215762
33
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
PICTURE Menu
ENGLISH - 33
Settings
J MPEG NR
You can switch the automatic noise reduction
system for MPEG format images on/off. The
system minimizes block noise and mosquito noise
to eliminate jagged edges, providing an overall
smoother image. Press I H to select the required
setting.
ON:Active
OFF: Deactive
J CINEMA REALITY
You can switch the automatic image synchronizer
on/off for 24 frames a second images, such as
movies. Press I H to select the required setting.
ON:Active
OFF: Deactive
J TV-SYSTEM
When the video signal is changed, the setting switches
automatically.
You can switch the setting manually to match the video
data. Press I H to cycle through the options.
You can save the adjusted PICTURE settings with up to
5 in each of 2 signal groups.
1. Adjust the different items of the PICTURE menu.
2. Select MEMORY SAVE and press ENTER.
3. Select MEMORY1 - 5 to save and press ENTER.
The confirmation screen is displayed.
: In use
: Not in use
Select ALL DELETE to clear all the saved
settings.
4. Select OK and press ENTER.
To cancel, select CANCEL and press ENTER,
or press the RETURN button.
You can access saved settings instantly. See “Loading
a saved setting” on page 25.
1. Select the required setting from MEMORY1 - 5.
Undefined setting will not be displayed.
2. Press ENTER to activate the selected setting.
The current selected signal is displayed when
PC/COMPONENT/HDMI equipment is connected.
NOTE:
MPEG NR is for MPEG images only.
MPEG NR is not available with PC and HDMI
(VGA60) signals.
NOTE:
CINEMA REALITY is available with interlace
signals only.
If the CINEMA REALITY is different from the
required setting of the image, select OFF.
AUTO
SECAM
PAL-N
PAL-M
NTSC
NTSC 4.43
PAL
MEMORY SAVE
VIDEO, S-VIDEO, COMPONENT,
HDMI (not including VGA60),
1 125 (1 080)/50i, 1 125 (1 080)/60i,
1 125 (1 080)/50p and
1 125 (1 080)/60p signals in PC
connection
MEMORY1 - 5
VGA60 in HDMI connection, PC not
including 1 125 (1 080)/50i,
1 125 (1 080)/60i, 1 125 (1 080)/50p
and 1 125 (1 080)/60p
MEMORY1 - 5
MEMORY LOAD
NOTE:
If you have not saved any settings, MEMORY1 - 5
will not be displayed.
SIGNAL MODE
NOTE:
See “List of compatible signals” on page 45.
PT-AE1000U.book Page 33 Monday, October 16, 2006 1:40 PM
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic pt ae1000e wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info