seconds.
To switch to the radio channels or to the all
channels
Press [RADIO/TV].
Selection of channel is made easy by creating a Favourite
of the channels. (> 75, Favourites Edit)
When you are watching the 3D programme, subtitles and
TV Guide, etc., may not display correctly depending on the
settings. (> 43, 44, 3D Type, Signal Format)
Enter the PIN with the number buttons by
following the on-screen instructions.
If you decide on a PIN, make a note it in case
you forgot it.
PIN (except CAM’s) can be changed via “PIN
Entry”. (> 85)
For CAM’s PIN, refer to your CAM’s operating
instructions.
To watch an encrypted broadcast, insert the CI
module into the CI slot. (> 12)
Set according to the CI module. (> 73, 81,
Common Interface)
Instructions for operations are generally
described using the remote control. (> 10)
Press [CH WX] to select the channel.
You can also select the channel by the
following operations.
- Using number buttons
- Using Channel List (> 25)
- Using TV Guide system (> 25)
- Using channel information (> 26)
If this unit request a PIN
If encrypted channels do not appear
DMR-HCT230_130EG_eng.book 24 ページ 2013年7月8日 月曜日 午後5時42分
Watching broadcasts
VQT5C33
25
You can select from the list of channel names.
2 Select the channel, then press [OK].
To skip unwanted channels
[DVB-C]
The channel is skipped next time you select the
channel.
1 While watching the broadcast to skip, press
[DEL].
2 Press [OK].
You can select the skipped channel with the number
buttons.
When you want to restore the skipped channel, edit the
channel list. (> 73, 76)
To edit the channel list
Refer to “Channel List”. (> 76)
1 Press [GUIDE].
TV Guide screen appears.
2 Select the programme, then press [OK].
3 Select “View”, then press [OK].
Page up/down
Press [CH WX].
To view a programme list for another day
Press the green button (Previous) or the yellow
button (Next).
To see programme information
Press [STATUS ].
To retrieve the programme data for the area
where data have not been acquired
Select the area, then press [STATUS ].
Some broadcasters may not send the
programme data. You cannot retrieve the data
from them.
To set a timer Recording using the TV Guide
System
Refer to “Timer recording”. (> 33)
If you make access to Rovi Guide via Network Service , you
can use an additional TV Guide which can search
programmes by keywords and can display the detailed
information, etc. (current as of July, 2013). (> 66)
Using Channel List
1 Press [OK].
To sort the channel, press the red button.
To change the category, press the blue
button.
All DVB Channels
Select
View
RETURN
7
6
5
4
3
2
1
Page up
Page down
Category
123/ABC
Sorting 123...
Channel names
Encrypted channel
Using TV Guide system
Page Down
Information
Page Up
Category+24 hoursTimer Rec.
TUE 01.01
TV Guide
8:00 - 9:45
TUE 01.01.2013 8:05
Category: All DVB Channels
8:00 8:30 9:00 9:30 10:00 10:30
OK
RETURN
DMR-HCT230_130EG_eng.book 25 ページ 2013年7月8日 月曜日 午後5時42分
Watching broadcasts
VQT5C33
26
Watching broadcasts
While watching a programme
Press [STATUS ].
Channel information appears.
1 Current Category
2 Encrypted broadcast
3 Set timer (> 35)
4 Subtitle
5 Telet ex t
6 Multiple audio/Sub Channel
7 Data service (Hybrid Broadcast Broadband
TV) (> 27)
To show detailed information
Press [STATUS ] again.
To hide the information screen
Press [EXIT ].
To switch between the current programme
and the next programme
Press [2, 1].
To switch to another channel
Press [3, 4], then press [OK].
When “ ” appears in channel information
(> left)
Press [STTL ].
Press again to hide subtitle.
Some subtitle contents can be displayed using Teletext.
(> 27)
Press [AUDIO].
Audio will switch according to the contents of
the programme every time it is pressed.
Using channel information
To change Category
Press the blue button.
To register your favourite channels
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Favourites Edit”, then press [OK].
4 Refer to “Favourites Edit”. (> 75)
HDD
71:20 DR
1
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer

e.g.,
Operations while watching broadcast
To show subtitle
To change subtitle language
1 Press [OPTION].
2 Select “Subtitle Language” in “Digital TV
Menu”, then press [OK].
3 Select the desired language.
Press [EXIT ] to exit the screen.
Switching audio
DMR-HCT230_130EG_eng.book 26 ページ 2013年7月8日 月曜日 午後5時42分
Watching broadcasts
VQT5C33
27
You can enjoy the interactive data services for
digital broadcasting.
To use Hybrid Broadcast Broadband TV
application, perform network connection and
settings. (> 17, 21)
When notification message is displayed:
Follow the on-screen instructions.
When the Teletext is included in data service:
When [TEXT ] is pressed, the Teletext of data
service will be displayed.
Operation buttons:
[3, 4, 2, 1], [OK], number buttons or colour buttons, etc.
Operations may vary depending on the broadcaster.
On-screen instructions may not correspond to the remote
control buttons.
It may take some time to show the data service.
Not all the data services are available depending on the
broadcaster.
Some functions of the data service may be deactivated
during recording.
When “ appears in channel information
(> 26)
2 Use [3, 4, 2, 1], number buttons or colour
buttons, etc. according to on-screen
instructions.
You can change the display mode. (> 80, Teletext)
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 88)
When a programme includes audio signals etc.,
you can select signals.
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Multi Audio” or “Sub Channel”, then
press [OK].
4 Select the item.
Depending on your CAM, the channel list can be
updated to the one recommended by the CAM.
To perform an update, operate following the
instructions on the screen.
If cancelled, the notification is instead displayed
on the channel information (> 26).
e.g.,
To execute channel list upgrade, press the red
button.
Performing an update will delete the existing channel list.
To return to the original channel list, restart “Auto Setup” in
“Basic Settings” menu. (> 75)
The timer recording programmes may be cancelled. Please
confirm a timer programme. (> 36)
To use data service (Hybrid Broadcast
Broadband TV)
To show the Teletext
1 Press [TEXT ].
When the Teletext of data service is
displayed, press [TEXT ] again.
Aspect
To select the contents in the broadcast
About Operator profile
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Operator Profile Info
DMR-HCT230_130EG_eng.book 27 ページ 2013年7月8日 月曜日 午後5時42分
Watching broadcasts
VQT5C33
28
Watching broadcasts
This unit temporarily saves a live TV programme
you are watching with this unit’s tuner on HDD.
REWIND LIVE TV
You can rewind live TV programme to the point
where temporary save has started (up to
1.5 hours).
PAUSE LIVE TV
You can pause live TV programme and restart
watching from the paused position.
While pausing or rewinding a broadcast:
Press [STATUS ].
Press [STATUS ] again.
1 The time that you can rewind the live
programme.
2 The amount of time temporarily saved on
HDD.
3 The time of the current playback position.
To stop REWIND LIVE TV or PAUSE LIVE TV
1Press [STOP].
2 Select “Yes”, then press [OK].
To hide the display information
Press [EXIT ].
The unit cannot rewind and play more than 1.5 hours prior
to the current time.
Temporary save stops in the following cases:
- When switching to other channels or other screen
- When recording of the watching programme is started
- When two programmes simultaneous recording is started
- When performing PAUSE LIVE TV or REWIND LIVE TV
for more than 8 hours (This may vary depending on the
HDD free space.)
These functions do not work in the following cases:
- When the clock is not set
- When setting clock manually (Contents protected title
(Retention limit) only) (> 13)
- While recording two programmes simultaneously
- While copying
- While watching a programme being recorded
- When a radio programme is selected
- While watching an encrypted programme
- REWIND LIVE TV:
When “REWIND LIVE TV” is set to “Off” (> 77)
PAUSE LIVE TV:
You can operate this unit with the TV remote control by
using VIERA Link (> 70).
Refer to the TV operating instructions.
REWIND LIVE TV/PAUSE LIVE TV
1 While watching TV
REWIND LIVE TV:
Press [SLOW/SEARCH 6] to rewind.
PAUSE LIVE TV:
Press [PAUSE ;] to pause.
The maximum amount of the temporary
save is 1.5 hours.
2 When you want to resume:
Press [PLAY/a1.3 1].
You can perform search or Quick View, etc.
If temporary save stops (> right), playback
will be performed by that point.
Display information
Pause
8:05 9:35
8:50
8:50:55 01.01.2013
Play
8:50.50
DMR-HCT230_130EG_eng.book 28 ページ 2013年7月8日 月曜日 午後5時42分
Recording
VQT5C33
29
Recording TV programmes
Recording
The titles can only be recorded to built-in
HDD and cannot be copied from built-in HDD
to the media other than USB HDD.
This unit can record two programmes being
broadcasted at the same time.
About CI Plus restriction (> 13)
Notes for recording of an encrypted broadcast
(> 31)
1 Select the channel to record.
2 Press [REC MODE] and select the
conversion mode, then press [OK].
This unit will record the programmes in DR
mode once, and then automatically
convert to the selected recording mode
while this unit is in standby.
Recording mode (> 7)
The conversion mode set here is used
as an initial value for the next recording.
3 Press [REC ¥].
Recording starts.
HG
HX
HE
HL
HM
XP
SP
LP
EP
Off (DR)
Conversion Mode Setting
OK
RETURN
HDD Remain (DR)m
h
High
Definition
Data Size
Large
Small
Large
Small
Standard
Definition
4 Select “Automatic Stop”, then press
[OK].
One touch recording (OTR)
Recording stops automatically when the
programme ends.
You can also select “Recording Time” or
“Continuous recording”. (> below)
To set the recording time
1 Select “Recording Time” or “Continuous
recording” in step 4 (> above).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
You can select the recording time with
[2, 1].
Continuous recording:
The recording is continued until you press
[STOP ].
2 Press [OK].
Automatic Stop at 8:45
REC1/OTR
Recording Time
Continuous recording
30 min
8:00 - 8:45
DMR-HCT230_130EG_eng.book 29 ページ 2013年7月8日 月曜日 午後5時42分
Recording
VQT5C33
30
Recording TV programmes
To convert the recording mode after recording
in DR mode
Refer to “File Conversion”. (> 47)
To confirm whether the conversion is
completed
Refer to “To confirm whether the conversion is
completed”. (> 47)
To cancel a conversion
Refer to “To cancel a “During standby”
conversion”. (> 48)
One recording will terminate when simultaneous recording
is being done and timer recording starts.
When the programme recorded in DR mode is converted,
teletext will not be recorded.
Data service will not be recorded.
Following contents or media cannot be played back while
recording.
- Xvid and MKV file
- photo
- USB HDD (For data files, > 8) and USB memory
Copying cannot be performed while recording.
When “Automatic Standby after OTR” is set to “On” (> 84),
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
“Automatic Stop” or “Recording Time”.
When a programme is recorded in encrypted form,
conversion will not start until decryption has finished.
(> 31)
The title before conversion (the title recorded in DR mode)
will be deleted once the conversion is completed.
Conversion will take about the same time as the recorded
duration.
When the HDD does not have enough remaining space,
conversion will not start.
Conversion is stopped when this unit is turned on.
Conversion will start from the beginning again once the unit
is switched to standby mode.
The conversion will not start if the timer recording is
scheduled within the time required for the conversion.
When converted, audio content and subtitle will be
converted with the same settings as at the start of
recording.
Press [STATUS ].
e.g., While recording two programmes simultaneously
Press [STOP ].
When recording one programme:
If the following screen appears
Select “Yes”, then press [OK].
When recording two programmes:
If the following screen appears
1 Select the programme, then press [OK].
2 Select “Yes”, then press [OK].
Operation during Recording
To check the recording programme
To stop recording
REC2
HDD
REC1/OTR AUTO
5
Recording programme
displayed on the TV
Recording programme not displayed on the TV
Stop Recording
Yes
No
Recording of this programme is in progress.
Stop this recording ?
OK
RETURN
1
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
OK
RETURN
1
2
DMR-HCT230_130EG_eng.book 30 ページ 2013年7月8日 月曜日 午後5時42分
Recording
VQT5C33
31
After displaying the recording programme, press
[PAUSE ;].
Press again to restart recording.
(A title is not split into separate titles.)
Timer recording programme cannot be paused.
While recording, perform steps 1–4 on page 29.
Channel can only be switched between the recording
programmes.
You can play the recording title from the beginning
or the titles previously recorded to the HDD.
This unit allows you to record/view/play an
encrypted programme by decryption using a
supporting CI module.
The recording of encrypted broadcasts differs
according to the “Recording for Encrypted
Channel” (> 77) settings as follows.
§
Depending on the specifications of the CI
module, the broadcast may be recorded in the
encrypted form. (> below)
Two programmes (e.g., “A” and “B”) which need
the same CI module for decryption will be
recorded/viewed/played as follows:
When “Automatic” is selected
To pause recording
To record two programmes simultaneously
Simultaneous rec and play
1 Press [DIRECT NAVIGATOR].
[” is displayed on the recording programme.
2 Select the title, then press [OK].
Page
Select
OPTION
Start Time
Prog.Type:
Rec Time
Play
RETURN
Channel Date Title Name
Delete
Drama
9:00 0:10(DR)
04.10
04.10
29.10
29.10
Channel Date Title Name
Notes for recording of an encrypted
broadcast
Recording of encrypted broadcast
Supporting CI
module is
inserted
Supporting CI
module is not
inserted
Automatic Record
(Decrypted)
§
Record
(Encrypted)
Decrypt
Recording
Record
(Decrypted)
Recording
impossible
Encrypt
Recording
Record
(Encrypted)
Record
(Encrypted)
2 encrypted programmes simultaneous
recording/viewing/playing
Programme “A” “B”
While recording
programme “A”, start
recording programme
“B”.
Record
(Decrypted)
Record
(Encrypted)
While viewing/playing
programme “A”, start
timer recording
programme “B”.
Viewing/
playing
possible
Record
(Encrypted)
While recording
programme “A”,
view/play programme
“B”.
Record
(Decrypted)
Viewing/
playing
impossible
DMR-HCT230_130EG_eng.book 31 ページ 2013年7月8日 月曜日 午後5時42分
Recording
VQT5C33
32
Recording TV programmes
When “Decrypt Recording” is selected
When “Encrypt Recording” is selected
Programmes recorded in encrypted form ( )
have the following restrictions:
- The encrypted title can be played back, but it
does not mean that it is decrypted and saved in
the decrypted form.
- Depending on the programme, it may not be
possible to play back/decrypt after recording.
- There are restrictions on the playback and
editing of encrypted programmes.
- To copy an encrypted programme, decryption
must be performed.
Decryption is performed when the unit is turned
off. It will take about the same time as the
recorded duration.
“COPY” on the unit's display remains lighted
during decryption.
It is also possible to decrypt manually
Refer to “File Decryption”. (> 48)
To decrypt, insert the CI module into the CI slot (> 12).
During decryption, do not remove the CI module from this
unit.
The title before decryption will be deleted once decryption
is completed.
When the HDD does not have enough remaining space,
decryption will not start.
This function is stopped when this unit is turned on.
Decryption will start from the beginning again once the unit
is turned off.
The decryption will not start if the timer recording is
scheduled within the time required for the decryption.
When a decryption fails, the screen icon ( ) is changed
to “ ” or “ (Grey)”.
- : In this case, try to decrypt the title manually. (> 48)
- (Grey): When the title is copy protected (Copying is
prohibited) by CI Plus CAM, operation on the title is not
possible except for deletion. In this case, delete the title.
Programme “A” “B”
While recording
programme “A”, start
recording programme
“B”.
Record
(Decrypted)
Recording
impossible
While viewing/playing
programme “A”, start
timer recording
programme “B”.
Viewing/
playing
impossible
Record
(Decrypted)
While recording
programme “A”,
view/play programme
“B”.
Record
(Decrypted)
Viewing/
playing
impossible
Programme “A” “B”
While recording
programme “A”, start
recording programme
“B”.
Record
(Encrypted)
Record
(Encrypted)
While viewing/playing
programme “A”, start
timer recording
programme “B”.
Viewing/
playing
possible
Record
(Encrypted)
While recording
programme “A”,
view/play programme
“B”.
Record
(Encrypted)
Viewing/
playing
possible
Encrypted titles
Decryption
COPY
DMR-HCT230_130EG_eng.book 32 ページ 2013年7月8日 月曜日 午後5時42分
Recording
VQT5C33
33
Timer recording
To use TV Guide system
Refer to “Using TV Guide system”. (> 25)
To select the programmes of a specific
category
1 On the TV Guide screen:
Press the blue button.
2 Select the item, then press [OK].
To return to the previous TV Guide list
Select “All DVB Channels”.
To edit the timer recording on the TV Guide
screen
1 Select the programme to edit, then press the
red button.
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 34, “Manually
programming timer recording”.
To cancel a timer recording on the TV Guide
screen
1 Select the programme to cancel, then press
the red button.
2 Select “Timer Rec Cancel”, then press [OK].
(“F” disappears)
Operation during Recording
Refer to “Operation during Recording”. (> 30)
Confirm the number of active timer recording
in standby mode
Press [STATUS ] in standby mode.
When there are active timer recording, “1 REC” or
“2 REC” displayed on the unit’s display.
Some broadcasters may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (> 34)
Category may not be assigned correctly depending on the
programme information.
You can set the start and finish time to make the timer
recording work successfully. (> 73, 77, Timer Record Start
Buffer, Timer Record Stop Buffer)
This operation will only record to built-in HDD.
This unit can record two programmes being
broadcasted at the same time.
About CI Plus restriction (> 13)
Notes for recording of an encrypted broadcast
(> 31)
Preparation
If you want to change the recording mode:
Press [REC MODE] and select the recording
mode, then press [OK].
1 Press [GUIDE].
TV Guide screen appears.
2 Select the programme, then press the
red button.
