Bedienungsanleitung Panasonic PT-AE7000EA (Seite 16 von 104) (Englisch)

543815

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Precautions for use

16 -

ENGLISH

Important

Information

Cautions on use

In order to view clear video images

■

Clear, high contrast video can be viewed when curtains are closed and lights near the screen are extinguished in

order to stop light from reaching the screen.

In some rare cases, depending on the usage environment a “ickering” may appear on the screen due to the

effects of air from the exhaust port or hot/cold air from air conditioners. Do not set up this projector in a situation

where air from the exhaust of this device or other devices, or air from air conditioners is circulated to the front of

this device.

The focus of high brightness projection lenses may not be stable immediately after turning power on due to the

effects of heat from light coming from light sources. Focus stabilizes 30 minutes after video projection starts.

Do not touch the surface of the projection lens with bare hands.

■

If ngerprints or dirt are left on the projection lens, they will be enlarged and projected and will prevent the

viewing of clear video images. Also, always replace the lens cover when not using the projector.

About LCD panels

■

LCD panels are manufactured using high precision technologies, but in some cases they may have dead

pixels, or permanently lit pixels. Please understand that this is not a fault.

Also, projecting a still image for extended periods of time may lead to afterimages on LCD panels. Please be

aware that in some cases these afterimages may not disappear completely.

About optical components

■

If using in an environment with a high temperature, or where dust or tobacco smoke is present, the

replacement cycle of optical components such as LCD panels and polarizing plates may shorten even after

less than one year of use. For more details, please contact your dealer.

About the lamp

■

This product uses an internal high pressure mercury lamp for the light source.

High pressure mercury lamps have the following characteristics.

Brightness decreases with usage time.

In some cases, the lamp may make a large sound, crack, and reach the end of its lifespan as a result of shocks,

damage, and deterioration related to usage period.

Large disparities occur in lifespan due to individual properties and usage conditions. Lifespan is especially

affected if you use the lamp continuously for more than 6 hours or switch it ON/OFF rapidly.

Very occasionally the lamp may crack after starting projection.

The possibility of cracking increases as the lamp nears the end of its lifespan.

If the lamp cracks, gas may be leaked from inside and smoke may be seen.

Please prepare a spare lamp in advance.

About disposal

To dispose of the product, inquire your local authorities or dealer for correct methods of disposal.

The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct

methods of disposal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-AE7000EA Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-AE7000EA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info