Bedienungsanleitung Panasonic PT-CX200E (Seite 54 von 79) (Englisch)

542438

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

Setting

- ENGLISH

Settings

Standby mode

This function can set the electric power when the

projector is standing by.

Press ▲▼ to select [Standby mode] 1 )

and then press the <SELECT> button.

Press ▲▼ to switch between the items 2 )

as below.

Eco

Restricts some functions in

standby mode to reduce power

consumption.

Network

Does not restrict functionality

even in standby mode.

Note

When selecting [Network], the cooling fans may be

running depending on the temperature inside the

projector even if the projector is turned off.

Refer to "Operating Instructions - Network Operations

If Standby mode is set to [Eco], you cannot use network

functions when the projector is standing by. Also, you

cannot use some RS-232C protocol commands.

If set to [Network], you can use network functions when

the projector is standing by.

Power management

For reducing power consumption as well as

maintaining the lamp life, the Power management

function turns off the projection lamp when the

projector is not operated for a certain period.

Press ▲▼ to select [Power 1 )

management].

Press ► or the <SELECT> button to 2 )

access the submenu.

Mode

Press ▲▼ and then press the 1 )

<SELECT> button to select one mode

among the items as below.

Ready

When the lamp has been fully cooled

down, the <ON(G)/STANDBY(R)>

indicator changes to green blinking.

In this condition, the projection lamp

will be turned on if the input signal

is reconnected or any button on the

control panel or remote control is

pressed

Shut

down

When the lamp has been fully cooled

down, the power will be turned off.

Off

[Power management] function is off.

Timer

Press ▲▼ to select [Timer] and then 1 )

press the <SELECT> button.

Press ▲▼ to set the Timer(1~30min).2 )

Direct on

Press ▲▼ to select [Direct on] and 1 )

then press the <SELECT> button.

Press ▲▼ to switch between [On] and 2 )

[Off].

When this function is set to [On], the projector

will be automatically turned on just by

connecting the AC power cord to a wall outlet.

Be sure to turn off the projector properly. If the

projector is turned off in the incorrect sequence,

the [Direct On] function does not work properly.

Closed caption

[

Only for NTSC input

]

Press ▲▼ to select [Closed caption].1 )

Press ► or the <SELECT> button to 2 )

enter the submenu.

Closed caption

Press ▲▼ to select [Closed caption] 1 )

and then press the <SELECT> button.

Press ▲▼ to select [Off], [CC1], [CC2], 2 )

[CC3] or [CC4].

Color

Press ▲▼ to select [Color] and then 1 )

press the <SELECT> button.

Press▲▼ to select [Color] or [White].2 )

Note

The closed caption is mainly used in the north America.

This function shows the text information contained in the

image signal. Captions may not be displayed on some

devices or software.

You can select [Closed caption] when [NTSC] signal is

input.

Part of characters may not displayed when high

compensation values are set in [Keystone].

Closed captions are not displayed while the menu screen

appears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-CX200E Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-CX200E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info