543816
98
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
Technical information
98 -
ENGLISH
Appendix
Cable specications
(When connected to a personal computer)
Control commands
Commands available when controlling this projector from a computer are as follows.
<Operation commands>
Command
Control contents Remarks
PON POWER ON In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp on control.
If a PON command is received while the cooling fan is operating after the lamp has
z
switched off, the lamp is not turned back on unless approximately 85 seconds have
passed in order to protect the lamp.
POF POWER OFF
IIS
SWITCH
INPUT
Parameters
CP1 = COMPONENT IN SVD = S-VIDEO IN
VID = VIDEO IN HD1 = HDMI 1 IN HD2 = HDMI 2 IN HD3 = HDMI 3 IN
RG1 = COMPUTER IN
OMN MENU Displays the main menu.
OEN ENTER Activates the selected items in the menu mode.
OBK RETURN Returns to the previous menu or escaping from the menu mode.
OCU
OCD
OCL
OCR
Navigation buttons
(▲▼◄►)
OCU = ▲ cursor OCD = ▼ cursor
OCL = ◄ cursor OCR = ► cursor
OLE LENS
Displays the test patterns for adjusting [ZOOM/FOCUS].
([RETURN] or [MENU] when nishing)
OST DEFAULT Resets to the factory default setting. (
page 33)
OFZ FREEZE
Freezes the projected screen. (
page
79)
0 = OFF, 1 = ON
FC1 FUNCTION BUTTON Activates the function allocated to the <FUNCTION> button of the remote control.
OSH BLANK
Turns off the projection temporarily.
Sends the command to switch between ON and OFF. (
page
79)
Do not rapidly switch between ON/OFF.
While the BLANK function is ON, it is switched OFF when any command is received.
OVM PICTURE
Activates the [PICTURE] menu. Send the command to switch menu items.
(
page
40)
OWM WAVEFORM
Parameter
0 = OFF 1 = FULL SCAN(Y) 2 = FULL SCAN(R) 3 = FULL SCAN(G)
4 = FULL SCAN(B) 5 = SINGLE LINE SCAN(Y) 6 = SINGLE LINE SCAN(R)
7 = SINGLE LINE SCAN(G) 8 = SINGLE LINE SCAN(B)
VS1 ASPECT
Switches the aspect ratio. Aspect ratio is switched each time this command is sent.
(
page
58)
VPM PICTURE MODE
Switches the [PICTURE MODE]. (
page
40)
Parameter
NOR = NORMAL DYN = DYNAMIC 709 = REC709 DCN = D-CINEMA
CN1 = CINEMA1 CN2 = CINEMA2 GM1 = GAME
OOT SLEEP
Sets the duration of time after which the power is to be turned off automatically. (
page
76)
0 = OFF 1 = 60MIN. 2 = 90MIN. 3 = 120MIN. 4 = 150MIN.
5 = 180MIN. 6 = 210MIN. 7 = 240MIN.
O3D 3D SETTINGS Displays the [3D SETTINGS] menu screen.
1
2
3
4
5
6
7
8
9
NC
NC
NC
NC
NC
NC
NC
NC
1
2
3
4
5
6
7
8
9
Projector PC (DTE)
98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic PT-AT5000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic PT-AT5000

Panasonic PT-AT5000 Bedienungsanleitung - Deutsch - 104 seiten

Panasonic PT-AT5000 Bedienungsanleitung - Französisch - 104 seiten

Panasonic PT-AT5000 Bedienungsanleitung - Italienisch - 104 seiten

Panasonic PT-AT5000 Bedienungsanleitung - Spanisch - 104 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info