The timer iconF” (red) is displayed.
If on-screen instructions are displayed,
follow them.
Page Down
Information
Page Up
Category+24 hoursTimer Rec.
TUE 01.01
TV Guide
8:00 - 9:45
TUE 01.01.2013 8:05
Category: All DVB Channels
8:00 8:30 9:00 9:30 10:00 10:30
OK
RETURN
DMR-HCT230_130EG_eng.book 33 ページ 2013年7月8日 月曜日 午後5時42分
Recording
VQT5C33
34
Timer recording
1 Press [PROG/CHECK].
2 Select “New Timer Programme”, then press
[OK].
To confirm and edit the timer programme
Refer to “To confirm and edit a timer programme”.
(> 36)
Operation during Recording
Refer to “Operation during Recording”. (> 30)
Select the items and change the items.
Channel
You can select Category with the red button.
Start/Stop
Press and hold [3, 4] to alter in 15-minute
increments.
Mode/Conv.
Refer to step 2. (> 29)
Subtitles
(Only when item other than “OFF” is selected in
“Conv.”)
Title Name
1 Select “Title Name”, then press [OK].
2 Refer to “Entering text”. (> 87)
Manually programming timer
recording
3 Select the items and change the items.
(> right, Timer recording options)
4 Press [OK].
The timer programme is stored.
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 0/32
Timer Recording
30:30 DRHDD TUE 01.01.2013 8:05
Delete
New Timer Programme
Info
Channel Name
Schedule
Mode
Space
Timer Recording
30:30 DRHDD TUE 01.01.2013 8:05
New Timer Programme
OK
Programme Name
WED 02.01
8:00 - 9:00
DR
Timer recording options
Day/Date
You can select “Date” or “Weekly” by pressing
the green button.
Auto Renewal Recording
(Only daily/weekly timer recording)
The unit will record the new programme over
the old one.
Press the yellow button.
“Renew : ON” is displayed.
Timer Recording TUE 01.01.2013 8:05
30:24 DR
Channel
1 WED 02.01
Day/Date Stop
8:00 9:00
Start
RETURN
Category
Date/
Weekly
Title Name
DR OFF
Mode
OFF
Conv. Subtitles
OK
HDD
e.g.,
DMR-HCT230_130EG_eng.book 34 ページ 2013年7月8日 月曜日 午後5時42分
Recording
VQT5C33
35
You can make timer recording of the current or
next programme.
1 While watching a programme
Press [STATUS ].
3 Press the yellow button.
4 Go to step 3 on page 34, “Manually
programming timer recording”.
You can set a recording from a smartphone or a
PC, etc. away from home. (You must register to a
service to use this function.)
For details, please check the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Preparation
Network connection (> 17, 21)
Remote Recording Function Settings (> 73
, 82)
This unit will always be connected to the Internet when this
function is activated.
Please note that a regular maintenance or unexpected
trouble may interrupt the service, and that the service
content may be changed or revoked and operation menu
screens may be changed with or without a prior notice.
Timer recording from channel
information
2 Display the channel information of a
programme to record.
Switch the programme with [2, 1].
Switch the channel with [3, 4].
Remote recording from outside
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer
e.g.,
This unit
PC, Smartphone,
etc.
Internet
Timer recording
Notes on timer recording
You can enter up to 32 programmes within a
month in advance. (Each daily or weekly
programme is counted as one programme.)
When the programme recorded in DR mode is
converted, the audio content and subtitle
language will be selected according to the
following settings:
- “Multi Audio” of “Preferred Language” (> 77)
- “Subtitles” of “Preferred Language” (> 77)
- Audio for HG / HX / HE / HL / HM Recording
(> 79)
When the programme recorded in DR mode is
converted, teletext will not be recorded.
Data service will not be recorded.
(Only when recording broadcast in other than
DR mode)
This unit will record in the DR mode once, and
then convert to the selected mode automatically
during standby. If the title has not been
decrypted, conversion will start after decryption.
Even if you switch the unit to standby mode
during the timer recording, the recording is
continued.
When you programme successive timer
recordings to start, about last 1 minute of earlier
programme will not be recorded.
Timer recording will not start while:
- converting a title in “File Conversion” (Only
when “Now” is selected)
- copying HD Video (AVCHD) from USB device
or SD card
- copying photos/music
-formatting
DMR-HCT230_130EG_eng.book 35 ページ 2013年7月8日 月曜日 午後5時42分
Recording
VQT5C33
36
Timer recording
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT ].
To confirm and edit a timer
programme
To deactivate a timer programme
Press the red button.
The timer icon “F will change from red to
grey.
Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
Refer to “Timer recording options”.
(> 34)
3 Press [OK].
To show programme information
Press [STATUS ].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD TUE 01.01.2013 8:05
Delete
Info
New Timer Programme
MON 07.01
MON 07.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
MON 07.01
TUE 01.01
DR
HG
DR
DR
OK
OK
e.g.,
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (> 34).
Displayed if timer recording of two
encrypted programmes is overlapping.
(When “Recording for Encrypted Channel”
is set to “Decrypt Recording” only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 101)
- programmes are deactivated, etc.
DMR-HCT230_130EG_eng.book 36 ページ 2013年7月8日 月曜日 午後5時42分
Playing back video
VQT5C33
37
Playing titles on the HDD
Playing
back video
Resume play function
If the following screen appears, select the point to
start playback.
§
“For recorded titles (> 8)” only
1 Press [FUNCTION MENU].
2 Select “Video” in “Contents on HDD”,
then press [OK].
e.g.,
1 Tab (> 38)
2 Programme type
[USB_HDD] When connecting registered
USB HDD, “USB HDD” tab and
registration number appears.
Select “USB HDD” tab.
e.g.,
3 Select the title, then press [OK].
Playback starts.
§
Time Remaining 45:54 (DR)
HDD
Page
Select
Grouped Titles DIRECT NAVIGATOR
OPTION
Start Time
Prog.Type:
Rec time
Play
RETURN
Social/Economic
Sport AVCHDMovieNot Viewed
Video Menu
Channel Date Title Name Titles
All
Delete
Page Up
Page Down
Movie
9:00 0:01(DR)

Time Remaining 45:54 (DR) Registration number 1
USB-HDD
Grouped Titles DIRECT NAVIGATO
R
Social/Economic
Sport
AVCHD
Movie
Not Viewed
Video Menu
All
USB HDD
Playback
Last Stopped
Beginning
Where do you want to start playback from ?
OK
RETURN
DIRECT NAVIGATOR screen
Screen icons
[ Currently recording programme
Protected title
Title was not recorded due to
recording protection
t
Title cannot be played
(When data is damaged etc.)
Title is copy protected (One
generation copy is permitted)
§
Title requires a CAM with a playback
licence to play back.
The number of times the title can
be played back may also be limited.
§
Title cannot be played back when a
certain time has elapsed after the
recording.
The icon turns grey after the
playback period has passed.
Playback period limit can be
checked in the information of that
title. (> 38, Showing Information)
§
Title is copy restricted.
§
Title requires a CAM with a playback
licence to play back. If a certain time
has elapsed after the recording, the
title cannot be played back.
The number of times the title can
be played back may also be limited.
Encrypted title
Title has failed to be decrypted
Press [STATUS ] to show the
reason of the failure.
(Gray)
Title cannot be played back, edited
(except deleting) or copied.
Delete the title. (> 45)
Grouped titles
Title has not yet been played
DMR-HCT230_130EG_eng.book 37 ページ 2013年7月8日 月曜日 午後5時42分
Playing back video
VQT5C33
38
Playing titles on the HDD
§
Title cannot be edited (except deleting) or
copied.
Titles will be categorised automatically.
You can quickly find the recorded titles by
selecting the tab.
To select the tab
Press [2, 1].
To change the displayed programme type tab
1 Select the programme type, then press the
green button.
2 Select the item, then press [OK].
Select the title, then press [STATUS ].
1 On the Grouped Titles screen:
Select the item marked with .
Title is recorded using a different
encoding system from that of the
unit.
Change the “TV System” (> 73, 80).
Radio programme
3D contents
This icon will not display even with
3D programmes when a broadcast
programme is recorded.
Recorded in 1080/50p contents
Recorded in 1080/60p contents
Title has a rating level set by the
CAM.
Title is restricted by Child Lock List or
Parental Rating (> 77).
Recording did not complete as the
timer recording has started.
Tab
&
Showing Information
Switching the appearance
1 Press [OPTION].
2 Select “Grouped Titles” or “All Titles”, then
press [OK].
Grouped Titles:
Two or more titles recorded in the daily/weekly
timer recording mode are bundled and
displayed as one item.
All Titles:
Displays all titles.
Playing back grouped titles
2 When playing all titles:
Press [PLAY/a1.3 1].
This function cannot be used if the group includes any
encrypted title ( ).
When playing the individual title:
Press [OK] and select the title, then press
[OK].
DMR-HCT230_130EG_eng.book 38 ページ 2013年7月8日 月曜日 午後5時42分
Playing back video
VQT5C33
39
1 Select the group, then press [OPTION].
2 Select “Edit”, then press [OK].
3 Select “Enter Title Name”, then press [OK].
4 Refer to “Entering text”. (> 87)
To edit the chapter in Chapter View
Refer to “Editing chapters”. (> 49)
Editing the grouped titles
1 Select the title or the group, then press the
yellow button.
A check mark is displayed. Repeat this step.
Press the yellow button again to cancel.
If you perform “Remove”, select the title in
the group.
2 Press [OPTION].
3 Select the item, then press [OK].
Create Group:
Selected titles are bundled to form a group.
Select “Create”, then press [OK].
Release Grouping:
All the titles in the group are released.
Select “Release”, then press [OK].
Remove:
Selected titles are removed from the group.
Select “Remove”, then press [OK].
Changing the group name
Playback from Chapter View
Regarding chapters
You can divide a title into multiple chapters. Each
section between the division points (Chapter
Marks) becomes a chapter.
Chapter Creation
This unit can create chapters automatically
while recording broadcasting. (> 78)
If the title is recorded in the encrypted form, the chapter
will be created only after the title is decrypted.
1 Select the title, then press [OPTION].
2 Select “Chapter View”, then press [OK].
e.g., [HDD]
3 Select the chapter, then press [OK].
Chapter
Title
Chapter Marks
Press OK to start playing from
the selected chapter.
Selected chapter can be edited
via OPTION.
Press RETURN to go back to
previous menu.
Page 001/001
0:00.00
001
0:12.29
Play
SelectEdit Chapter Mark
OK
RETURN
OPTION
Delete
DMR-HCT230_130EG_eng.book 39 ページ 2013年7月8日 月曜日 午後5時42分
Playing back video
VQT5C33
40
Playing titles on the media
Some files may not be played back, depending on the video
resolution and frame rate condition.
Selecting screen for each operation is displayed
when the media is inserted, and you can access
the operation screen easily.
e.g., [USB]
Display items differ depending on what is
recorded in each media.
If the menu screen is not displayed, display it
by performing the following operation.
1 While stopped
Press [FUNCTION MENU].
2 Select “Media”, then press [OK].
3 Select the media, then press [OK].
e.g.,
Screen icons:
[SD]
e.g.,
Showing Information
1 Select the title, then press [OPTION].
2 Select “Information”, then press [OK].
About screen icons
Refer to “Screen icons”. (> 37)
§
“For data files (> 8)” only
1 Insert the media.
Depending on the type of the media, play
starts from the specified position, or the
screen appears.
2 When the menu screen etc., appears:
Select the item or title, then press [OK].
Repeat this step if necessary.
Playback starts.
Menu screen
§
USB
OK
RETURN
USB device is inserted.
View Photos
Play Video
Play / Copy Music ( MP3 )
Copy Video ( AVCHD )
Copy New Photos
Video list screen
Folder
Titles
Move to the parent folder
Video Menu ( AVCHD ) screen
OK
RETURN
Page 0001 / 0003
Parent Folder
Videos \ Video \USB
Folder 01
Folder 02
video01.mkv
video02.mkv
video03.mkv
video04.mkv
Page Up
Page Down
Video Menu ( AVCHD )
RETURN
Date Day
Time
Title Name
Rec time
0:30.41
Page 03/03
OPTION
Page Up
Page Down
No.
01.01 5:00 Birds
02.01 9:30 World news
03.01 10:00 Football
03.01 11:30 House dog
04.01 2:00 Hunting
05.01 11:00 Shopping
05.01 10:00 Venus
06.01 3:45 Kitten
06.01 9:00 Moon
01.01
SUN
MON
TUE
TUE
WED
THU
THU
FRI
FRI
SUN 9:00 Dogs and Cats
OK
SD Card
001
002
003
004
005
006
007
008
009
010
DMR-HCT230_130EG_eng.book 40 ページ 2013年7月8日 月曜日 午後5時42分
Playing back video
VQT5C33
41
Operation during play
Depending on the media and the type of file, some
operations may not be possible.
Depending on the media, it may take time for the menu
screen, pictures, sound, etc. to start.
Press [STATUS ] twice.
e.g.,
Press [STOP ].
Press and hold [PLAY/a1.3 1].
Press again to return to normal speed.
Xvid, MKV, MP4 and MPEG2: Quick View is not effective.
Quick View may not work when recording in XP mode.
Quick View cannot be used on encrypted titles ( ).
Press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
•Press [PLAY/a1.3 1] to restart play.
The speed increases up to 5 steps.
Xvid, MKV, MP4 and MPEG2: Audio is not heard during all
levels search.
Press [PAUSE ;].
•Press [PLAY/a1.3 1] to restart play.
While paused, press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
•Press [PLAY/a1.3 1] to restart play.
The speed increases up to 5 steps.
Xvid, MKV, MP4 and MPEG2: Slow-motion is not effective.
AVCHD ([SD]): Forward direction [SLOW/SEARCH 5]
only.
Slow-motion cannot be used on encrypted titles ( ).
General operations
Status messages
Stop
Resume play function
Press [PLAY/a1.3 1] to restart from the stopped
position.
8:05:50 01.01.2013
T1 0:05.14 DR
0:30.00
Remain HDD
Quick View
Search
Pause
Slow-motion
DMR-HCT230_130EG_eng.book 41 ページ 2013年7月8日 月曜日 午後5時42分
Playing back video
VQT5C33
42
Operation during play
While paused, press [2](2;) or [1](;1).
Each press shows the next frame.
Press and hold to change in succession forward
or backward.
•Press [PLAY/a1.3 1] to restart play.
Xvid, MKV, MP4 and MPEG2: Frame-by-frame is not
effective.
AVCHD ([SD]): Forward direction [1](;1) only.
Frame-by-frame cannot be used on encrypted titles ( ).
Skip forward 1 minute:
Press [MANUAL SKIP +60s].
Skip backward 10 seconds:
Press [MANUAL SKIP -10s].
Xvid and MKV: Manual Skip is not effective.
1 Press [TIME SLIP].
2 Select the time with [3, 4].
Press and hold [3, 4] to change the time by
10-minute.
3 Press [OK].
Play skips the specified time.
Xvid, MKV, AVCHD, MP4 and MPEG2: [TIME SLIP] is not
effective.
Press [SKIP :] or [SKIP 9].
[HDD] [USB_HDD] (For recorded titles, > 8): It will not skip
the title. But the title in the grouped titles will be skipped.
(> 38)
[SKIP 9] is not effective for encrypted titles ( ).
[HDD] [USB_ HDD] (For recorded titles, > 8)
During the playback or pause
Press [CHAPTER].
[HDD] [USB_ HDD] (For recorded titles, > 8)
1 While paused
Press [SKIP :] or [SKIP 9] and skip to
the location you want to delete.
2 Press [CHAPTER].
3 Select “Yes”, then press [OK].
Frame-by-frame
Manual Skip
Skipping the specified time
Skipping the title or chapter
To create Chapter Marks
To delete the Chapter Mark
DMR-HCT230_130EG_eng.book 42 ページ 2013年7月8日 月曜日 午後5時42分
Playing back video
VQT5C33
43
Press [AUDIO].
It will switch depending on the contents
recorded every time it is pressed.
[HDD] [USB_HDD] (For recorded titles, > 8):
1 Press [STTL ].
2 Press [OK].
3 Select “On” or “Off”, then press [OK].
If you want to switch the subtitle language,
select it in the Basic Operation menu (> 71).
Xvid and MKV:
Display with “Subtitle Settings” in the Basic
Operation menu (> 71).
Xvid and MKV: If the subtitles text are not displayed
correctly, try changing the language settings (> 78, Subtitle
Text ) .
[HDD] [USB_HDD] (For recorded titles, > 8)
Press [TEXT ].
Teletext display mode is TOP (FLOF) only.
Some functions may not work.
Teletext cannot be displayed when the subtitles are set to
ON.
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 88)
Preparation
Connect 3D compatible TV to this unit. (> 14)
Perform the necessary preparations for the TV.
Play back following the instructions displayed
on the screen.
Perform the following settings as necessary.
3D Type
If 3D video cannot be played back in 3D, you may
be able to play it in 3D by changing the setting.
(> 73, 80)
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video and
cannot be played back correctly, you may be able
to play it by changing the setting. (> 73, 80)
3D Playback Message
Hide the 3D viewing warning screen. (> 73, 80)
Changing audio
Switching subtitles
Displaying the Teletext
Aspect
3D video playback
Preparatory 3D settings
DMR-HCT230_130EG_eng.book 43 ページ 2013年7月8日 月曜日 午後5時42分
Playing back video
VQT5C33
44
Operation during play
Change this setting when the screen is not
correctly displayed for 3D compatible
programmes.
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
3 Select “3D Settings”, then press [OK].
4 Select the item, then press [OK].
Signal Format
- Original:
Keep original picture format.
- Side by side:
3D picture format comprising of left and right
screens.
-2D to 3D:
Converts 2D pictures to 3D effect while playing.
