Bedienungsanleitung Panasonic Panasonic SC-BT770 (Seite 21 von 52) (Englisch)

533959

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Getting started

VQT3D27

Wireless Setting

Network Easy Setting (Home Network Connection Check)

Network Easy Setting (Internet Connection Check)



≥ Refer to the operating instructions of the hub or router.

≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates settings relating

to the connection and security of wireless LAN devices. To see whether

your Wireless router supports WPS, check the Wireless router operating

instructions.

≥ You can perform this setup anytime by selecting “Network Easy Setting” in

the Setup menu. ( 40)

≥ You can redo these settings individually using “Network Settings”. ( 40)

≥ Do not use this unit to connect to any wireless network for which you do not

have usage rights.

During automatic searches in a wireless network environment, wireless

networks (SSID*) for which you do not have usage rights may be

displayed; however, using these networks may be regarded as illegal

access.

≥ After performing network settings on this unit, the settings (encryption level,

etc.) of the Wireless router might change. When you have trouble getting

online on your PC, perform the network settings on your PC in accordance

with the settings of Wireless router.

≥ Please be aware that connecting to a network without encryption may

result in the content of the communication being illegitimately viewed by a

third party, or the leaking of data such as personal or secret information.

* An SSID (Service Set IDentification) is a name used by wireless LAN to

identify a particular network. Transmission is possible if the SSID matches

for both devices.

If you have more than one Panasonic player/recorder and the

remote control operates both products at once, you will

need to change the remote control code on one product to

prevent this occurrence. ( 40, “Remote Control Code”)

When you experience problems

with settings

Display Check the following

A conflict with another

device occurred.

≥ Please wait a few moments, and

then try again.

A time out error

occurred.

≥ Setting of the Wireless router for

MAC Address etc.

≥ The signal may be weak.

≥ The SSID ( right) and the

encryption key of the Wireless

router.

≥ Please wait a few moments, and

then try again.

An authentication

error or a time out

error occurred.

A device error

occurred.

≥ Contact our Customer Service

Center or your nearest dealer.

Display

Check the

following

1. LAN cable connection or

Wireless setting

:Fail

≥ Connection of

the LAN

cables ( 17)

2. IP address setting :Fail

3. Connection to gateway :Fail

1. LAN cable connection or

Wireless setting

:Pass ≥ Connection

and settings of

the hub and

router

≥ Settings of “IP

Address /

DNS Settings”

( 40)

2. IP address setting :Fail

3. Connection to gateway :Fail

1. LAN cable connection or

Wireless setting

:Pass

2. IP address setting :Pass

3. Connection to gateway :Fail

Wireless Settings

Failed to complete.

A conflict with another device occurred.

Do you want to configure wireless network connection

setting again ?

Yes No

Network Easy Setting (Home Network Connection Check)

Yes No

Complete.

1. LAN cable connection

2. IP address setting

3. Connection to gateway

LAN cable is not connected.

Please check the connection.

Select “Yes” and press [OK] to check network

connection again. Select “No” and press [OK]

to finish Network Easy Setting.

: Fail

Display Check the following

Cannot find the server.

(Error code: B019)

≥ “Primary DNS” and “Secondary

DNS” Settings of “IP Address /

DNS Settings” ( 40)

Failed to connect to the

server.

(Error code: B020)

≥ The server may be busy or the

service may have been

suspended. Please wait a few

moments, and then try again.

≥ Settings of “Proxy Server

Settings” ( 40) and the router.

Reprogramming the remote

control

Network Easy Setting (Internet Connection Check)

Complete.

- Connection to the Internet : Fail(Error code: B019)

Failed the connection test.

Cannot find the server.(Error code: B019)

Please refer to the owner's manual for the cause of

the error and the solution for it.

Press [OK].

SC-BTT770_370_270P_eng.book 21 ページ２０１０年１２月１６日　木曜日　午後９時５１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic Panasonic SC-BT770 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic Panasonic SC-BT770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info