Bedienungsanleitung Panasonic PT-DS20K2 (Seite 104 von 223) (Englisch)

598881

104

Zoom out

Zoom in

Vorherige Seite

1/223

Nächste Seite

Chapter 4 Settings — [3D SETTINGS] menu

104 - ENGLISH

Select [9] or [10] for the rst projector.

Select [6], [7], or [8] for the second and subsequent projectors.

f Stereo synchronization is a signal having a 50 % duty cycle where High is for the left eye and Low is for

the right eye.

f “H” is output to the 3D image display and “L” is output to the 2D image display from the terminal for which

3D trigger output is selected.

Note

f [11] in [3D SYNC MODE] is the setting when the 3D IR transmitter TY-3DTRW of Panasonic (production discontinued) is used with the

projector. Consult your dealer regarding the connection method.

[3D INPUT FORMAT]

Set the 3D format for the image signals being input.

Set a 3D format that matches the input signal.

1) Press as to select [3D INPUT FORMAT].

2) Press the <ENTER> button.

f The [3D INPUT FORMAT] screen is displayed.

3) Press as to select a 3D format.

[AUTO]

Automatically detects 3D format of input image signals to display images.

[NATIVE] Forcibly displays 2D images regardless of input image signals.

[SIMULTANEOUS]

Forcibly displays 3D images in simultaneous format regardless of input video signals.

[SIDE BY SIDE] Forcibly displays 3D images in side by side format regardless of input image signals.

[TOP AND BOTTOM] Forcibly displays 3D images in top and bottom format regardless of input image signals.

[LINE BY LINE]

Forcibly displays 3D images in line by line format regardless of input video signals.

[FRAME SEQUENTIAL]

Forcibly displays 3D images in frame sequential format regardless of input image signals.

*1 Only during DVI-D or HDMI input

*2 Only during 3G-SDI level B input

*3 Only while signals other than interlaced signals are input

*4 Only while progressive signals with the vertical scanning frequency of 100 Hz or 120 Hz are input to the <RGB1>/<RGB2>/<DVI-D> terminals

4) Press the <ENTER> button.

Note

f When [AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL] is set, 3D images

are not displayed with the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING]. In [AUTO], however, this only occurs when 3D format

can be recognized.

f This may not function properly for some connected external devices.

[LEFT/RIGHT SWAP]

Display images by inverting the timing when the left and right images are swapped. Change the setting when

there is something wrong with the 3D image being viewed.

1) Press as to select [LEFT/RIGHT SWAP].

2) Press qw to switch the item.

f The items will switch each time you press the button.

[NORMAL] Do not change the [NORMAL] setting if the 3D images are displayed correctly.

[SWAPPED] Select this item when left and right 3D images are swapped to be displayed.

Note

f This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].

[3D COLOR MATCHING]

Switch the color matching correction data applied to displayed image.

1) Press as to select [3D COLOR MATCHING].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic PT-DS20K2 Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic PT-DS20K2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info