3D Picture Mode
-Normal:
Normal 3D effects.
-Soft:
Soft 3D effects.
This function cannot be enabled when “Signal
Format” is set to “2D to 3D”.
- Manual:
3D effects set manually (> below)
Graphic Display Level
Adjust the 3D position for the playback menu or
message screen etc. (> 72)
Depending on the contents, displayed items are different.
This unit only guarantees the playback of the Frame
Sequential and the Side-by-Side (Half) programme types.
Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other
discomfort while viewing 3D images, discontinue use and
rest your eyes.
Depending on the connected TV, the video being played
back might switch to 2D video due to changes in resolution
etc. Check the 3D setting on the TV.
3D video might not output the way it is set in “HDMI Video
Format” (> 80).
It may display as Side-by-Side when playback of the 3D
video is started.
3D settings during playback
Manual Settings
(To change the setting, set “3D Picture Mode” to
“Manual”.)
Distance
Set the amount of depth perception.
Screen Type
Selects how the screen appears during 3D
playback (flat or round).
Frame Width
Set the amount of feathering at the edge of
screen.
Frame Colour
Set the colour of feathering at the edge of
screen.
DMR-HCT230_130EG_eng.book 44 ページ 2013年7月8日 月曜日 午後5時42分
Editing video
VQT5C33
45
Deleting/Editing recorded titles
Editing video
Once deleted, divided or partially deleted,
recorded content cannot be restored to its
original state. Make certain before proceeding.
§
“For recorded titles (> 8)” only
PIN is required to edit the titles with in some functions.
(> 38)
1 On the DIRECT NAVIGATOR screen:
Select the title.
2 Press [DEL].
3 Select “Delete”, then press [OK].
Multiple deleting
Select the title, then press the yellow button in
step 1.
A check mark is displayed. Repeat this step.
Press the yellow button again to cancel.
1 Press [DEL] while playing.
2 Select “Delete”, then press [OK].
Even after deletion is completed, it may take time until the
updated available space is displayed.
If the title is contents protected, you may not
perform editing other than deleting. (> 13)
1 On the DIRECT NAVIGATOR screen:
Select the title.
2 Press [OPTION].
Multiple editing
Select the title, then press the yellow button in
step 1.
A check mark is displayed. Repeat this step.
Press the yellow button again to cancel.
Deleting
Deleting during play
§
Time Remaining 45:54 (DR)
HDD
Page
Select
Grouped Titles DIRECT NAVIGATOR
OPTION
Start Time
Prog.Type:
Rec time
Play
RETURN
Social/Economic Sport AVCHDMovieNot Viewed
Video Menu
Channel Date Title Name Titles
All
Delete
Page Up
Page Down
Movie
9:00 0:01(DR)
Start Time
Prog.Type:
Rec time
Channel Date Title Name
Movie
9:00
Editing
3 Select the item, then press [OK].
e.g.,
“Edit” has several functions.
Time Remaining 45:54 (DR)
HDD
Page
Select
Grouped Titles DIRECT NAVIGATOR
OPTION
Start Time
Prog.Type:
Rec time
Play
RETURN
Social/Economic Sport AVCHDMovieNot Viewed
Video Menu
Channel Date Title Name Titles
All
Delete
Page Up
Page Down
Movie
9:00 0:01(DR)
Set up Protection
Cancel Protection
Partial Delete
Divide Title
File Conversion
Enter Title Name
Delete Title
Playback
Information
Chapter View
Create Group
Release Grouping
Edit
All Titles
File Decryption
DMR-HCT230_130EG_eng.book 45 ページ 2013年7月8日 月曜日 午後5時42分
Editing video
VQT5C33
46
Deleting/Editing recorded titles
1 Select “Delete Title”, then press [OK].
2 Select “Delete”, then press [OK].
1 Select “Enter Title Name” in “Edit”, then press
[OK].
2 Refer to “Entering text”. (> 87)
Protection setting prevents the title from
accidental deletion.
This function cannot be used on encrypted titles ( ).
This function cannot be used on encrypted titles ( ).
To confirm the division point
After performing step 2.
Select “Preview”, then press [OK].
The unit plays 10 seconds before and after the
division point.
To change the division point
After performing step 2.
Restart play and select “Divide”, then press [OK]
at the division point.
Divided titles will become a group of titles.
This function cannot be used on encrypted titles ( ).
Deleting
Entering title name
Setting protection
1 Select “Set up Protection” or “Cancel
Protection” in “Edit”, then press [OK].
2 Select “Yes”, then press [OK].
appears when setting the protection.
Start Time
Prog.Type:
Rec time
Social/Economic
MovieNot Viewed
Channel Date Title Name
All
Movie
9:00
Partial deleting
1 Select “Partial Delete” in “Edit”, then press
[OK].
2 Press [OK] at the start point and end point to
delete.
You can find the desired point by using play,
search, etc. (> 41)
3 Select “Continue”, then press [OK].
Select “Next”, then press [OK] to delete other
sections. Up to 20 sections can be set.
(> go to step 2)
4 Select “Delete”, then press [OK].
Chapter Mark is generated in the scene that
was partially deleted.
5 Press [RETURN ].
Dividing title
1 Select “Divide Title” in “Edit”, then press [OK].
2 Press [OK] at the point to divide the title.
You can find the desired point by using play,
search, etc. (> 41)
3 Select “Continue”, then press [OK].
4 Select “Divide”, then press [OK].
DMR-HCT230_130EG_eng.book 46 ページ 2013年7月8日 月曜日 午後5時42分
Editing video
VQT5C33
47
File Conversion is a function to convert the
recording mode of the title in DR mode and
AVCHD contents. The size of the converted title
will be small regularly. It will take about the same
time as the recorded duration.
To cancel a “Now” conversion
Press and hold [RETURN ] for more than
3 seconds.
To confirm whether the conversion is
completed
Press [DIRECT NAVIGATOR].
e.g.,
When “±± > ±± (Recording mode for
conversion)” is displayed, the conversion has not
finished.
File Conversion
1 Select “File Conversion” in “Edit”, then press
[OK].
e.g.,
2 Set the conversion options, then press [OK].
Recording Mode (> 7):
[USB_HDD] You cannot select XP, SP, LP and
EP mode.
Subtitles:
•Automatic
Subtitles will be recorded if they are included
in the title, and will not be recorded if they are
not included.
•Off
Subtitle will not be recorded.
Timing:
•Now
Conversion begins immediately after step 4.
Timer recording will not be performed
during conversion.
If an encrypted title ( ) is included, “Now”
cannot be selected.
During standby
Conversion will be performed after the unit is
switched to standby mode.
File Conversion
Convert the selected title by changing its recording mode.
Please select recording mode and other options, then press OK.
RETURN
Subtitles
Off
Recording Mode
HL -- Longer Play
Timing
During standby
OK
3 Select the item, then press [OK].
Convert & Delete:
The original title will be deleted to save HDD
capacity after conversion.
Convert Only:
The original title remains after conversion.
The original title will be deleted after File
Conversion, if the selected title is indicated
with . (> 13)
4 “Now” conversion:
Select “Start”, then press [OK].
“During standby” conversion:
Press [OK].
Conversion will be performed after the unit is
switched to standby mode.
“COPY” or “CONV” on the unit’s display
remains lighted during conversion.
If the title is encrypted ( ), conversion
will start after decryption.
Start Time
Prog.Type:
Rec time
Channel Date Title Name Titles
Movie
9:00
0:01(DR HL)
04.10
04.10
29.10
29.10
DMR-HCT230_130EG_eng.book 47 ページ 2013年7月8日 月曜日 午後5時42分
Editing video
VQT5C33
48
Deleting/Editing recorded titles
To cancel a “During standby” conversion
After performing steps 1–3 (> 45, Editing)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
To use “File Conversion”, the HDD needs enough storage
capacity.
The size of converted title might increase depending on the
title.
Teletext will not be recorded.
File Conversion is stopped when this unit is turned on
during performing “During standby” conversion. Conversion
will start from the beginning again once the unit is switched
to standby mode.
When converted, the audio content and subtitle language
will be selected according to the following settings:
- “Multi Audio” of “Preferred Language” (> 77)
- “Subtitles” of “Preferred Language” (> 77)
- Audio for HG / HX / HE / HL / HM Recording (> 79)
When converted, 3D information may not be retained.
In titles with the Auto Renewal Recording function (> 34)
set, a programme may be unintentionally converted while in
“During standby”.
[HDD]
Encrypted titles ( ) can be decrypted manually.
To cancel the decryption
Press and hold [RETURN ] for more than
3 seconds.
For decryption, the CI module that supports the programme
is necessary.
Depending on the programme, playback/decryption may
not be possible.
During decryption, do not remove the CI module from this
unit.
File Decryption
1 Select “File Decryption” in “Edit”, then press
[OK].
2 Select whether to delete the original title or
not, then press [OK].
•Yes
The original title will be deleted to save HDD
capacity after decryption.
•No
The original title remains after decryption.
3 Select “Start”, then press [OK].
Decryption starts.
“Decrypting” appears during decryption.
When a title that is copy protected (One
generation copy is permitted) is selected, the
original title will be deleted after decryption.
(> 13)
When a decryption fails, the screen icon
( ) is changed to .
DMR-HCT230_130EG_eng.book 48 ページ 2013年7月8日 月曜日 午後5時42分
Editing video
VQT5C33
49
1 Select “Chapter View”, then press [OK].
2 Perform the editing operations.
Playback from Chapter View
Refer to “Playback from Chapter View”. (> 39)
The maximum number of chapters:
(Depends on the state of recording.)
Approx. 1000 per title
When the title has the maximum number of chapters, you
cannot perform the Resume play function (> 37) with the
title.
This function cannot be used on encrypted titles ( ).
Editing chapters
Edit Chapter Mark:
Select the point where you want to start a new
chapter while viewing the title.
1 Press the green button.
2 Press [OK] at the point you want to divide.
Repeat this step.
3 Press [RETURN ] to go to Chapter View
screen.
To delete the chapter:
1 Select the chapter, then press [DEL].
Multiple editing
Select the chapter, then press the yellow
button.
A check mark is displayed. Repeat this
step.
Press the yellow button again to cancel.
2 Select “Delete”, then press [OK].
To combine chapters (Delete chapter
mark):
1 Select the chapter, then press [OPTION].
2 Select “Combine Chapters”, then press
[OK].
3 Select “Combine”, then press [OK].
The selected chapter is combined to the
next chapter.
DMR-HCT230_130EG_eng.book 49 ページ 2013年7月8日 月曜日 午後5時42分
Copying video
VQT5C33
50
Copying titles
Copying video
To register the external HDD (USB HDD)
Refer to “Registering the USB HDD”. (> 69)
Encrypted titles ( ) cannot be copied. (> 31)
During copying, do not remove the CI module from this unit.
You cannot copy the following titles to the USB HDD.
- Protected titles
- HD Video (AVCHD)
§1
“For recorded titles (> 8)” only
§2
The title in the source media will be deleted.
§3
The recording mode cannot be changed.
1 Connect the USB HDD.
2 Press [FUNCTION MENU].
3 Select “Video” in “Contents on HDD”,
then press [OK].
4 Select the title, then press the yellow
button.
A check mark is displayed. Repeat this
step.
Press the yellow button again to cancel.
5 Press the blue button.
6 Select “Yes”, then press [OK].
If you select “No”, you can change the
selection. (> 51, To change the selection)
§1, 2, 3
Start Time
Prog.Type:
Rec time
Channel Date Title Name
Movie
9:00
7 Set other settings, then press [OK].
e.g.,
(> 51, Setting the copying options)
8 Select “Yes”, then press [OK].
Standby status can be changed if required.
Please press OK to start copying.
OK
RETURN
Automatic Standby after Copy
Off
DMR-HCT230_130EG_eng.book 50 ページ 2013年7月8日 月曜日 午後5時42分
Copying video
VQT5C33
51
2 Select the title, then press the yellow button.
Repeat this step to select titles.
3 Press the blue button.
4 Go to step 6. (> 50)
Screen icon
About screen icons on the DIRECT
NAVIGATOR
Refer to “Screen icons”. (> 37)
1 Select the item in step 7 (> 50).
2 Press [2, 1] to change the settings.
§1
“For recorded titles (> 8)” only
§2
The title in the source media will be deleted.
§3
The recording mode cannot be changed.
To change the selection
1 Select “No”, then press [OK] in step 6 (> 50).
Titles that cannot be copied
Setting the copying options
Automatic Standby after Copy
On:
This unit is turned to standby mode when it is
not operated for approximately 5 minutes
after completing copy.
Copying titles with copying list
[HDD] ,.
[USB_HDD]
§1, 2, 3
1 1 Press [FUNCTION MENU].
2 Select “Copy Video”, then press [OK].
2 Set the copy direction.
1 Select “Copy Direction”, then press
[1] (right).
2 Set “Source” and “Destination”.
3 Press [2].
Copy
HDD
USB HDD
1
2
3
Source
Destination
Cancel All
Copy Direction
Copy Mode
Create List
Start Copying
HDD USB HDD
High Speed
Select the copy direction.
RETURN
0
When a title is copied from HDD to
USB HDD, the title on the list will be
deleted from HDD after copy is completed.
DMR-HCT230_130EG_eng.book 51 ページ 2013年7月8日 月曜日 午後5時42分
Copying video
VQT5C33
52
Copying titles
1 Press [OPTION].
2 Select the item, then press [OK].
4 Select “Start Copying”, then press [OK].
5 Select “Yes”, then press [OK].
To cancel all registered copying settings and
lists
After performing step 1
1 Select “Cancel All”, then press [OK].
2 Select “Yes”, then press [OK].
Encrypted titles ( ) cannot be copied. (> 31)
Titles in the grouped titles and other titles cannot be
registered simultaneously.
3 Register titles for copy.
1 Select “Create List”, then press
[1] (right).
2 Select “New item”, then press [OK].
3 Select the title, then press the yellow
button.
Repeat this step to select titles.
e.g., [HDD]
To change the appearance of the list
or show information of the title
The titles will be copied in the order of the
copying list. If you want to specify the order, edit
the copying list after the titles are selected.
(> 53, Editing the copying list)
4 Press [OK].
5 Press [2].
Data size of each registered title
Size:
Data size recorded to
the copy destination
RETURN
Time
Rec time
Size 1360 MB
0:30 (DR)
9:00
Page
Select
OPTION
Page Up
Page Down
HDD
OK
001/003
Create List Grouped Titles
01.01
15:00
1
02.01
9:30
1
03.01
10:00
1
03.01
18:30
1
04.01
2:00
1
05.01
11:0 0
1
05.01
15:00
1
06.01
3:45
1
06.01
9:00
1
01.01
9:00
1
Date Channel
Time
Title Name
Titles
Page 01/01
Size:
Destination Capacity:
No. Size
New item (Total=0)
Title
( 0% )
0 MB
3200 MB
DMR-HCT230_130EG_eng.book 52 ページ 2013年7月8日 月曜日 午後5時42分
Copying video
VQT5C33
53
1 Select the title after step 3 (> 52).
2 Press [OPTION].
3 Select the item, then press [OK].
When copying at normal speed, the total data size will
change according to the recording mode.
The total data size shown may be larger than the sum of the
data sizes for each registered item.
About other screen icons
Refer to “Screen icons”. (> 37)
Editing the copying list
Delete All:
All titles that you registered to copy are
deleted.
Select “Yes”, then press [OK].
Add:
Add new items to the copying list.
1 Select the titles with the yellow button.
2 Press [OK].
Delete:
Selected titles are deleted.
Select the title, then press the yellow button
before step 2.
Repeat this step to select titles.
Select “Yes”, then press [OK].
Move:
Change the order of items on the copying list.
Select the title to move before step 2.
Select the destination, then press [OK].
Copy
1
2
3
Cancel All
Copy Direction
Copy Mode
Create List
Start Copying
HDD USB HDD
High Speed
Create copy list.
2
Page 01/01
Size:
Destination Capacity:
No. Size
New item (Total=2)
Title
( 50% )
MB
MB
OPTION
01
0:30 DR (25%)
0:30 DR (25%)
02
RETURN
OK
Screen icons
Titles that cannot be copied
(NTSC)
(PAL)
Title recorded using a different
encoding system from that of the
unit.
Titles displaying these marks
cannot be selected.
DMR-HCT230_130EG_eng.book 53 ページ 2013年7月8日 月曜日 午後5時42分
Photo and Music
VQT5C33
54
Playing photos
Photo and Music
To exit the Calendar screen
Press [PAUSE ;].
When there are many files and/or folders, some files may
not be displayed or not be playable. (> 101)
Folder
Photos imported to the HDD (> 57) are
managed using folders.
Folders and photos can be edited by pressing
[OPTION]. (> 56)
§
“For data files (> 8)” only
In order to play back 3D photo (MPO), this unit
should be connected to a Full HD 3D
compatible TV.
1 [HDD]
1 Press [FUNCTION MENU].
2 Select “Photo” in “Contents on HDD”,
then press [OK].
[USB_HDD] [SD] [USB]
1 Insert or connect the media.
The menu screen appears. (> 40)
2 Select “View Photos”, then press
[OK].
2 Select the folder, then press [OK].
e.g., [HDD]
To select the tab
Press [2, 1].
Start Slideshow
Refer to “Slideshow settings”. (> 55)
Switching to the Calendar screen
Press [PAUSE ;].
3 Select the photo, then press [OK].
•Press [2, 1] to display the previous or
next photo.
§
HDD
Page
SelectSlideshow
Calendar
OPTION
03.01.2012
29.10.2012
25.02.2013
15.03.2013
0002/0002
Copy
OK
RETURN
8
12
18
4
Photo Menu
All
3D
Page Up
Page Down
CH
Tab
Photo Menu screen
Screen icons
3D
(Tab)
3D photos (MPO) are automatically
sorted. Select from this tab to play
back in 3D. (It will play back in 2D
when selected from other tabs.)
