Bedienungsanleitung Panasonic pt ae500 (Seite 21 von 30) (Englisch)

215421

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

ENGLISH-41

Adjustments and settings

40-ENGLISH

Adjusting the position

Press the F or G button to select

an item, and then press the I or H

button to change the setting.

For items with bar scales, press the

ENTER button or the I or H button

to display the adjustment screen,

and then Press the I or H button

to make the adjustment.

When an S-VIDEO/VIDEO/DVI

signal is being input.

B When a DVI signal is being input,

only “ASPECT” can be adjusted.

When a YPBPR signal is being input

When a PC signal is being input

POSITION

H-POSITION 0

V-POSITION 0

ASPECT 16:9

SELECT ENTER ESC

Horizontal position

(H-POSITION)

(S-VIDEO/VIDEO/YPBPR/PC only)

To move the picture to the left: I button

To move the picture to the right: H button

Vertical position

(V-POSITION)

(S-VIDEO/VIDEO/YP

BPR/PC only)

To move the picture down: I button

To move the picture up: H button

DOT CLOCK

(PC only)

Periodic striped pattern interference

(noise) may occur when a striped

pattern such as the one below is

projected. If this happens, press the

I or H button to adjust so that any

such noise is minimised.

CLOCK PHASE

(PC/YPBPR only)

Adjust the “DOT CLOCK” setting

first before carrying out this

adjustment. Press the I or H

button to adjust so that the noise

level is least noticeable.

POSITION

H-POSITION 0

V-POSITION 0

DOT CLOCK 0

CLOCK PHASE 0

ASPECT 4:3

AUTO SETUP

SELECT ENTER ESC

When the input signal is from a

PC, first select “AUTO SETUP”

and then press the ENTER button

to initiate automatic positioning.

If the optimum setting is not

obtained when “AUTO SETUP” is

carried out, adjust by the following

procedure.

POSITION

H-POSITION 0

V-POSITION 0

CLOCK PHASE 0

ASPECT 4:3

SELECT ENTER ESC

ASPECT

Refer to page 28.

AUTO SETUP

(PC only)

“H-POSITION”, “V-POSITION”,

“DOT CLOCK” and “CLOCK

PHASE” are automatically adjusted

according to the input signal.

Changing the display language

Indicates the language which is

currently set

# Select “LANGUAGE” from the “MAIN MENU” and then press the

ENTER button.

$ Press the F or G button to select a language and then press the

ENTER button.

LANGUAGE ENGLISH

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

SELECT ENTER ESC

Turning off the picture momentarily

(SHUTTER)

The “SHUTTER” function can be used to momentarily turn off the picture

when the projector is not being used for short periods of time. The projector

uses less power in “SHUTTER” mode than it does in normal projection

mode.

# Select “SHUTTER” from the “MAIN MENU” and then press the

ENTER button.

$ Press any button on either the projector or remote control unit

(except the LIGHT button) to return to normal operating mode.

B When YPBPR signals are being

input, “CLOCK PHASE” can be

adjusted only when HDTV60/

HDTV50/750p signals are

being input.

NOTE:

B When the “ASPECT” is set to

“V SCROLL” (page 28), “AUTO

SETUP” cannot be performed.

NOTE:

If signals with a dot clock

frequency of 100 MHz or higher

are being input, interference

may not be completely

eliminated when the “DOT

CLOCK” and “CLOCK PHASE”

adjustments are carried out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic pt ae500 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info