522673
88
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
88
Q-Link
Preparations
Connect the DVD Recorder / VCR with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK”
Q-Link connection p. 86
Use fully wired SCART cable.
Set up the DVD Recorder / VCR. Read the manual of the recorder.
Q-Link terminal setup in the Setup Menu “Q-Link” (p. 34), “AV1 / AV2 out” (p. 34)
Download Analogue channel setting “Analogue channel download” (see below)
Features available
Analogue channel download
Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue
is still broadcast). Digital channel settings are not downloaded.
To download the Analogue channel settings
“Q-Link Download” (p. 34) or “Auto Setup” in Analogue mode
(p. 41) or “Auto Setup” - when first using the TV (p. 12)
Direct TV Recording - What you see is What you record
Recording the current programme on a DVD Recorder / VCR immediately.
EXIT
G
U
I
D
E
DIRECT TV REC
DIRECT TV REC
Available conditions:
Picture source Mode Recording from
Analogue
TV TV monitor out
AV Recorder’s tuner
freesat, DVB, Other Sat. TV TV monitor out
AV
( watching recorder’s tuner)
AV Recorder’s tuner
AV
( watching recorder’s external input)
AV
Recorder’s
external input
AV
( watching TV’s external input)
AV TV monitor out
When Direct TV Recording is performed, the recorder is automatically
turned on if it is in Standby mode.
Changing channel or turning off the TV is available while the recorder is
recording from its own tuner.
Changing channel is not available while the recorder is recording from
the TV tuner.
To stop recording
Unlock the tuner
G
U
I
D
E
Unlock
Continue
Tuner Locked
Press EXIT to unlock and stop recording
EXIT
Power on link and Easy playback
When the DVD Recorder / VCR starts playback or the direct navigator / function menu for the
equipment is activated, the TV is turned on and the input mode is switched automatically so that you
can view the content. (Only when the TV is in Standby mode.)
Power off link
When the TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when
the videocassette or disc is not active.)
This function will work even if the TV enters Standby mode automatically by auto power standby function.
“DATA LOGIC” (a trademark of Metz Corporation)
“Easy Link” (a trademark of Philips Corporation)
“Megalogic” (a trademark of Grundig Corporation)
“SMARTLINK” (a trademark of Sony Corporation)
Note
Some recorders are not compatible. Read the manual of the recorder.
Link Functions
(
Q-Link
VIERA Link
)
88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic Panasonic TX-P50V20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic Panasonic TX-P50V20

Panasonic Panasonic TX-P50V20 Kurzanleitung - Englisch, Holländisch - 28 seiten

Panasonic Panasonic TX-P50V20 Bedienungsanleitung - Holländisch - 104 seiten

Panasonic Panasonic TX-P50V20 Bedienungsanleitung - Dänisch - 100 seiten

Panasonic Panasonic TX-P50V20 Bedienungsanleitung - Polnisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info