Photo protected
New photo which is stored and not
viewed
HDD
Page
SelectSlideshow
Calendar
OPTION
03.01.2012
29.10.2012
25.02.2013
15.03.2013
0002/0002
Copy
OK
RETURN
8
12
18
4
Photo Menu
All
3D
Page Up
Page Down
CH
e.g., [HDD]
DMR-HCT230_130EG_eng.book 54 ページ 2013年7月8日 月曜日 午後5時42分
Photo and Music
VQT5C33
55
1 While displaying a photo:
Press [OPTION].
2 Select the item, then press [OK].
1 On the Photo Menu screen:
Press the green button.
2 Select the item, then press [OK].
To pause the Slideshow
Press [PAUSE ;].
•Press [PAUSE;] again to restart.
To stop the Slideshow
Press [RETURN ].
Photo play option
Aspect
You can switch the screen mode. (> 88)
Graphic Display Level
You can change the 3D position of the
screen display, etc., during the 3D photo
playback.
Photo Menu
•Start Slideshow
You can start a slideshow.
Rotate RIGHT/Rotate LEFT
e.g.,
The information of the rotated photos will
not be stored depending on the media.
This function is not available during the
3D photo playback.
Information
Information (shooting date etc.) is shown.
Wallpaper
A photo being played back is registered as
wallpaper on the FUNCTION MENU
screen. (> 23)
Slideshow settings
Start Slideshow
You can start a slideshow.
Interval
You can set up the time until the next photo
is to display.
Transition Effect
§
Effect for the next photo to display can be
set.
Repeat Play
You can set up to play back repeatedly.
Music Selection
§
You can select background music on (either
from HDD or USB) or off.
Background Music
§
You can select background music from HDD
(My Favourites or Playlists) or USB (Folder).
Random BGM
§
You can play back the BGM (Background
Music) in random order.
§
This function is not available during the
3D photo playback.
Slideshow
OK
RETURN
Start Slideshow
Interval
Transition Effect
Repeat Play
Normal
Fade
On
Music Selection
No background music
Background Music
No List
Random BGM
Off
DMR-HCT230_130EG_eng.book 55 ページ 2013年7月8日 月曜日 午後5時42分
Photo and Music
VQT5C33
56
Editing photos
2 Press [OPTION].
Selectable items will change depending on
the media and the type of file.
3 Select the item, then press [OK].
1 On the Photo Menu screen:
To edit the folder:
Select the folder.
To edit the photo:
1 Select the folder, then press [OK].
2 Select the photo to edit.
To select multiple folders or photos
Press the yellow button when selecting the
folder or photo.
A check mark is displayed. Repeat this
step.
Press the yellow button again to cancel.
e.g., [HDD]
HDD
Page
SelectSlideshow
Calendar
OPTION
03.01.2012
29.10.2012
25.02.2013
15.03.2013
0002/0002
Copy
OK
RETURN
8
12
18
4
Photo Menu
All
3D
Page Up
Page Down
CH
Enter Folder Name
Refer to “Entering text”. (> 87)
Combine Folders
[HDD]
Select “Yes”, then press [OK].
Delete Folder
Select “Yes”, then press [OK].
Move Photos
[HDD]
Select “Move to new folder” or “Move to
another folder”, then press [OK].
If “Move to another folder” is selected, set a
destination folder.
Delete Photos
Select “Yes”, then press [OK].
Set up Protection
[SD]
Select “Yes”, then press [OK].
appears when the protection is set.
Even if the protection is set, the photo may
be deleted by another unit.
Cancel Protection
[SD]
Select “Yes”, then press [OK].
Photos For Music
[HDD]
Select “Yes”, then press [OK].
DMR-HCT230_130EG_eng.book 56 ページ 2013年7月8日 月曜日 午後5時42分
Photo and Music
VQT5C33
57
Copying photos
§
“For data files (> 8)” only (JPEG, MPO)
To stop copying
Press and hold [RETURN ] for 3 seconds.
The name of the copied photos will be changed.
If the number of files/folders to be copied exceeds the
maximum (> 101), copying will stop partway through.
Newly added photos will automatically be copied
to the HDD.
4 Once the copy is completed, select “Yes” or
“No”, then press [OK].
To stop copying
Press and hold [RETURN ] for 3 seconds.
Photos without shooting date will be categorised using the
creation date.
If the space on the destination drive runs out or the number
of files/folders to be copied exceeds the maximum (> 101),
copying will stop partway through.
The name of the copied photos will be changed.
Selecting and copying the photos
[HDD] > [SD]
[USB_HDD] [SD] [USB] > [HDD]
1 On the Photo Menu screen:
To copy the folder:
Select the folder, then press the blue button.
To copy the photo:
1 Select the folder, then press [OK].
2 Select the photos to copy, then press the
blue button.
To select multiple folders or photos
Press the yellow button when selecting the
folder or photo.
A check mark is displayed. Repeat this
step.
Press the yellow button again to cancel.
2 Select “Yes”, then press [OK].
Copying starts.
§
Copying automatically
[USB_HDD] [SD] [USB] > [HDD]
1 Insert the media.
The menu screen appears. (> 40)
2 Select “Copy New Photos”, then press [OK].
e.g., [SD]
3 Select “Yes”, then press [OK].
Copying starts.
Yes No
Start copying ?
Copy New Photos
OK
RETURN
HDDSD card
DMR-HCT230_130EG_eng.book 57 ページ 2013年7月8日 月曜日 午後5時42分
Photo and Music
VQT5C33
58
Playing music
To play other music (track)
Select the item, then press [OK].
The track/artist name will be displayed if the information is
contained in ID3 tag of the MP3 file.
If there is a large amount of photo data etc. within a MP3
file, play may not be possible.
[USB_HDD] [USB] > [HDD]
After performing steps 1–2 (> left)
1 Press the blue button.
2 Select “Copy”, then press [OK].
To stop copying
Press and hold [RETURN ] for 3 seconds.
While copying, no other operations can be performed.
Timer recordings will not proceed.
All tracks in the folder will be copied.
Tracks recorded to HDD in one operation will be regarded
as one album.
§
“For data files (> 8)” only (MP3)
1 Insert or connect the media.
The menu screen appears. (> 40)
2 Select “Play / Copy Music ( MP3 )”, then
press [OK].
Playback will start.
Using the tree screen to find a folder
1 Press [OPTION].
2 Select “Select Folder”, then press [OK].
3 Select the folder, then press [OK].
§
Music Menu
No.
Track Name
Track List
0001
0002
0003
0004
0005
USB ( MP3 )
Copying music (MP3) to HDD
DMR-HCT230_130EG_eng.book 58 ページ 2013年7月8日 月曜日 午後5時42分
Photo and Music
VQT5C33
59
[HDD]
1 Press [FUNCTION MENU].
2 Select “Music” in “Contents on HDD”, then
press [OK].
3 Select the item, then press [OK].
On the track list screen:
1 Select the track, then press [OPTION].
2 Select “Information”, then press [OK].
Playing music recorded on HDD
Artists
1 Press [2, 1] to select the initial of the
artist.
2 Select the name of the artist, then press
[OK].
3 Select the album, then press [OK].
4 Select the track, then press [OK].
Albums
1 Press [2, 1] to select the initial of the
album.
2 Select the album, then press [OK].
3 Select the track, then press [OK].
My Favourites
Tracks registered in “My Favourites”.
Select the track, then press [OK].
Registering a track to the “My Favourites”.
(Up to 99 tracks)
While the track list screen is displayed:
Select the track, then press the green
button.
Music Menu
OK
RETURN
Please select to access music.
Artists
Frequently Played
Albums
Total Tracks 53
HDD
Random Play
My Favourites
OPTION
Playlists
Playlists
1 Select the playlist, then press [OK].
2 Select the track, then press [OK].
Frequently Played
Tracks most often played recently (up to
30 tracks).
Select the track, then press [OK].
Random Play
Random playback of all tracks.
Playback starts.
Showing Track Information
DMR-HCT230_130EG_eng.book 59 ページ 2013年7月8日 月曜日 午後5時42分
Photo and Music
VQT5C33
60
Playing music
[HDD] [USB_HDD] [USB]
Press [STOP ].
Press [PAUSE ;].
•Press [PLAY/a1.3 1] to restart play.
Press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
•Press [PLAY/a1.3 1] to restart play.
Press [SKIP :] or [SKIP 9].
Refer to “Repeat Play” or “Random” in Basic
Operation menu (> 71).
Refer to “Sound Effects” in Sound Settings menu
(> 72).
Photos can be displayed during music playback.
While playing the music
Press the red button.
To end the screen saver
Press [RETURN ].
To play music continuously even if the Power
off link works
Refer to “Playing music continuously even after
turning off power to the TV”. (> 70)
Operations during music play
Stop
Pause
Search
Skip
Repeat Play/Random
Sound Effects
Displaying photos (Screen Saver)
To select the photos to display
The original photo stored in the HDD by default
or a folder registered with “Photos For Music”
(> 56) can be selected.
(3D photos in the folder are played back in 2D.)
1 While screen saver is displayed
Press [OPTION].
2 Select “Setting for Screen Saver”, then press
[OK].
3 Select the item, then press [OK].
e.g.,
Please select image or photo folder to be displayed during screen saver.
RETURN
OK
Setting for Screen Saver
Original Image
Screen Saver Photo Folder
DMR-HCT230_130EG_eng.book 60 ページ 2013年7月8日 月曜日 午後5時42分
Photo and Music
VQT5C33
61
Editing music/playlist
1 If the confirmation screen appears:
Select “Yes”, then press [OK].
2 Select “Delete”, then press [OK].
Select “Delete”, then press [OK].
Select “Delete”, then press [OK].
Refer to “Entering text” on page 87.
Select “Remove”, then press [OK].
Tracks themselves are not deleted from the
HDD.
Select “Clear”, then press [OK].
Tracks themselves are not deleted from the
HDD.
Select “Remove”, then press [OK].
Tracks themselves are not deleted from the
HDD.
You can register your favourite albums and tracks
into 10 preset playlists.
Select the playlist, then press [OK].
New playlist cannot be added.
Up to 999 tracks can be registered to each
playlist.
1 On the Music Menu screen:
Press [OPTION].
e.g.,
2 Select the item, then press [OK].
e.g., while selecting an Album
Editing operations will change depending
on the screen.
Music Menu
OK
RETURN
Please select to access music.
Artists
Frequently Played
Albums
Total Tracks 53
HDD
Random Play
My Favourites
OPTION
Playlists
Add to Playlist
Edit Album Name
Playback Settings
Delete Album
Delete All Tracks
Delete Album
Delete
Edit Album Name/Edit Track Name/Edit Artist
Name/Edit Playlist Name
Remove All Tracks
Clear My Favourites/Clear Frequently Played
Remove
Add to Playlist
DMR-HCT230_130EG_eng.book 61 ページ 2013年7月8日 月曜日 午後5時42分
Network
VQT5C33
62
Smart Home Networking (DLNA)
Network
Smart Home Networking (DLNA) allows you to
watch the contents and broadcasts on Server
equipment connected on the same network from
Client equipment.
This unit can be used both as Server and Client.
Additionally, if used as Client, this unit can also be
used as Media Renderer, which can be controlled
by a Smartphone, etc.
Preparation
Network connection (> 17, 21)
Perform Home Network settings of the DLNA
compatible equipment.
Some video or broadcasts cannot be enjoyed depending on
the DLNA (Client) compatible equipment, the condition of
this unit, or the file type.
Ensure that the router for your home network has adequate
security system to prevent unauthorized access.
You can watch broadcasts received by this unit
(Multiroom TV Streaming), videos and photos
saved on HDD of this unit on DLNA (Client)
compatible equipment.
For details regarding the connection and
operation of equipment connected via a network,
refer to their respective operating instructions.
§
DLNA function compatible software should be
installed.
Preparation
When DLNA (Server) Function is deactivated,
make the settings. (> 73, 83, Home Network
Settings)
2 Select the item, then press [OK].
The titles with access restriction (e.g., copy restriction)
signals sent from broadcasters are not available for this
function.
You cannot play back music from the playback equipment
(Client).
The DLNA compatible device that is to be connected to the
unit should be connected to the same hub or broadband
router as the unit.
Files not on the HDD cannot be played back.
Playing back 3D video recorded on this unit may not work
properly.
3D photos copied to this unit cannot be played back in 3D.
Editing is not possible.
For more details, refer to the following website
and the operating instructions for each item of
equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Using this unit as Server
1 Operate the playback equipment (Client) to
display the list of contents on this unit.
Refer to their respective operating
instructions.
This unit (Server)
DLNA compatible
equipment (Client)
§
DMR-HCT230_130EG_eng.book 62 ページ 2013年7月8日 月曜日 午後5時42分
Network
VQT5C33
63
You can share videos, photos and music stored in
the DLNA Certified media server (such as a PC
with Windows 7 installed etc.).
1 Press [FUNCTION MENU].
3 Select the equipment, then press [OK].
You may not be able to use the Control Panel even if you
use the Panasonic DLNA compatible equipment.
Depending on the contents and the connected equipment,
playback may not be possible.
Playlist of Windows Media
®
Player can play back only the
contents that are stored in the libraries.
While playing back the 3D programme, you cannot set “3D
Settings”. (> 44)
Items displayed in grey on the display cannot be played
back by this unit.
Depending on the performance of the connected PC, video
frames may be dropped during playback, or video may not
be played back at all. (> 95)
Using this unit as Client
2 Select “DLNA Client” in “Home Network”,
then press [OK].
A list of equipment connected via the
network is displayed.
This list can be updated by pressing the red
button.
4 Select the item, then press [OK].
Menu structure will be different depending
on the equipment. Select the contents by
repeating the operation.
Convenient functions can be used by
pressing [OPTION] depending on the
contents.
Control Panel
Control Panel is displayed once the
playback starts.
Operation can be performed with
[3, 4, 2, 1], [OK] and [EXIT ].
Press [OK] if the Control Panel is not
displayed.
(While paying video or photo) Press
[RETURN ] to hide the Control Panel.
This unit (Client)
DLNA compatible
equipment (Server)
DMR-HCT230_130EG_eng.book 63 ページ 2013年7月8日 月曜日 午後5時42分
Network
VQT5C33
64
Smart Home Networking (DLNA)
When this unit works as a DLNA client, following
contents are playable.
Video
§1
Only when the server is another DIGA.
§2
Recording mode in Panasonic Blu-ray Disc
recorder
Photo
§3
2D playback only.
Audio
Depending on the server, the contents other
than stated above can be played back.
This unit will work as Media Renderer, which
allows you to play back the contents on DLNA
Server by operating a Digital Media Controller (a
smartphone, etc.).
Possible applications:
§
Digital Media Controller compatible software
should be installed.
Following steps are necessary to use this unit as
Media Renderer.
1 Press [FUNCTION MENU].
2 Select “Media Renderer” in “Home Network”,
then press [OK].
3 Operate the Digital Media Controller
compatible equipment.
To exit from Home Network ( Media Renderer )
screen
Press [RETURN ].
Depending on the contents and the connected equipment,
playback may not be possible.
Items displayed in grey on the display cannot be played
back by this unit.
This unit can be played back via connected equipment only
when controlled using Digital Media Controller.
Depending on the performance of the connected PC, video
frames may be dropped during playback, or video may not
be played back at all. (> 95)
Playable contents
Container
Video
codec
Audio codec
Example of
file
extension
Recorded
programmes
(XP/SP/LP/
EP/FR)
§
1, 2
MPEG2
Dolby
®
Digital
Linear PCM
.mpg
.mpeg
Recorded
programmes
(DR/HG/HX/
HE/HL/HM)
§
1, 2
MPEG2
H.264
MPEG
HE-AAC
Dolby
®
Digital
.m2ts
.ts
AVCHD
§
1
H.264
Dolby
®
Digital
.mts
MP4 H.264 AAC .mp4
MPEG2 MPEG2
Dolby
®
Digital
Linear PCM
.mpg
.mpeg
Xvid H.264 MP3
Dolby
®
Digital
.avi
MKV H.264 AAC-LC
MP3
Dolby
®
Digital
PCM
Vorbis
FLAC
.mkv
Format Example of file extension
JPEG .jpg
MPO
§
3
.mpo
Audio codec Example of file extension
MP3 .mp3
WAV .wav
AAC .m4a
WMA .wma
FLAC .flac
Linear PCM
Using this unit as Media Renderer
This unit
(Media Renderer)
Controller
§
Server
This unit
(Media Renderer)
Server
+
Controller
§
DMR-HCT230_130EG_eng.book 64 ページ 2013年7月8日 月曜日 午後5時42分
Network
VQT5C33
65
Wi-Fi Direct is a standard that enables wireless
LAN devices to communicate each other directly
without a wireless broadband router.
This unit can be connected wirelessly and directly
to other DLNA compatible equipment on a
temporary basis, regardless of the network
connection and settings of this unit.
1 Press [FUNCTION MENU].
2 Select “Wi-Fi Direct” in “Home Network”,
then press [OK].
3 Select the item, then press [OK].
Set up the device to be connected so that a
Wi-Fi Direct connection can be made. For
details, refer to the operating instructions
for the device to be connected.
4 Select the device to be connected, then
press [OK].
If the device you want to connect to is not
displayed, switch the connection method
by pressing the green button.
If the corresponding device is not found even after
the search is run again, select “Next” and change
the connection method.
Select the connection method according to the
device to be connected.
You can enjoy the content you are viewing on a
Miracast-compatible smartphone, etc. on the big
screen of your TV.
Compatible with Android
TM
device, ver. 4.2 and
above and Miracast certified.
