Bedienungsanleitung Panasonic PT-AE8000EH (Seite 17 von 75) (Englisch)

511494

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

5. Notification for service operation

5. 1. Before service operation

5. 1. 1. LCD panel

5. 1. 2. Lamp unit

* Lamp unit as an optional accessories, distribution through commercial channel.

* Do not use any other lamp unit than indicated above.

2. Philips driver is required for replacing the lamp.

3. When replacing the lamp, make sure to grasp the handle portion of the lamp unit.

5. When throwing the lamp away, consult local municipalities about the way to do.

[Attention]

5. 1. 3. Air filter unit

* Clean the Air filter after every 100 hours of usage.

* A replacement air filter kit (TXFKN01RYNZP) is provided with a replacement lamp unit, ET-LAA410.

1. If the air filter is excessively dirty, the internal temperature of the projector increases and may cause malfunction.

2. Do not use the projector without attaching the air filter.

3. The air filter should be replaced when cleaning is ineffective and when replacing the lamp unit.

5. 1. 4. Repair operation

1. When electrifying the projector for the check and adjustment with top case taken off, the strong light emits from

the lighting cover and its around.

Wear the anti -ultraviolet rays glasses and shade.

2. While the fan is working, do not pull the plug out nor disconnect the breaker.

* When the monitor of power supply lamp turns red and the fan stops, disconnecting can be done.

3. Repair should be done with the power supply off.

* When replacing the print board, the internal electrical parts can be broken by the static electricity of clothes or

human body. Be careful of static electricity and wear the anti-static electricity globes.

4. After finishing the repair, check whether it works properly or not.

5. Check the image with 10 steps or gray scales that can show the gradation and perform self-check.

1. Be careful for handling the lamp because it is made of glass and might be

exploded by hitting hard object or fall in down.

4. The lamp might be exploded. Be careful for the case that the blown glasses are scattered around.

The replacement operation should be done with the highest care.

When the projector is set on the ceiling, make sure not to work just under the lamp unit or not to be closer to the lamp.

Please read carefully the page 'CAUTIONS FOR THE SAFETY', 'BEFORE USING', 'CHECK AND REPLACEMENT OF

PARTS' on the instruction book to know about lamp unit, how to use lamp and how to replace the lamp unit.

1. The display unit of this projector comprises three LCD panels. Although an LCD panel is a product of high precision

technology, some of the pixels on the projected image may be missing or constantly lit.

Please note that this is not a malfunction.

2. Displaying a still image for a longer time may result in an after-image on the LCD panels.

If this ha

ens

dis

the all white screen in the test

attern for an hour or more.

Replacement lamp unit : ET-LAA410

Air Filter Kit

(TXFKN01RYNZP)

INF - 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-AE8000EH Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info