For information on whether the smartphone, etc.
supports Miracast, contact the manufacturer of
the device.
1 Press [FUNCTION MENU].
2 Select “Miracast” in “Home Network”, then
press [OK].
3 Operate the Miracast compatible equipment.
To exit from Miracast
Press [EXIT ].
Using Smart Home Networking
(DLNA) with Wi-Fi Direct
TM
5 When selected “DLNA Client”:
Go to step 4 on page 63.
When selected “DLNA Server”:
Operate the playback equipment (Client).
When selected “Media Renderer”:
Operate the Digital Media Controller.
Wi-Fi Direct compatible equipment
This unit
Connecting temporarily
When no devices are found
Using Miracast
TM
Wi-Fi Direct Connection
Device not found.
To connect with a Wi-Fi Direct compatible device,
please check connection mode of pairing device and
select “Search again”.
To connect with a Wi-Fi Direct incompatible device,
please select “Next”.
OK
Search again
Next
Wi-Fi Direct Connection
Please select connection method. Press RED button to
change the wireless type of connection with
the pairing device.
Press RETURN to finish.
Current Wireless type :
Wireless type
802.11n/g/b (2.4GHz)
OK
RETURN
WPS (PUSH button)
Manual setting
WPS (PIN code)
Miracast compatible
equipment
This unit
TV
DMR-HCT230_130EG_eng.book 65 ページ 2013年7月8日 月曜日 午後5時42分
Network
VQT5C33
66
Enjoying Network Service
Network Service allows you to access some
specific websites supported by Panasonic, and
enjoy Internet contents such as photos, videos,
etc. from Network Service home screen.
e.g.,
Network Service home screen
Images are for illustration purpose, contents
may change without notice.
Preparation
Network connection (> 17, 21)
To exit
Press [EXIT ].
Some features of websites may not be available on this
unit's web browser.
In the following cases, settings are possible using “Network
Service Settings” (> 73, 82)
- When restricting the use of Network Service.
- When the audio is distorted.
If using slow Internet connection, the video may not be
displayed correctly. A high-speed Internet service with a
speed of at least 6 Mbps is recommended.
Be sure to update the software (firmware) when a software
(firmware) update notice is displayed on the screen.
If the software (firmware) is not updated, you will not be
able to use the Network Service function.
The services through Network Service are operated by their
respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
All features of websites or content of the service may not be
available.
Some contents may be inappropriate for some viewers.
Some contents of Network Service may only be available
for specific countries and may be presented in specific
languages.
If timer recording starts, Network Service will stop.
To enjoy video communication (e.g., Skype
TM
)
Connect this unit with optional Communication
Camera (TY-CC20W or TY-CC10W).
Depending on the area, this optional camera
may not be available. Please consult your local
Panasonic dealer for advice.
For operating method refer to the following
website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
When this unit receives incoming call etc.,
“NEW MESSAGE” appear on the unit’s display.
Cannot be used while recording, copying or
performing Wi-Fi Direct.
MORE
BACK
Featured Videos
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
This unit’s rear panel
e.g.,
Communication Camera
TY-CC20W or TY-CC10W
1 Press [INTERNET].
The message is displayed. Please read it
carefully and then press [OK].
The video communication service can be
accessed directly by pressing [ ] button.
2 Select the item, then press [OK].
Operable buttons:
[3, 4, 2, 1], [OK], [RETURN ], colour
buttons and number buttons.
DMR-HCT230_130EG_eng.book 66 ページ 2013年7月8日 月曜日 午後5時42分
With Other Equipment
VQT5C33
67
Copying the HD Video (AVCHD)
With Other
Equipment
§
“For data files (> 8)” only
e.g., Connecting to the Panasonic video camera
2 Select “Copy Video ( AVCHD )”, then press
[OK].
4 Press [OK].
To stop copying
Press and hold [RETURN ] for 3 seconds.
The original file must be in the AVCHD standard.
If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the
connected equipment.
An AVCHD title with 100 or more scenes will be divided into
titles every 99th scene and copied.
This unit cannot copy the titles in the HDD to
the media. Be careful when deleting the
original title on the media.
USB connection cable
(optional)
1 Connect the video camera or insert the
media.
Make the video camera ready for data
transfer.
The menu screen appears. (> 40)
§
video camera, etc.
3 Select the title, then press the yellow button.
A check mark is displayed. Repeat this step.
Press the yellow button again to cancel.
(All the recordings on the same date
become a title.)
5 Select “Start”, then press [OK].
It may take time for the copying to start.
Screen icons
(NTSC)
(PAL)
Title recorded using a different
encoding system from that of the
unit.
Titles displaying these marks
cannot be selected.
Time
Rec time
Size 200 MB
0:30
9:00
HDD
Copy Video ( AVCHD ) Destination Capacity
Size
SD
002
003
004 AVCHD
AVCHD
AVCHD
AVCHD
001
No. Channel
e.g., [SD]
DMR-HCT230_130EG_eng.book 67 ページ 2013年7月8日 月曜日 午後5時42分
With Other Equipment
VQT5C33
68
Registering the external HDD (USB HDD)
§
“For recorded titles (> 8)” only
If you intend to move recorded titles to a
USB HDD, the USB HDD must be registered to
this unit first.
Limitation information
A USB HDD with a capacity of less than 160 GB
cannot be used.
Registering of a USB HDD will format the
USB HDD and all the content already recorded
will be deleted.
Up to eight USB HDDs can be registered on this
unit.
Registered USB HDDs cannot be used with
devices other than this unit.
Certain non-confirmed USB HDDs cannot be
used with this unit.
If a problem occurs with the USB HDD, please
contact the manufacturer of the device.
Connect this unit with optional USB HDD.
Only one USB HDD (For recorded titles, > 8)
can be connected at the same time.
Do not connect additional HDDs using a USB
hub.
For details about connection method, refer to
the instructions supplied with the USB HDD.
Please use the following procedure to disconnect.
Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.
1 Press [FUNCTION MENU].
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Settings for USB HDD” in “HDD /
USB HDD”, then press [OK].
4 Select “USB HDD Disconnection”, then
press [OK].
5 Select “Yes”, then press [OK].
6 Disconnect the USB HDD from this unit.
Regarding the external HDD (USB HDD)
Please use a confirmed USB HDD.
For the latest information on confirmed USB
HDDs, please check the following website.
http://panasonic.jp/support/global/cs/
§
Connecting the USB HDD
Disconnecting the USB HDD
This unit’s rear panel
e.g.,
USB HDD
DMR-HCT230_130EG_eng.book 68 ページ 2013年7月8日 月曜日 午後5時42分
With Other Equipment
VQT5C33
69
If the registering screen appears when
connecting the USB HDD, go to step 5.
1 Press [FUNCTION MENU].
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Settings for USB HDD” in “HDD /
USB HDD”, then press [OK].
4 Select “USB HDD Registration”, then press
[OK].
6 When the registering is complete, message
screen appears.
Press [OK].
7 The confirmation screen appears.
Press [OK].
To cancel all USB HDD registrations
Refer to “Cancellation of all USB HDD
Registrations”. (> 78)
If you register a USB HDD, all the content already recorded
on the USB HDD will be deleted.
It is not possible to play back the content on the USB HDD
whose registration has been cancelled.
You can check the registration number of the USB HDD on
the DIRECT NAVIGATOR. (> 37)
Registering the USB HDD
5 Select “Yes”, then press [OK].
If you have already registered eight
USB HDDs, it will be necessary to delete
one or more of them before registering a
new USB HDD.
The message screen appears:
1 Select “Yes”, then press [OK].
2 Select the USB HDD to cancel, then
press [OK].
The confirmation screen appears.
3 Select “Yes”, then press [OK].
DMR-HCT230_130EG_eng.book 69 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
70
VIERA Link functions
Convenient
functions
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient
function which will link the operations of this unit
and a Panasonic TV (VIERA) or an
amplifier/receiver. You can use this function by
connecting the equipment with the HDMI cable.
See the operating instructions for connected
equipment.
When the following operations are performed, the
input channel of the TV will be automatically
switched and the screen of this unit will be
displayed. Additionally when the TV is off, the TV
will automatically turn on.
- When play starts on this unit
- When an action that uses DIRECT NAVIGATOR
etc, is performed
When you set the TV to standby mode, this unit is
also automatically set to standby mode.
Power off link function does not work when
recording, copying etc.
The following operations make it possible to keep
the power of the unit on and to play music
continuously.
When the unit is directly connected to an
amplifier/receiver.
1 While playing music
Press [OPTION].
2 Select “TV Power Off”, then press [OK].
Sound may be discontinued for several seconds
when the power to the TV is turned off.
This function is available with the TV that
supports “HDAVI Control 2” or later.
You can operate this unit with the TV remote
control.
Refer to “PAUSE LIVE TV”. (> 28)
This function is available with the TV that
supports “HDAVI Control 3” or later.
This function allows you to immediately start
recording the programme that you are viewing on
the TV.
Refer to the TV operating instructions for
operation.
This function is available with the TV that
supports “HDAVI Control 3” or later.
You can operate this unit using the TV remote
control.
Refer to the operating instructions of the TV about
the buttons that you can use.
This function is available with the TV that
supports “HDAVI Control 2” or later.
This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the standard for Panasonic’s HDAVI
Control compatible equipment. This standard is compatible
with Panasonic’s conventional HDAVI equipment.
Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.
VIERA Link “HDAVI Control”, based on the control functions
provided by HDMI which is an industry standard known as
HDMI CEC (Consumer Electronics Control), is a unique
function that we have developed and added. As such, its
operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
These functions may not work normally depending on the
equipment condition.
Use the remote control supplied with this unit if you cannot
operate this unit using buttons on the TV remote control.
The operation of this unit may be interrupted when you
press certain buttons on the TV remote control.
Automatic input switching/
Power on link
Power off link
Playing music continuously even after
turning off power to the TV
PAUSE LIVE TV
Direct TV Recording
Easy control only with Panasonic TV’s
remote control
DMR-HCT230_130EG_eng.book 70 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
71
Playback menu
A variety of operations and settings such as
changing the subtitles and audio languages can
be performed during playback of video or music.
Also, picture and sound quality can be set to your
personal taste.
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu” or select “Playback Settings”, then
press [OK].
3 Select the menu, then press [OK].
4 Select the item, then press [OK].
5 Change the setting.
Depending on the condition of the unit (playing,
stopped, etc.) and media contents, there may be
some items which cannot be selected or for which
the effects do not work properly.
To clear the Playback menu
Press [RETURN ] until the Playback menu
disappears.
Basic Operation
Multi Audio Audio1 (Dolby D)
Subtitle Language eng (MPEG)
Subtitle Settings On
Audio Channel LR
Repeat Play Off
Aspect Normal
Menu
Item
Setting
e.g.,
Basic Operation
Soundtrack
Show or change the soundtrack.
Multi Audio
Switch in the case of multiple audio.
Audio Channel
Change audio (LR/L/R) during playback.
Subtitle Settings
Turn the subtitle on/off, and change the
language depending on the media.
Subtitle Language
Select the subtitle language in the case of
multiple languages.
Repeat Play
Select the item which you want to repeat.
Random
Select whether to play random or not.
Video
The original video recording method
(MPEG-4 AVC etc.) appears.
Aspect (> 88)
Reception
The radio wave status during the playback of
Smart Home Networking (DLNA) is displayed.
(Only when a wireless connection is used)
DMR-HCT230_130EG_eng.book 71 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
72
Playback menu
Language
The menu is not displayed when playing photos.
Video Settings
Picture Mode
Select the picture quality mode.
HD optimizer
Reduces unnecessary noise in videos. The
greater the value is the less noise will appear.
Chroma Process
Adjusts the colour bandwidth, saturation, and
hue of images by correcting colour signals
with a high degree of precision.
Super Resolution / Detail Clarity
Adjusts the sharpness of images. The greater
the value is, the sharper images will be.
Luma Process
Adjusts the contrast, brightness, and
black-and-white gradation.
Progressive
Select the method of conversion for
progressive output to suit the type of title being
played.
•Auto
Automatically detects the film and video
content, and appropriately converts it.
•Video
Select this setting when the content is
distorted if “Auto” is selected.
•Film
Select this if the edges of the
film content appear jagged or
rough when “Auto” is
selected. However, if the
video content is distorted as shown in the
illustration to the right, then select “Auto”.
Reset to Default Video Settings
Restores the default settings of the Video
Settings menu.
Sound Settings
Sound Effects
This function is effective when “Digital Audio
Output” is set to “PCM”. (> 79)
Re-master 1/Re-master 2
Sound becomes more natural by adding
higher frequency signals not recorded on
the track.
Dialogue Enhancer
The volume of the centre channel is raised to
make dialogue easier to hear.
3D Settings
Signal Format (> 44)
3D Picture Mode (> 44)
Manual Settings (> 44)
Graphic Display Level
You can change the 3D position of the
playback settings display, etc., during the 3D
playback.
ENG English JPN Japanese ARA Arabic
FRA French CHI Chinese HIN Hindi
DEU German KOR Korean PER Persian
ITA Italian MAL Malay IND Indonesian
ESP Spanish VIE Vietnamese MRI Maori
NLD Dutch THA Thai BUL Bulgarian
SVE Swedish POL Polish RUM Romanian
NOR Norwegian CES Czech GRE Greek
DAN Danish SLK Slovak TUR Turkish
POR Portuguese HUN Hungarian ¢ Others
RUS Russian FIN Finnish
DMR-HCT230_130EG_eng.book 72 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
73
Basic Settings
You can change the unit’s settings of DVB Tuning,
Sound, Display, Connection, Network etc. in the
menu.
1 Press [FUNCTION MENU].
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select the menu, then press [OK].
To return to the previous screen
Press [RETURN ].
The locations of the setting items are as follows.
For details on each setting item, please refer to
the following pages.
Common procedures
4 Select the item, then make the setting.
(> right)
Follow the instructions on the screen if
further operations are necessary.
Depending on the connection or the status
of this unit some items cannot be selected
or changed.
Basic Settings
OK
RETURN
DVB Tuning
HDD / USB HDD
Picture
Sound
Display
Connection
Network
Others
Menu list
DVB Tuning
Favourites Edit (> 75)
Auto Setup (> 75)
Settings for DVB-C Channels (> 76)
Channel List (> 76)
Manual Tuning (> 76)
Update Channel List (> 76)
Signal Condition (> 76)
New Channel Message (> 76)
Settings for DVB-T Channels (> 76)
Channel List (> 76)
Manual Tuning (> 76)
Update Channel List (> 77)
Signal Condition (> 77)
New Channel Message (> 77)
Child Lock (> 77)
Child Lock List (> 77)
Parental Rating (> 77)
Preferred Language (> 77)
HDD / USB HDD
Settings for Recording (> 77)
Timer Record Start Buffer (> 77)
Timer Record Stop Buffer (> 77)
REWIND LIVE TV (> 77)
Recording for Encrypted Channel (> 77)
PIN Entry for Decrypt Recording (> 77)
Aspect for Recording (> 78)
Chapter Creation (> 78)
Subtitle Text (> 78)
HDD Management (> 78)
Delete all titles (> 78)
Delete all photos (> 78)
Format HDD (> 78)
Settings for USB HDD (> 78)
USB HDD Registration (> 78)
USB HDD Disconnection (> 78)
USB HDD Management (> 78)
Delete all titles (> 78)
Format USB HDD (> 78)
Cancellation of all USB HDD Registrations (> 78)
DMR-HCT230_130EG_eng.book 73 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
74
Basic Settings
Picture
Still Mode (> 79)
Sound
Dynamic Range Compression (> 79)
Downmix (> 79)
Bilingual Audio Selection (> 79)
Digital Audio Output (> 79)
PCM Down Conversion (> 79)
Dolby Digital / Dolby Digital Plus (> 79)
MPEG (> 79)
Audio Delay (> 79)
Audio for HG / HX / HE / HL / HM Recording (> 79)
Display
Language (> 80)
On-Screen Information (> 80)
Unit’s Display (> 80)
Screen Saver (> 80)
Teletext (> 80)
Connection
3D Settings (> 80)
3D Type (> 80)
3D AVCHD Output (> 80)
3D Playback Message (> 80)
TV Aspect (> 80)
Aspect for 4:3 Video (> 80)
TV System (> 80)
HDMI Connection (> 80)
HDMI Video Format (> 80)
Deep Colour Output (> 80)
HDMI Audio Output (> 81)
Contents Type Flag (> 81)
VIERA Link (> 81)
Common Interface (> 81)
Network
Easy Network Setting (> 81)
Network Settings (> 81)
LAN Connection Mode (> 81)
Wireless Settings (> 81)
Connection Setting (> 81)
Double Speed Mode Setting ( 2.4GHz ) (> 81)
IP Address / DNS Settings (> 82)
Proxy Server Settings (> 82)
Network Service Settings (> 82)
Lock (> 82)
Automatic Volume Control (> 82)
Remote Recording Function Settings (> 82)
Remote Recording function (> 82)
Device ID (> 82)
Initialize Device Password (> 82)
Home Network Settings (> 83)
Home Network function (> 83)
Setting device name (> 83)
Conversion Setting for DLNA (> 83)
Resolution Setting for DLNA (> 83)
Registration type for remote devices (> 83)
Remote device list (> 83)
Others
Standby Settings (> 84)
Quick Start (> 84)
Automatic Standby (> 84)
Automatic Standby after OTR (> 84)
Automatic Standby after Copy (> 84)
[DVB-C] RF OUT ( CATV Signal ) (> 84)
[DVB-T] RF OUT ( Aerial Signal ) (> 84)
Power Save for Network Standby (> 84)
Remote Control (> 84)
Clock (> 85)
PIN Entry (> 85)
System Update (> 85)
Software Update in Standby (> 85)
Software Update Now ( Broadcast ) (> 85)
Software Update Now ( Internet ) (> 85)
Software Licence (> 85)
System Information (> 85)
Initialize (> 85)
Shipping Condition (> 85)
Default Settings (> 85)
DMR-HCT230_130EG_eng.book 74 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
75
DVB Tuning
Favourites Edit
You can create four favourites of channels for
making viewing and recording easier.
After editing as follows, save the Favourites.
Press [RETURN ], then press [OK].
To select the other Favourites list:
Press the green button.
To add channels to the Favourites list:
Select the channel in the “All DVB Channels”
column, then press [OK]. Repeat this step.
Red: Change the sorting mode.
Yellow: Add continuous block of channels to
the list at once.
•Press [3, 4] to make the block, then press
[OK].
Blue: Select the Category.
To change the order of the channels list:
1 Select the channel in the “Favourites”
column to move, then press the green
button.
2 Select the new position, then press the
green button.
To delete channels:
Select the channel in the “Favourites” column,
then press [OK].
Yellow: Delete all channels.
To change the name of the Favourites list:
1 Press the red button in the “Favourites”
column.
2Press [3, 4, 2, 1] to select a character,
then press [OK].
Repeat this step to enter other characters.
Red: Delete a character.
Blue: Delete all characters.
3 Press [RETURN ].
Auto Setup
You can restart the Auto Setup. (> 19)
1 Select “Yes”, then press [OK].
If the country selection screen appears:
Select the country, then press [OK].
2 Follow the on-screen instructions and make
the following settings.
[DVB-C]
1 Select “Digital Cable (DVB-C) Channels”,
then press [OK].
2 Select the item, then press [OK].
(For details, consult the cable provider.)
3 Select the items and change the items.
(For details, consult the cable provider.)
Channel number allocation
Preset Channel Number
Operator’s Channel Number ( LCN )
Search Mode
All Channels
Search for all channels.
Free Channels
Search for free channels only.
Scan Mode
Quick:
Scans the suitable frequency for the
selected country.
Full:
Scans the whole frequency range.
Frequency/Symbol Rate/Network ID
Normally set to “Auto”.
If “Auto” is not displayed or if necessary,
enter the value specified by your cable
provider with number buttons.
4 Select “Start scan”, then press [OK].
Auto Setup starts.
[DVB-T]
Select “Digital Terrestrial (DVB-T) Channels”,
then press [OK].
Auto Setup starts.
The timer recording programmes are cancelled.
DMR-HCT230_130EG_eng.book 75 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
76
Basic Settings
Settings for DVB-C Channels
[DVB-C]
Channel List
You can edit the channel list.
To hide/reveal channels
1 Select the channel.
2 Press [OK].
The check mark is removed/displayed.
Red: Change the sorting mode.
Yellow: Reveal all channels.
Blue: Change the Category.
To change the channel number assignment
1 Select the channel to change, then press
the green button.
2 Enter the channel number to reassign
with the number buttons.
3 Press [OK].
Manual Tuning
You can add new channels manually.
1 Adjust the frequency, symbol rate and
service ID. (For details, consult the cable
provider.)
Adjust the frequency by checking the
signal strength and signal quality
displays.
2 Select “Start scan”, then press [OK].
The set channel is displayed in the table.
This function is not available during an Operator
profile update. (> 27)
Update Channel List
You can update the channel list to the latest
one.
This function is not available during an Operator
profile update. (> 27)
Signal Condition
You can check the quality and strength of
signals.
Press [CH WX] to select the channel.
When the signal is too strong (red bar), reduce the
CATV signal. (For details, consult your dealer or the
cable provider.)
When the signal is weak, check that the current
broadcast channel is correctly broadcasting.
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
Settings for DVB-T Channels
[DVB-T]
Channel List
You can edit the channel list.
To hide/reveal channels
1 Select the channel.
2 Press [OK].
The check mark is removed/displayed.
Red: Change the sorting mode.
Yellow: Reveal all channels.
Blue: Change the Category.
To change the channel number assignment
1 Select the channel to change, then press
the green button.
2 Enter the channel number to reassign
with the number buttons.
3 Press [OK].
Manual Tuning
You can add new channels manually.
1 Press [3, 4] to select the frequency.
Adjust the frequency by checking the
signal strength and signal quality
displays.
2 Press [OK] to start scan.
The set channel is displayed in the table.
DMR-HCT230_130EG_eng.book 76 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
77
Update Channel List
You can update the channel list to the latest
one.
Signal Condition
You can check the quality and strength of
signals.
Press [CH WX] to select the channel.
The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of
the cable that is connected to the aerial, etc.
When the signal is too strong (red bar), reduce the
signal amplification at your aerial. (For details, consult
your dealer.)
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
Child Lock
PIN is required to change. (> 24)
Child Lock List
You can restrict the viewing of channels and
playback of titles.
1 Select the channel to lock.
2 Press [OK].
is displayed.
Press [OK] again to cancel.
Green: Lock all channels.
Yellow: Unlock all channels.
Parental Rating
You can restrict the viewing and recording of
channels unsuitable to children.
Set a ratings level to limit broadcast viewing
and playback.
Follow the on-screen instructions.
Preferred Language
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.
HDD / USB HDD
Settings for Recording
Timer Record Start Buffer
This function sets the timer recording to start
earlier than the TV Guide time.
Timer Record Stop Buffer
This function sets the timer recording to stop
later than the TV Guide time.
REWIND LIVE TV
Turn on/off the REWIND LIVE TV function.
When “Automatic Standby” is set to “Off”
(> 84), “On” cannot be selected.
Recording for Encrypted Channel
The function allows you to change the
recording limitation on the encrypted
programme. (> 31)
PIN Entry for Decrypt Recording
If your CAM requires a PIN for timer
recording, it can be entered here in advance.
DMR-HCT230_130EG_eng.book 77 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
78
Basic Settings
Aspect for Recording
Sets the aspect ratio when recording or
copying except in DR mode.
“HG”, “HX”, “HE”, “HL” or “HM” mode:
If “Automatic” is selected, the title will be
recorded with the original aspect ratio.
“XP”, “SP” or “LP” mode:
If “Automatic” is selected, the title will be
recorded with the original aspect ratio at the
time when recording started (including when
recording started at a commercial, etc.).
“EP” mode:
If “Automatic” is selected, aspect is fixed to
4:3.
Chapter Creation
Set the Chapter Creation method.
Even if “Automatic” is selected, depending
on the programme to be recorded, the
chapter may not be created correctly.
Subtitle Text
Select the language for Xvid and MKV subtitles
text.
This item is displayed only after playing back a
Xvid or MKV file with subtitle text.
HDD Management
Press and hold [OK] for 3 seconds to show the
following settings.
Delete all titles
Delete all titles (video) on the built-in HDD.
Delete does not work if one or more titles
are protected.
Delete all photos
Delete all photos on the built-in HDD.
Format HDD
Formatting deletes all contents on the
built-in HDD, and they cannot be restored.
Check carefully before proceeding.
Settings for USB HDD
USB HDD Registration
Register the USB HDD. (> 69)
USB HDD Disconnection
This function puts the USB HDD in a state in
which it can be safely disconnected. (> 68)
USB HDD Management
Press and hold [OK] for 3 seconds to show
the following settings.
Delete all titles
Delete all titles on the USB HDD.
Delete does not work if one or more
titles are protected.
Format USB HDD
Formatting deletes all contents, and
they cannot be restored. Check
carefully before proceeding.
Cancellation of all USB HDD Registrations
This function cancels the registrations of all
the USB HDDs registered on this unit.
Only do this if you are going to dispose of this
unit.
Before operation, perform “USB HDD Disconnection”
(> above) and remove the USB HDD.
It is not possible to play back the content from a
USB HDD whose registration has been cancelled.
DMR-HCT230_130EG_eng.book 78 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
79
Picture
Still Mode
Select the type of picture shown when you pause
play.
•Field:
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
•Frame:
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected.
(The picture is clearer and finer.)
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
The audio will be output in “Stereo” during
AVCHD playback.
Bilingual Audio Selection
Select whether to record the audio type (“M1” or
“M2”) when:
- File Conversion (> 47)
Digital Audio Output
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
•On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
•Off:
Signals are output as 96 kHz.
The signals will be converted to 48 kHz
regardless of the setting when the signals
have a sampling frequency of over 96 kHz.
Dolby Digital / Dolby Digital Plus
MPEG
Select the audio signal to output.
Select “PCM” when the connected
equipment cannot decode the respective
audio format.
Not making the proper settings may result in
noise.
When using the DIGITAL AUDIO OUT terminal, there
are following restrictions on Dolby Digital / Dolby
Digital Plus.
- When “Bitstream” is selected, Dolby Digital Plus
audio is output as Dolby Digital.
- When “PCM” is selected, audio is output as
Down-mixed 2ch PCM.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio for HG / HX / HE / HL / HM Recording
If the programme has multi channel audio,
priority is given to what you select.
This setting will give effect in the following
cases.
- Timer recording (> 33)
- File Conversion (> 47)
DMR-HCT230_130EG_eng.book 79 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
80
Basic Settings
Display
Language
Select the language for on-screen menus.
On-Screen Information
Select the time until the channel information
screen (> 26) disappears automatically.
Unit’s Display
Changes the brightness of the unit’s display.
If “Automatic” is selected, the display turns dark
during play and disappears when the unit is in
standby mode. While using this mode, the
standby power consumption can be reduced.
When “Quick Start” is set to “Off” or “Timer
Setting for Quick Start” (> 84), this function is
fixed to “Automatic”.
Screen Saver
This is to prevent burn-in on the screen.
Teletext
Select the Teletext (> 27) display mode.
Connection
3D Settings
3D Type
If 3D video cannot be played back in 3D, you
may be able to play it in 3D by changing the
setting.
Change the settings for 3D on the TV also
when “Side by side” is selected.
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video
and cannot be played back correctly, you may
be able to play it by changing the setting.
3D Playback Message
Set to display or hide the 3D viewing warning
screen.
TV Aspect
Set to match the type of TV connected.
Pan & Scan:
Side picture is trimmed for 16:9
picture.
The pictures may be shown in
the letterbox style depending
on the content.
Letterbox:
Black bands appear for 16:9
picture.
Aspect for 4:3 Video
To play a 4:3 title, set how to show pictures on a
16:9 TV.
TV System
Set in accordance with the TV System for the
connected TV.
HDMI Connection
HDMI Video Format
You can only select items compatible with the
connected equipment.
If “Automatic” is selected, the output
resolution best suited to the connected TV
(1080p, 1080i, 720p or 576p/480p) is
automatically selected.
To enjoy High Quality Video up-converted to
1080p, you need to connect the unit to
1080p compatible HDTV. If this unit is
connected to an HDTV through other
equipment, it must also be 1080p
compatible.
Deep Colour Output
This setting is for selecting whether to use
Deep Colour output when a TV that supports
Deep Colour is connected.
DMR-HCT230_130EG_eng.book 80 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
81
HDMI Audio Output
Select “Off” when connected to an
amplifier/receiver with a DIGITAL AUDIO
OUT terminal.
Contents Type Flag
If “Automatic” is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select “Off” when you do not want to use
“HDAVI Control”.
Common Interface
Access to software contained on CI module.
(> 12)
Select “Slot 1:” or “Slot 2:” and press [OK].
Follow the on-screen instructions.
This setting cannot be made when “TV
System” is set to “NTSC” (> 80).
On-screen instructions may not correspond to the remote
control buttons.
For more information about TV service, please contact
your service provider.
Depending on the card, in some cases its use together
with this unit may be limited or not possible.
Network
Easy Network Setting
Press [OK] to start Easy Network Setting. (> 21)
Network Settings
LAN Connection Mode
Select the LAN connection method.
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
e.g.,
1 Encryption type
2 Reception
3 Type of wireless router
Connection Setting
The Wireless router connection wizard will
be displayed.
Double Speed Mode Setting ( 2.4GHz )
When a 2.4 GHz wireless format is used,
this setting sets the connection speed.
If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the
same frequency band, and there is
consequently a greater risk of reception
interference. This can cause the
connection speed to drop or the
connection to become unstable.
Wireless Settings
Double Speed Mode Setting ( 2.4GHz )
Connection Setting
Current connection settings
The current connection settings and status are
displayed.
Connection status
Current status
Network name
( SSID )
Wireless type
802.11n (2.4GHz/20MHz)
Authentication type
Encryption type
AES
Connected
Reception
DMR-HCT230_130EG_eng.book 81 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
82
Basic Settings
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
To set the IP address and DNS
1 Set “IP Address Auto-assignment” and
“DNS-IP Auto-assignment” to “Off”.
2 Select the item, then press [OK] to show
the respective setting.
When the router’s DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the “IP
Address” and assign the same number for
“Subnet Mask” and “Gateway Address”.
Proxy Server Settings
Check and set the connection to the Proxy
server.
Press [OK] to show the respective setting.
Network Service Settings
Lock
You can restrict using Network Service.
PIN is required to change. (> 24)
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using Network
Service.
Depending on contents, this function will
not work.
Select “Off” when the audio is warped.
Remote Recording Function Settings
You must register to a service to use this
function.
For details please check the following
website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Remote Recording function
When you set a recording from a
smartphone or a PC, etc. away from
home, set this function to “On”.
Device ID
This is the device ID and device password
required for registering to and using a
service.
Initialize Device Password
The device password for this unit is
initialized.
When you initialize the device password,
you will not be able to use Remote
Recording function. To use the Remote
Recording function again, you must
re-register to the service.
DMR-HCT230_130EG_eng.book 82 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
83
Home Network Settings
You can set the DLNA (Server) function.
(> 62)
Home Network function
You can switch between enable/disable of
the DLNA (Server) and DMR (Media
Renderer) function.
If “On” is selected, the setting for “Quick
Start” is fixed to “On”. (> 84)
If “Off” is selected, the setting for
“Remote Recording function” is fixed to
“Off”. (> 82)
This cannot be set to “On” if the
connection with the wireless broadband
router is not encrypted in the wireless
connection.
Setting device name
It is also possible to change the name of
this unit on the network.
Select from a preset list
Select the preset name, then press [OK].
Create name
Enter the name.
Refer to “Entering text”. (> 87)
Conversion Setting for DLNA
•On:
When playing back on DLNA (Client)
compatible equipment, this setting
reduces the chance of break-ups and
freezing of an image by lowering the
image quality.
When this is set to “On”, switching the channel or
starting playback will take longer.
Resolution Setting for DLNA
When “Conversion Setting for DLNA” is set
to “On”, select the image quality.
Registration type for remote devices
Automatic:
All connected devices on the same
network can access this unit.
Manual:
Only registered devices can access this
unit.
Remote device list
To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select “Yes”, then press [OK].
To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select “Yes”, then press [OK].
This function cannot be enabled when
“Automatic” is selected in “Registration type for
remote devices”. (> above)
The maximum number of equipment that can be
registered is 16.
DMR-HCT230_130EG_eng.book 83 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
84
Basic Settings
Others
Standby Settings
Quick Start
•On:
It is possible to start quickly from standby
mode.
•Off:
Power consumption in standby mode is
minimized. (> 100)
However, startup time from standby mode
will be longer.
Timer Setting for Quick Start:
“Quick Start” is activated when the set time
comes.
When “Home Network function” (> 83) or “Remote
Recording function” (> 82) is set to “On”, the setting
for this function is fixed to “On”.
If “Off” or “Timer Setting for Quick Start” is selected, the
setting for “Unit’s Display” is fixed to “Automatic”. (
>
80)
The setting may be changed to “On” automatically
when the setting for video communication is changed.
(> 66)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
When “REWIND LIVE TV” is set to “On”
(> 77), “Off” cannot be selected.
Automatic Standby after OTR
•On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing “Automatic Stop” or
“Recording Time” (> 29).
Automatic Standby after Copy
•On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (> 67).
[DVB-C] RF OUT ( CATV Signal )
[DVB-T] RF OUT ( Aerial Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When “Quick Start” is not activated).
If “On” is selected, the broadcasting signal
is output from this unit.
Power Save for Network Standby
You can minimize power consumption in
standby mode even when the “Quick Start”
function is activated. (> 100)
When this is set to “On”, startup time when operating
[GUIDE] and [DIRECT NAVIGATOR] from standby
mode will be longer.
Remote Control
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
Use “Set Code1”, the factory set code, under
normal circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the
number button ([1] to [6]) for more than
5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
DMR-HCT230_130EG_eng.book 84 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
85
Clock
If the time is not set correctly, use the settings
listed in the method below.
Automatic
This unit usually obtains time and date
information from digital broadcasts.
Time Zone
When the time is not correct, set “Time Zone”.
(GMT - 6 to + 6)
Manual Setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
When the clock is set manually, you cannot perform
playing/recording/PAUSE LIVE TV/REWIND LIVE TV of
the programmes that are copy protected (Retention
limit). (> 13)
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number
buttons.
2 Enter the new 4-digit PIN with the number
buttons.
Make a note of PIN in case you forget it.
e.g.,
3 Press [OK].
OK
Remember the PIN.
PIN Entry
0 0 0 0
System Update
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (> 86) are
downloaded automatically at the time you
have specified.
Software Update Now ( Broadcast )
You can check for the latest software
(firmware) version and update the software
(firmware) from broadcaster immediately.
[DVB-C] However, some cable providers do
not support this function.
Software Update Now ( Internet )
Refer to “Software (Firmware) Update”.
(> 86)
Network connection and setting are
required. (> 17, 21)
Software Licence
Information about the software licence is
displayed.
System Information
Display Software (firmware) version, HDAVI
Control version and Wireless Module version
(When using wireless connection only) of this
unit.
Initialize
Shipping Condition
All the settings except for some settings
return to the factory preset.
The timer recording programmes are also
cancelled.
The device password is also initialized.
(> 82)
Default Settings
All the settings other than the tuning settings,
clock settings, rating PIN, remote control
code, device password, etc. return to the
factory presets.
DMR-HCT230_130EG_eng.book 85 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
86
Software (Firmware) Update
Software of this unit can be updated automatically
by the following methods at the specified time.
From broadcasts
(Default setting is 3 a.m. > 85, Software Update
in Standby)
[DVB-C] The CATV terminal connection is not
applicable to this function.
From Internet
Network connection and setting are required.
(> 17, 21)
If a software (firmware) update is available, a
notification is displayed.
Update of the software (firmware) will start when
the unit is turned to standby mode.
Use the “Software Update Now ( Broadcast )”
function or “Software Update Now ( Internet )”
function. (> 85)
It may take up to a few hours until the update is completed
depending on the network environment.
The timer recording always takes preference over the
software (firmware) download; if the timer recording is
scheduled to start, the downloading will be performed at the
next opportunity.
For the latest firmware update information, please refer to
the Panasonic support site below.
You can also download the latest software (firmware) from
the following website.
http://panasonic.jp/support/global/cs/
Software (firmware) of CAM (compatible CI Plus)
can be updated automatically from broadcasts.
Availability of software (firmware) update is
detected while viewing the programmes that are
compatible with CI Plus.
2 Follow the instructions on the screen.
Do not remove the CAM from this unit while updating.
CAM software (firmware) update notice is not displayed in
the following cases:
- When recording a programme
- When timer recording and CAM update occur
simultaneously
- When displaying FUNCTION MENU, DIRECT
NAVIGATOR, etc.
Operations such as view, playback, or record cannot be
performed while upgrading the CAM.
Any buttons on the remote control or the unit cannot be
used while upgrading the CAM.
If the timer recording is started, CAM software upgrade is
cancelled to start recording.
For details, refer to your CAM’s operating instructions or
consult your dealer.
You cannot operate the unit until the update
is complete. Don’t remove the AC mains lead
during the update. Removing the AC mains
lead while the update is in progress may
damage the unit.
Update software (firmware) of this unit
To update the software (firmware)
immediately
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
CI Plus compatible CAM software
(firmware) update
1 When notification is displayed on the screen,
select “Yes” and press [OK].
If for some reason the notification is not
displayed, or if cancelled, the notification is
instead displayed on the channel
information (> 26).
e.g.,
To execute CAM software upgrade, press
the red button.
10:30
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
CAM Upgrade Info
DMR-HCT230_130EG_eng.book 86 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
87
Other operations
[SD]
Formatting deletes all contents (including
computer data), and they cannot be restored.
Check carefully before proceeding.
1 Press [FUNCTION MENU].
2 Select “SD Card” in “Media”, then press
[OK].
3 Select “SD Card Management”, then press
[OK].
4 Select “Format Card”, then press [OK].
5 Select “Yes”, then press [OK].
6 Select “Start”, then press [OK].
7 Press [OK].
The contents are deleted when you format a card even if
you have set protection.
Do not disconnect the AC mains lead while formatting.
This can render the card unusable.
When a card has been formatted using this unit, it may not
be possible to use it on any other equipment.
Preparation
Show the “Enter Title Name” screen, etc.
To end partway
Press [RETURN ]. (Text is not added.)
If a name is long, parts of it may not be shown in some
screens.
Format SD card
Entering text
1 Select a character, then press [OK].
Repeat this step to enter other characters.
Press the red button or green button to select
character type and press [OK].
To delete a character:
Select the character in the name field, then
press [PAUSE ;].
To enter characters with number buttons:
e.g., entering the letter “R”
1 Press [7] to
move to the
seventh row.
2 Press [7] twice
to highlight “R”.
3 Press [OK].
2 Press [STOP ] (Set).
“Writing...” appears then the screen returns
to the previous screen and so on.
_
Enter Title Name
Space
Set
Delete
OK
RETURN
Standard Characters Other Characters
Name field: shows the text you have
entered
e.g.,
5
6
8
NO
JKL
M
PQR
TUV
7
7
qrs
p
7
qrs
p
7
qrs
p
DMR-HCT230_130EG_eng.book 87 ページ 2013年7月8日 月曜日 午後5時42分
Convenient functions
VQT5C33
88
Other operations
When the image does not match the screen size
of the TV, you can enlarge the image to fill the
screen.
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
3 Select “Aspect” in “Basic Operation”, then
press [OK].
4 Select the item, then press [OK].
This function does not work when watching 3D programme
and playing back 3D title or 3D photo.
It may also be adjusted using the screen mode of the TV
etc.
The screen mode is switched to “Normal” in the following
situations:
- when you change the channel
- when you start or end the playback of a title
- when you switch the unit on or to standby mode.
When “TV Aspect” (> 80) is set to “Pan & Scan” or
“Letterbox”, the “Zoom” effect is disabled.
The HOLD function deactivates all buttons on the
unit and remote control.
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” appears on the
unit’s display.
To cancel the HOLD function
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” disappears.
Switching the aspect ratio of the
screen
Normal:
Normal output
Side cut:
The black bars on the right and left sides of
the 16:9 image disappear and the image is
enlarged.
Zoom:
The black bars on the top and bottom sides
of the 4:3 image disappear and the image is
enlarged.
HOLD function
DMR-HCT230_130EG_eng.book 88 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
89
Troubleshooting guide
Troubleshooting
Before requesting service, make the following
checks. If the problem still persists, consult
your dealer for instructions.
Updating to the latest software (firmware) may
solve the problem. (> 86)
The unit is switched to standby mode
automatically.
VIERA Link has worked. (> 70, Power off link)
The followings do not indicate a problem
with this unit:
Regular HDD rotating sounds.
Poor reception due to atmospheric conditions.
Image disturbance during search.
Interruptions in reception due to periodic
broadcasting breaks.
When you switch the unit on or to standby
mode, there may be an unexpected sound.
General operation
The unit does not work.
Check the connections. (> 14)
One of the unit’s safety devices may have been
activated.
Reset the unit as follows:
1 Press [Í/I] on the main unit to switch the unit
to standby.
If the unit does not switch to standby, press
[Í/I] on the main unit for about 3 seconds.
The unit is forcibly switched to standby.
Alternatively, disconnect the AC mains
lead, wait one minute, then reconnect it.
2 Press [Í/I] on the main unit to switch it on. If
the unit still cannot be operated, consult the
dealer.
DMR-HCT230_130EG_eng.book 89 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
90
Troubleshooting guide
The remote control does not work.
The remote control and main unit are using
different codes. Change the code on the remote
control.
Software (firmware) is updating when “UPD
/” is displaying on the unit’s display. Wait until
the update is completed. (> 86)
The HOLD function is activated. (> 88)
Startup of this unit may be slower depending on
the TV settings.
“0:00” is flashing on the unit’s display.
Set the clock. (> 73, 85)
The clock does not display on the unit when
switched to standby.
The clock does not display when “Unit’s Display”
is set to “Automatic”. (> 80)
Screen size is wrong.
Check the “TV Aspect” or “Aspect for 4:3 Video”.
(> 80)
Adjust the aspect ratio setting on TV.
If you connect to 4:3 TV, set “HDMI Video
Format” to “576p/480p”. (> 73, 80)
Check “Aspect for Recording” before recording
or file conversion. (> 73, 78)
The black screen appears on the TV.
This phenomenon may occur, depending on the
TV setting, when “Quick Start” is activated.
Depending on the TV, this phenomenon may be
prevented by reconnecting to a different HDMI
input terminal.
TV reception is not displayed.
Broadcast signals are not output from this unit’s
RF OUT terminal. Select “On” in “RF OUT
( CATV Signal )” or “RF OUT ( Aerial Signal )”.
(> 73, 84)
Picture does not appear with the HD quality
although HD setting was made.
The pictures are output with 576p/480p
depending on the title.
The screen changes automatically.
If “Screen Saver” is set to “On”, the screen saver
function will be activated when there is no
operation for 5 minutes or more. (> 80)
There is a lot of image lag when playing video.
Set to “0” all items in the “HD optimizer”. (> 72)
Set “Audio Delay”. (> 73, 79)
Unit's display
Press and hold [OK] and
the indicated number
button at the same time
for more than 5 seconds.
(> 84)
Startup is slow.
Startup takes time in the following situations:
- The clock is not set.
- Immediately after a power failure or the AC
mains lead is connected.
- When the “Quick Start” is not activated. (> 84)
Displays
TV screen and video
DMR-HCT230_130EG_eng.book 90 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
91
Picture may not be seen when more than
4 devices are connected with HDMI cables.
Reduce the number of connected devices.
The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
Set “Deep Colour Output” (> 73, 80) or
“Contents Type Flag” (> 73, 81) to “Off”.
3D video is not output correctly.
3D video may be output correctly by changing
the following settings:
- “3D Type” of “3D Settings” (> 80)
- “Signal Format” (> 44, 3D settings during
playback)
Check the settings of the connected TV.
When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video
is not output. (> 15)
When the amplifier/receiver which is connected
between this unit and a TV is off, 3D video is not
output. (> 15)
When “HDMI Audio Output” is set to “Off”, 3D
video may not be output correctly. (> 81)
The images do not appear on the TV.
The picture is distorted during play, or video
will not play correctly.
Check the connections. (> 14)
Check the settings of the connected TV, etc.
An incorrect resolution is selected in “HDMI
Video Format”. (> 73, 80) Reset the setting as
follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) until “04 PRG”
is displayed on the unit’s display.
3 Press and hold [OK] for at least 3 seconds.
Set the item again.
When Dolby Digital Plus audio is not output
properly, select “Yes” in “Default Settings”
and make proper settings. (> 73, 85)
The same video is displayed in each left and
right half of the screen.
This is a 3D programme of the Side-by-Side
type.
Change the setting as follows if connecting with
a 3D compatible TV:
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
3 Select “3D Settings”, then press [OK].
4 Select “Side by side” in “Signal Format”, then
press [OK].
DMR-HCT230_130EG_eng.book 91 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
92
Troubleshooting guide
No sound.
Distorted sound.
Check the connections. (> 14)
Check the settings of the connected TV, etc.
Press [AUDIO] to select the audio. (> 26, 43)
To output audio from a device connected with an
HDMI cable, set “HDMI Audio Output” to “On”.
(> 73, 81)
Cannot change audio channel.
You cannot change the audio channel if “Digital
Audio Output” is set to “Bitstream” (> 79)
Cannot record.
Cannot copy.
Some broadcasts are copyright protected.
A part or whole of a recorded title has been
lost.
If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the title may be lost or
the HDD may become unusable. We cannot
offer any guarantee regarding lost programmes.
Encrypted titles cannot be decrypted.
Depending on the encrypted service, it may not
be possible to decrypt certain content.
Sound
Recording, timer recording and
copying
Timer recording does not work properly.
Failed timer recordings are displayed in grey
with on the Timer Recording screen. (> 36)
When you programme a timer recording, check
the screen icons. If “!” is displayed, this timer
programme may not be recorded because:
- there is not enough space left.
- the number of possible titles has reached its
maximum.
- programmes are deactivated, etc.
If your CAM requires a PIN for timer recording,
you need to enter PIN in advance. (> 77, PIN
Entry for Decrypt Recording)
Auto Renewal Recording does not work
properly.
The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as DIRECT NAVIGATOR is
displayed
Instead, the programme will be saved as a
separate programme and that will be
overwritten.
DMR-HCT230_130EG_eng.book 92 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
93
Cannot play back.
Refer to “Screen icons”. (> 37)
Depending on the encrypted service, it may not
be possible to play back certain titles if they
have been recorded without being decrypted.
Image for the Quick View is not smooth.
Image may not be played back smoothly in case
of high definition titles.
Cannot edit.
You may not be able to edit on the HDD if there
is no available space. Delete any unwanted
titles to create empty space. (> 45)
The contents of the SD card cannot be read.
Remove the card from the slot and then insert
again. If this does not solve the problem, switch
the unit to standby mode and turn it on again.
Copying, deleting and setting protection takes
a long time.
When there are a lot of folders and files, it may
sometimes take a long time.
Photos do not play back normally.
The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
(> 101)
This unit does not recognize the USB device
correctly.
If USB device is connected to this unit while
using a video communication the USB device
will not be recognized. Press [EXIT ] and
reconnect USB device.
If inserted during playback the USB device may
not be recognized by this unit.
Disconnect and reconnect the USB device. If it
still does not recognize the connection, switch
the unit to standby mode and turn it on again.
USB devices connected using a USB extension
cable other than a dedicated one or a USB hub
may not be recognized by this unit.
This unit does not recognize USB HDDs other
than those in which the size of one sector is
512-bytes or 4096-bytes. (For details, consult
the dealer of your USB HDD.)
Play
You have forgotten your rating PIN.
The rating level returns to the factory preset.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
“00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) until “03 VL” is
displayed on the unit’s display.
3Press [OK].
“INIT” is displayed on the unit’s display.
Edit
Photo
USB
DMR-HCT230_130EG_eng.book 93 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
94
Troubleshooting guide
The TV Guide information is not displayed
properly.
Set the clock correctly. (> 73, 85, Clock)
Some broadcast may not send programme
information.
There was a programme change, or TV Guide
information from a broadcast station was
possibly not correctly transmitted.
If signal quality is bad, the TV Guide system
may not be able to receive any data.
Digital broadcasts cannot be received.
To receive an encrypted broadcast, a CI module
valid for the broadcast is required.
Picture regularly breaks up on some
channels.
Adjust the reception with “Manual Tuning”.
(> 73, 76)
The channel which was once selectable
cannot be selected.
Reveal the channel on the channel list. (> 76)
Major channels and favourite channels are not
displayed on the top part of the channel list.
[DVB-C] To change channel allocation, restart
Auto Setup in Basic Settings menu and change
channel number allocation selection. (> 75)
You can change channel number assignment.
(> 76)
[DVB-T] Picture very infrequently breaks up on
some or all channels.
Electrical atmospheric interference caused by
bad weather may cause pictures to break up
and audio to mute or distort momentarily.
VIERA Link does not work.
Some functions may not work depending on the
version of “HDAVI Control” of the connected TV,
etc. This unit supports “HDAVI Control 5”
functions.
Check the settings of the connected TV, etc.
If the connection for the equipment connected
with HDMI was changed, or if there was a power
failure or the plug was removed from the
household mains socket, “HDAVI Control” may
not work.
In this case, change TV (VIERA) setting for
“HDAVI Control” again.
This unit does not support “ONE TOUCH PLAY
function of the Panasonic AV Control Receiver.
TV Guide
Broadcast
VIERA Link
DMR-HCT230_130EG_eng.book 94 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
95
You cannot access this unit from DLNA
compatible equipment on the network.
Check the network connection and the network
settings. (> 17, 21)
It may not be possible to connect depending on
the types of the equipment or the status of the
equipment.
When using this unit as a server, video frames
are dropped.
Change the following settings:
- Conversion Setting for DLNA (> 73, 83)
- Resolution Setting for DLNA (> 73, 83)
To return all the settings to the factory preset
Perform “Shipping Condition” or “Default
Settings”. (> 73, 85)
Network
You cannot play contents properly from DLNA
compatible equipment on the network.
There may be some video that cannot be played
back on DLNA compatible equipment
depending on the equipment.
Following titles may not be played back:
- A title with access restriction
- A title with contents protection (> 13)
- A title with incompatible format
- An encrypted title ( )
Playback via DLNA compatible equipment may
not be performed when this unit is in the
following conditions:
- While simultaneously copying and recording
- While displaying the Basic Settings menu
- While executing functions using a network,
such as Network Service
You cannot play back simultaneously from two
or more items of DLNA compatible equipment.
If the DLNA compatible equipment is not
capable of outputting HE-AAC audio format,
etc., sound may not be played back.
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
Use 802.11n (2.4 GHz or 5 GHz) Wireless
router.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
On the “Wireless Settings” screen (> 81), the
continuous lighting of at least four “Reception”
indicators is the target for a stable connection. If
three or fewer indicators are lit or the connection
is being interrupted, change the position or
angle of your Wireless router. If there is no
improvement, connect to a wired network and
perform the “Easy Network Setting” (> 21, 81)
again.
Reset
DMR-HCT230_130EG_eng.book 95 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
96
Troubleshooting guide
The following messages or service numbers
appear on the unit’s display when something
unusual is detected.
The remote control and main unit are using
different codes. Change the code on the remote
control. (> 90)
CAM is being updated. (> 86)
Selected titles in the USB HDD are being
converted.
Do not disconnect the USB HDD from this unit.
TV Guide data is being downloaded.
If there is no change after switching the unit to
standby mode and turning it on, consult the
dealer.
Displayed when the unit is started and is
switched to standby mode.
There was a power failure or the AC plug was
disconnected while the unit was on. The unit is
carrying out its recovery process. Wait until the
message disappears.
There are already 32 timer programmes. Delete
unnecessary timer programmes. (> 36)
The USB device is drawing too much power.
Remove the USB device.
Update of the software (firmware) is started.
You cannot operate the unit until the update is
complete. (> 86)
Software (firmware) is downloading.
Download will stop when the unit is turned on, or
the timer recording starts. (> 86)
The media is not supported.
Messages on the unit’s display
SET
(“” stands for a number.)
CAM-UP
CONV
GUIDE
HARD ERR
PLEASE WAIT
PROG FULL
REMOVE
START
SW-DL
UNSUPPORT
DMR-HCT230_130EG_eng.book 96 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
97
The software (firmware) is being updated.
You cannot operate the unit until the update is
complete. (> 86)
The unit is hot.
The unit switches to standby for safety reasons.
Wait for about 30 minutes until the message
disappears.
Install or place this unit with good ventilation.
A malfunction has occurred. The unit is trying to
restore to the normal operation. Once the
message disappears you can use the unit again.
If it remains displayed, consult the dealer.
HDMI cannot be output because it is connected to
a model that does not support copyright
protection.
The unit fails to operate properly. Press [Í/I] on
the main unit to switch the unit to standby mode.
Now press [Í/I] on the main unit again to turn the
unit on.
The HOLD function is activated. (> 88)
There is something unusual. (The service number
displayed after H and F depends on the unit’s
condition.)
Reset the unit as follows:
1 Disconnect the plug from the household mains
socket, wait a few seconds, then reconnect it.
2Press [Í/I] to turn the power on. (The unit may
be fixed.)
Request service from the dealer. Inform the
dealer of the service number when requesting
service.
UPD /
(“” stands for a number.)
U59
U61
U76
U99
XHOLD
H or F
(“” stands for a number.)
DMR-HCT230_130EG_eng.book 97 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
98
Troubleshooting guide
If there is any problem, the following message is
displayed on the screen.
When you experience problems with
Easy Network Setting
Wireless Settings
Display Check the following
A conflict with
other devices
occurred.
Please wait a few moments,
and then try again.
A time out error
occurred.
Setting of the Wireless router
for MAC Address etc.
The signal may be weak.
The SSID and the encryption
key of the Wireless router.
Please wait a few moments,
and then try again.
An
authentication
error or a time
out error
occurred.
A device error
occurred.
If the problem is not solved,
consult your dealer.
Easy Network Setting ( Home Network
Connection Check )
Display
Check the
following
1. LAN cable
connection or
Wireless setting:
“Fail”
Connection
of the LAN
cables
(> 17)
Settings of
the hub and
router
2. IP address
setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
Connection
and settings
of the hub
and router
Settings of
“IP Address /
DNS
Settings”
(> 73, 82)
2. IP address
setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address
setting:
“Pass”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address
setting:
“Home
network
available”
3. Connection to
gateway:
“Fail”
DMR-HCT230_130EG_eng.book 98 ページ 2013年7月8日 月曜日 午後5時42分
Troubleshooting
VQT5C33
99
Easy Network Setting ( Internet Connection
Test )
Display Check the following
Cannot find the
server. (B019)
“Primary DNS” and
“Secondary DNS” settings
of “IP Address / DNS
Settings” (> 73, 82)
No connection
could be made to
the server. (B020)
The server may be busy or
the service may have been
suspended. Please wait a
few moments, and then try
again.
Settings of “Proxy Server
Settings” (> 73, 82) and the
router.
DMR-HCT230_130EG_eng.book 99 ページ 2013年7月8日 月曜日 午後5時42分
Reference
VQT5C33
100
Specifications
Reference
Specifications are subject to change without
notice.
General
Dimensions: 300 mm (W)
52 mm (H)
(excluding the projecting parts)
179 mm (D)
(including the projecting parts)
190 mm (D)
Mass: [HCT230] Approx. 1.6 kg
[HCT130] Approx. 1.3 kg
Power supply: AC 220 V to 240 V, 50 Hz
Power consumption: [HCT230] Approx. 32 W
[HCT13 0] Approx. 29 W
“Quick Start” is activated and “Power Save
for Network Standby” is set to “Off”
Approx. 5 W
“Quick Start” is activated and “Power Save
for Network Standby” is set to “On”
Approx. 4 W
“Quick Start” is not activated and
“RF OUT ( CATV Signal )” or “RF OUT
( Aerial Signal )” is set to “Off”
Approx. 0.2 W
Operating temperature: 5 oC to 40 oC
Operating humidity range: 10 % to 80 % RH
(no condensation)
TV system
Tuner System: DVB-C/T
Country: Germany, Austria, Switzerland
Channel coverage: VHF: 5 - 12
UHF: 21 - 69
CATV :S1 - S20 (M1 - U10) 7 MHz Band
D051 - D073
D113 - D858
Recording system
DR mode: Partial TS
HG, HX, HE, HL, HM mode:
MPEG-4 AVC/H.264, Dolby Digital
XP, SP, LP, EP mode:
MPEG-2 (Hybrid VBR), Dolby Digital
Output terminal
Digital audio out (optical): 1 pc.
Output format:
PCM, Dolby Digital, MPEG
HDMI terminal
HDMI out (19 pin type A): 1 pc.
Output format:
PCM, MPEG, Dolby Digital,
Dolby Digital Plus
This unit supports “HDAVI Control 5
function.
Internal HDD capacity
[HCT23 0] 1TB
[HCT130] 500 GB
Other terminals
USB Port (Type A): 2 pcs.
SD Card Slot: 1 pc.
Common Interface slot: 2 pcs.
Compliant with CENELEC EN 50221:
February, 1997.
LAN (Ethernet) Port: 1 pc.
10BASE-T/100BASE-TX
Wireless LAN
Standard compliance: IEEE802.11a/b/g/n
Frequency range: 2.4 GHz/5 GHz band
Security
§
:
WPA™/WPA2™
(Encryption type: TKIP/AES,
Authentication type: PSK)
WEP (64 bit/128 bit)
SD Card
Compatible media: SD Memory Card
§1
Format: FAT12, FAT16, FAT32, exFAT
§2
Data that can be played: JPEG, MPO,
AVCHD format, MPEG-2, MP4
USB device
USB standard: USB2.0 High Speed
Format: FAT12, FAT16, FAT32, NTFS
Data that can be played: MP3, JPEG, MPO,
Xvid, MKV, MP4, MPEG-2
§
This unit supports WPA™ and WPA2™
encryption.
§1
Includes SDHC/SDXC cards.
Includes miniSD
TM
cards (need a miniSD
TM
adaptor).
Includes microSD
TM
/microSDHC
TM
/
microSDXC
TM
cards (need a microSD
TM
adaptor).
§2
SDXC only
DMR-HCT230_130EG_eng.book 100 ページ 2013年7月8日 月曜日 午後5時42分
Reference
VQT5C33
101
JPEG/MPO
Playable media: HDD, SD Card, USB device
Compatible pixels:
Between 34k34 and 8192k8192 pixels
(Sub sampling is 4:2:2 or 4:2:0)
Files: JPEG conforming to DCF
(Design rule for Camera File system)
MPO conforming to MPF
(Multi Picture Format)
Maximum numbers of folders and files:
This unit is not compatible with Motion JPEG or
Progressive JPEG.
MP3
Playable media: HDD, USB device
Compression rate: 32 kbps to 320 kbps
Sampling rate: 16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz
Maximum numbers of folders and files:
MKV
Playable media: USB device
MPEG-4 AVC (H.264) profile is up to High
Profile, Level 4.
AAC-LC, MP3, Dolby Digital audio, PCM,
Vorbis and FLAC can be decoded.
Maximum number of folders: 300 folders
(including the root folder)
Maximum number of files: 200 files
MP4
Playable media: SD Card, USB device
MPEG-4 AVC/H.264:
Up to High Profile, Level 4.2
Video resolution: Up to 1920k1080
MPEG-4 AAC-LC
Sampling rate: 8 kHz to 48 kHz
Number of audio channel: 1 or 2
HD-Video (High Definition)
Playable media: SD Card, USB device
Codec: MPEG-4 AVC/H.264
File Format: AVCHD format conforming
Maximum numbers of titles that can be
recorded
HDD,
USB HDD
999 titles
(When continuously recording for
long durations, titles are
automatically divided every 8 hours.)
Information for the files other than recorded
programmes
Media
Maximum
folders
Maximum
files
HDD 20000
SD Card 500 10000
USB device 500 10000
Media
Maximum
folders
Maximum
files
HDD 40000
USB device 300 3000
DMR-HCT230_130EG_eng.book 101 ページ 2013年7月8日 月曜日 午後5時42分
Reference
VQT5C33
102
Specifications
Depending on the content being recorded, the recording time may become shorter than indicated.
DR mode
HG, HX, HE, HL, HM, XP, SP, LP, EP modes
Recording modes and approximate recording times
Recording Mode HDD
[HCT230]
(1 TB)
[HCT130]
(500 GB)
DR (HD quality) 150 hours 75 hours
DR (SD quality) 422 hours 211 hours
Recording time of DR mode may vary depending on the bit rate of broadcasting:
High Definition (HD) quality: estimated bit rate is 14 Mbps
Standard Definition (SD) quality: estimated bit rate is 5 Mbps
Regarding recording time remaining:
Remaining time in the DR mode is calculated with a bit rate of 14 Mbps. But the bit rate differs
depending on the broadcast, so the displayed remaining time might be different from the actual
remaining time.
Recording Mode HDD
[HCT230]
(1 TB)
[HCT130]
(500 GB)
HG 157 hours 78 hours
HX 235 hours 117 hours
HE 353 hours 176 hours
HL 472 hours 235 hours
HM 684 hours 341 hours
XP 215 hours 107 hours
SP 431 hours 215 hours
LP 862 hours 430 hours
EP 1724 hours 860 hours
Regarding recording time remaining:
This unit records using a VBR (Variable bit rate) data compression system to vary recorded data
segments to match video data segments which may cause differences in the displayed amount of
time and space remaining for recording.
DMR-HCT230_130EG_eng.book 102 ページ 2013年7月8日 月曜日 午後5時42分
Reference
VQT5C33
103
Declaration of Conformity (DoC)
Hereby,Panasonic Corporation” declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative: Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany
This product is intended to be used in the following countries.
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Ireland, Italy, Iceland, Liechtenstein, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, United Kingdom, Switzerland
This product is intended for general consumer. (Category 3)
The WLAN feature of this product shall exclusively be used inside buildings.
This product on purpose to connect to access point of 2.4 GHz or 5 GHz WLAN.
The recording and playback of content on this or any other device may require permission from the owner of the copyright
or other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly
disclaims any right, ability or intention to obtain such permission on your behalf. It is your responsibility to ensure that your
use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation
for more information on the relevant laws and regulations involved or contact the owner of the rights in the content you wish
to record or playback.
Personal information handling
To provide functions and services of this unit, a device ID, device password and usage history
information are stored and managed securely in an appropriate security environment of Panasonic.
Please note that usage history and other information may be collected for purposes such as
improving products and services in such a way that individuals cannot be identified.
DMR-HCT230_130EG_eng.book 103 ページ 2013年7月8日 月曜日 午後5時42分
Reference
VQT5C33
104
Licenses
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and
Sony Corporation.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living
Network Alliance.
DVB and the DVB logos are trademarks of the DVB Project.
The “CI Plus” Logo is a trademark of CI Plus LLP.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and
non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1
Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial
activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be
implied for any other use. Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com
.
SDXC Logo is a trademark of SD-3C, LLC.
The “S” logo and Skype
TM
are trade marks of Skype.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “Miracast”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi
Alliance.
HDAVI Control
TM
is a trademark of Panasonic Corporation.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.
Android is a trademark of Google Inc.
DMR-HCT230_130EG_eng.book 104 ページ 2013年7月8日 月曜日 午後5時42分
Reference
VQT5C33
105
Rovi and Rovi Guide are trademarks of Rovi Corporation and/or its subsidiaries.
The Rovi Guide system is manufactured under license from Rovi Corporation and/or its subsidiaries.
The Rovi Guide system is protected by patents and patent applications filed in the US,
Europe, and other countries including one or more of the United States patents
6,396,546; 5,940,073; 6,239,794 issued to Rovi Corporation and/or its subsidiaries.
Rovi Corporation and/or its subsidiaries and related affiliates are not in any way liable for the accuracy or
availability of the program schedule information or other data in the Rovi Guide system and cannot
guarantee service availability in your area. In no event shall Rovi Corporation and/or its related affiliates
be liable for any damages in connection with the accuracy or availability of the program schedule
information or other data in the Rovi Guide system.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed
terms and conditions thereof shown in the Basic Settings menu.
At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact
information provided below, for a charge no more than our cost of physically performing source code distribution, a complete
machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the
obligation to do so, as well as the respective copyright notice thereof.
Contact Information: oss-cd-request@gg.jp.panasonic.com
The source code and the copyright notice are also available for free in our website below.
http://panasonic.net/avc/oss/diga/FCRCP13A.html
Vorbis, FLAC, WPA Supplicant
The software licenses are displayed when “Software Licence” in the Basic Settings menu is selected. (> 85)
DMR-HCT230_130EG_eng.book 105 ページ 2013年7月8日 月曜日 午後5時42分
Reference
VQT5C33
106
Index
A
Aspect . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80, 88
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . 19, 75
AVCHD . . . . . . . . . . . . . . . . . . . . . . . . 37, 40, 67
B
Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . 73
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
DVB Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . 75
HDD / USB HDD . . . . . . . . . . . . . . . . . . . . . . 77
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
C
CAM (Conditional Access Module)
. . . . . . . 12, 86
Channel information . . . . . . . . . . . . . . . . . . . 26
Channel List . . . . . . . . . . . . . . . . . . . . . . . 25, 76
Chapter . . . . . . . . . . . . . . . . . . . . . 39, 42, 49, 78
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
HOLD function . . . . . . . . . . . . . . . . . . . . . . . . 88
CI Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 86
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Common Interface . . . . . . . . . . . . . . . . . . 12, 81
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
AVCHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
D
Delete
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 78
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 78
E
Easy setting . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . 87
F
Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Format
HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
USB HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
FUNCTION MENU . . . . . . . . . . . . . . . . . . . . . 23
H
HDAVI Control . . . . . . . . . . . . . . . . . . . . . . . . 70
HDD
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Media information . . . . . . . . . . . . . . . . . . . . . . 6
M
Manual Tuning . . . . . . . . . . . . . . . . . . . . . . . . 76
Media Renderer . . . . . . . . . . . . . . . . . . . . . . . 64
Miracast
TM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
MKV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
N
Network
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Easy Network Setting . . . . . . . . . . . . . . . 21, 81
Miracast
TM
. . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Network Service . . . . . . . . . . . . . . . . . . . . . . 66
Smart Home Networking (DLNA) . . . . . . 62, 83
Wi-Fi Direct
TM
. . . . . . . . . . . . . . . . . . . . . . . . . 65
P
PAUSE LIVE TV . . . . . . . . . . . . . . . . . . . . . . . 28
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54, 56
PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 85
Playback menu . . . . . . . . . . . . . . . . . . . . . . . 71
Protection
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Q
Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
DMR-HCT230_130EG_eng.book 106 ページ 2013年7月8日 月曜日 午後5時42分
Reference
VQT5C33
107
R
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 33
Recording mode . . . . . . . . . . . . . . . . . . . 7, 102
Recording time . . . . . . . . . . . . . . . . . . . . . . . 102
Remote control . . . . . . . . . . . . . . . . . . . . . . . 10
HOLD function . . . . . . . . . . . . . . . . . . . . . . . . 88
Remote control code . . . . . . . . . . . . . . . . . . . 84
TV operation . . . . . . . . . . . . . . . . . . . . . . . . . 18
Remote Recording . . . . . . . . . . . . . . . . . . . . . 35
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . 85, 93, 95
REWIND LIVE TV . . . . . . . . . . . . . . . . . . . 28, 77
S
SD Card
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Media information . . . . . . . . . . . . . . . . . . . . 6, 8
miniSD / microSD . . . . . . . . . . . . . . . . . . . . . . 8
Setting
Auto Setup . . . . . . . . . . . . . . . . . . . . . . . 19, 75
Easy setting . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Skype
TM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . 54, 60
Smart Home Networking (DLNA) . . . . . . 62, 83
Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Media Renderer . . . . . . . . . . . . . . . . . . . . . . 64
Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Software (Firmware) Update . . . . . . . . . . . . . 86
T
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 33
Troubleshooting guide . . . . . . . . . . . . . . . . . 89
Easy Network Setting . . . . . . . . . . . . . . . . . . 98
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Tuning
Channel List . . . . . . . . . . . . . . . . . . . . . . . . . 76
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Manual Tuning . . . . . . . . . . . . . . . . . . . . . . . 76
Signal condition . . . . . . . . . . . . . . . . . . . . 76, 77
TV Guide
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 33
TV System . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
U
USB HDD
Cancellation of all USB HDD
Registrations . . . . . . . . . . . . . . . . . . . . . . . . . 78
Disconnection . . . . . . . . . . . . . . . . . . . . . 68, 78
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Media information . . . . . . . . . . . . . . . . . . . . 6, 8
Registration . . . . . . . . . . . . . . . . . . . . . . . 69, 78
USB memories
Media information . . . . . . . . . . . . . . . . . . . . 6, 8
V
Video
AVCHD . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 40
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
DIRECT NAVIGATOR . . . . . . . . . . . . . . . . . 37
MKV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Playback . . . . . . . . . . . . . . . . . . . . . . . . . 37, 40
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Xvid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
VIERA Link . . . . . . . . . . . . . . . . . . . . . . . . 70, 81
W
Wi-Fi Direct
TM
. . . . . . . . . . . . . . . . . . . . . . . . . 65
X
Xvid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
DMR-HCT230_130EG_eng.book 107 ページ 2013年7月8日 月曜日 午後5時42分
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling, please contact your local municipality.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
Note for the battery symbol (bottom symbol):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Manufactured by: Panasonic Corporation Kadoma, Osaka, Japan
Importer: Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
EU
Panasonic Corporation
Web Site: http://panasonic.net
© Panasonic Corporation 2013
p
VQT5C33
F0713MD0
DMR-HCT230_130EG_eng.book 108 ページ 2013年7月8日 月曜日 午後5時42分
103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-panasonic-dmr-hct-130-eg
  • Angabe bei Sender ARD-alpha: Keine Programmdaten erhalten. Drücken Sie auf "i" Eingereicht am 8-2-2022 18:11

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic Panasonic DMR HCT 130 EG wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic Panasonic DMR HCT 130 EG

Panasonic Panasonic DMR HCT 130 EG Bedienungsanleitung - Deutsch - 108 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info